nach oben

Journal of Materials Engineering and Performance

Erschienen in:

10.02.2020

Effect of Electropulsing on Microstructure and Properties of Severely Plastically Deformed Pure Copper Sheet

verfasst von: Jie Zhu, Shan Liu, Yao Lin, Guangchun Wang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The plasticity of a material generally decreases after grain refinement by severe plastic deformation (SPD). In this paper, an energy-efficient electropulsing method is introduced to improve the plasticity of materials formed by the repetitive roll-bending and straightening (RRBS) process. The influence of the current density, frequency, pulse width and duration on the microstructure and properties of copper sheets that underwent SPD was experimentally investigated. The experimental results show that electropulsing reduced the hardness of the material, improved the plasticity and refined the grains. After the electropulsing treatment, the maximum elongation of the pure copper sheet that underwent a 20-pass RRBS process increased from 3.70 to 24.45%, and the average grain size was refined from 60 to 41 μm. The electropulsing parameters, such as the current density and frequency, instantaneously changed the incoming current intensity into the samples and had a significant influence on the microstructure and properties of the materials. The thermal effect and the athermal effect impacted the dynamics and thermodynamics of the materials, which promoted the movement of dislocations, causing significant changes in the microstructure and properties of the material in a short time.

Vorheriger Artikel An Investigation into Thermal History and Its Correlation with Mechanical Properties of PA12 Parts Produced by Selective Laser Sintering Process

Nächster Artikel Effect of Laser Positioning on the Microstructure and Properties of NiTi-Copper Dissimilar Laser Welds

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

R. Valiev, Nanostructuring of Metals by Severe Plastic Deformation for Advanced Properties, Nat. Mater., 2004, 3(8), p 511–516CrossRef

M.A. Meyers, A. Mishra, and D.J. Benson, Mechanical Properties of Nanocrystalline Materials, Prog. Mater Sci., 2006, 51(4), p 427–556CrossRef

R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu, and T.C. Lowe, Paradox of Strength and Ductility in Metals Processed Bysevere Plastic Deformation, J. Mater. Res., 2002, 17(01), p 5–8CrossRef

C. Koch, Optimization of Strength and Ductility in Nanocrystalline and Ultrafine Grained Metals, Scr. Mater., 2003, 49(7), p 657–662CrossRef

C. Liang and K. Lin, The Microstructure and Property Variations of Metals Induced by Electric Current Treatment: A Review, Mater. Charact., 2018, 145, p 545–555CrossRef

Z. Zimniak and G. Radkiewicz, The Electroplastic Effect in the Cold-Drawing of Copper Wires for the Automotive Industry, Arch. Civ. Mech. Eng., 2008, 8(2), p 173–179CrossRef

Z. Xu, G. Tang, S. Tian, and J. He, Research on the Engineering Application of Multiple Pulses Treatment for Recrystallization of Fine Copper Wire, Mat. Sci. Eng. A., 2006, 424(1-2), p 300–306CrossRef

Z. Xu, G. Tang, S. Tian, F. Ding, and H. Tian, Research of Electroplastic Rolling of AZ31 Mg Alloy Strip, J. Mater. Process. Tech., 2007, 182(1-3), p 128–133CrossRef

O.S. Mazitov and S.V. Lebediev, The Influence of Electrical Current Pulses on the Plastic Deformation of Copper, Fizika., 2016, 25, p 12–15

10.

Y.H. Liao, C.L. Liang, K.L. Lin, and A.T. Wu, High Dislocation Density of Tin Induced by Electric Current, AIP Adv., 2015, 5(12), p 127210CrossRef

11.

J.D. Guo, X.L. Wang, and W.B. Dai, Microstructure Evolution in Metals Induced by High Density Electric Current Pulses, Mater Sci Tech. Lond., 2015, 31(13a), p 1545–1554CrossRef

12.

P. Liang and K. Lin, Non-deformation Recrystallization of Metal with Electric Current Stressing, J. Alloy. Compd., 2017, 722, p 690–697CrossRef

13.

R.F. Zhu, J.N. Liu, G.Y. Tang, S.Q. Shi, and M.W. Fu, Properties, Microstructure and Texture Evolution of cold Rolled Cu Strips Under Electropulsing Treatment, J. Alloy. Compd., 2012, 544(24), p 203–208CrossRef

14.

R.F. Zhu, J.N. Liu, G.Y. Tang, S.Q. Shi, M.W. Fu, and Z.T.H. Tse, The Improved Superelasticity of NiTi Alloy Via Electropulsing Treatment for Minutes, J. Alloy. Compd., 2014, 584, p 225–231CrossRef

15.

Y. Zhou, S. Xiao, and J. Guo, Recrystallized Microstructure in Cold Worked Brass Produced by Electropulsing Treatment, Mater. Lett., 2004, 58(12-13), p 1948–1951CrossRef

16.

Y. Zhou, W. Zhang, B. Wang, and J. Guo, Ultrafine-Grained Microstructure in a Cu-Zn Alloy Produced by Electropulsing Treatment, J. Mater. Res., 2003, 18(08), p 1991–1997CrossRef

17.

Y.H. Zhu, S. To, W.B. Lee, X.M. Liu, Y.B. Jiang, and G.Y. Tang, Effects of Dynamic Electropulsing on Microstructure and Elongation of a Zn-Al Alloy, Mater. Sci. Eng. A., 2009, 501(1-2), p 125–132CrossRef

18.

D. Fabrègue, B. Mouawad, and C.R. Hutchinson, Enhanced Recovery and Recrystallization of Metals Due to an Applied Current, Scr. Mater., 2014, 92, p 3–6CrossRef

19.

Z.S. Xu and Y.X. Chen, Effect of Electric Current on the Recrystallization Behavior of Cold Worked α-Ti, Scr. Mater., 1988, 22(2), p 187–190

20.

M. Kim, K. Lee, K.H. Oh, I. Choi, H. Yu, S. Hong, and H.N. Han, Electric Current-Induced Annealing During Uniaxial Tension of Aluminum Alloy, Scr. Mater., 2014, 75, p 58–61CrossRef

21.

S.W. Chen and C.M. Chen, Electromigration Effect Upon the Sn/Ag and Sn/Ni Interfacial Reactions at Various Temperatures, Acta Mater., 2002, 50(9), p 2461–2469CrossRef

22.

S.W. Chen, C.M. Chen, and W.C. Liu, Electric Current Effects Upon the Sn/Cu and Sn/Ni Interfacial Reactions, J. Electron. Mater., 1998, 27(11), p 1193–1199CrossRef

23.

C.M. Chen and S.W. Chen, Electromigration Effect Upon the Zn/Ni and Bi/Ni Interfacial Reactions, J. Electron. Mater., 2000, 29(10), p 1222–1228CrossRef

24.

R. Zhu, Y. Jiang, L. Guan, H. Li, and G. Tang, Difference in Recrystallization Between Electropulsing-Treated and Furnace-Treated NiTi Alloy, J. Alloy. Compd., 2016, 658, p 548–554CrossRef

25.

G. Hu, Y. Zhu, G. Tang, C. Shek, and J. Liu, Effect of Electropulsing on Recrystallization and Mechanical Properties of Silicon Steel Strips, J. Mater. Sci. Technol., 2011, 27(11), p 1034–1038CrossRef

26.

J. Park, H. Jeong, S. Jin, M. Kim, K. Lee, J.J. Kim, S. Hong, and H.N. Han, Effect of Electric Current on Recrystallization Kinetics in Interstitial Free steel and AZ31 Magnesium Alloy, Mater. Charact., 2017, 133, p 70–76CrossRef

27.

Y. Liu, J. Fan, H. Zhang, W. Jin, H. Dong, and B. Xu, Recrystallization and Microstructure Evolution of the Rolled Mg-3Al-1Zn Alloy Strips Under Electropulsing Treatment, J. Alloy. Compd., 2015, 622, p 229–235CrossRef

28.

K. Huang, C. Cayron, and R.E. Logé, The Surprising Influence of Continuous Alternating Electric Current on Recrystallization Behaviour of a Cold-Rolled Aluminium Alloy, Mater. Charact., 2017, 129, p 121–126CrossRef

29.

J. Zhu and G.C. Wang, Grain Refinement and Its Microstructure in Repetitive Roll Bending and Straightening of Copper Sheets, Mater. Res. Express., 2019, 6(7), p 076540CrossRef

30.

O.A. Troitskii, Pressure Shaping by the Application of a High Energy, Mater. Sci. Eng. A., 1985, 75(1-2), p 37–50CrossRef

31.

T.A. Perkins, T.J. Kronenberger, and J.T. Roth, Metallic Forging Using Electrical Flow as an Alternative to Warm/Hot Working, J Manuf Sci E., 2007, 129(1), p 84–94CrossRef

32.

C.D. Ross, D.B. Irvin, and J.T. Roth, Manufacturing Aspects Relating to the Effects of Direct Current on the Tensile Properties of Metals, J. Eng. Mater. Technol., 2007, 129(2), p 342–347CrossRef

33.

J. Magargee, F. Morestin, and J. Cao, Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically Assisted Deformation, J. Eng. Mater. Technol., 2013, 135(4), p 041003CrossRef

34.

X. Wang, J. Xu, Z. Jiang, W. Zhu, D. Shan, B. Guo, and J. Cao, Size Effects on Flow Stress Behavior During Electrically-Assisted Micro-Tension in a Magnesium Alloy AZ31, Mater. Sci. Eng. A., 2016, 659, p 215–224CrossRef

35.

Y. Zhou, R. Qin, S. Xiao, G. He, and B. Zhou, Reversing Effect of Electropulsing on damage of 1045 Steel, J. Mater. Res., 2000, 15(05), p 1056–1061CrossRef

36.

D.W. Tang, B.L. Zhou, H. Cao, and G.H. He, Thermal Stress Relaxation Behavior in Thin Films Under Transient Laser-Pulse Heating, J. Appl. Phys., 1993, 73(8), p 3749CrossRef

37.

H. Conrad, A.F. Sprecher, W.D. Cao, and X.P. Lu, Electroplasticity—The Effect of Electricity on the Mechanical Properties of Metals, JOM, 1990, 42(9), p 28–33CrossRef

38.

H. Conrad, Effects of Electric Current on Solid State Phase Transformations in Metals, Mater. Sci. Eng. A., 2000, 287(2), p 227–237CrossRef

39.

D. Gupta, Diffusion Processes in Advanced Technological Materials, William Andrew Press, New York, 2005, p 12CrossRef

40.

Y. Zhou, J. Guo, W. Zhang, and G. He, Influence of Electropulsing on Nucleation During Phase Transformation, J. Mater. Res., 2002, 17(12), p 3012–3014CrossRef

Titel: Effect of Electropulsing on Microstructure and Properties of Severely Plastically Deformed Pure Copper Sheet
verfasst von: Jie Zhu
Shan Liu
Yao Lin
Guangchun Wang
Publikationsdatum: 10.02.2020
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2020
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-04642-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2020

Electrophoretic Deposition and Characterization of an Al/CuO Energetic Film with a Porous Hollow Microsphere Structure

Experimental Investigation on Friction-Stir-Assisted Incremental Forming with Synchronous Bonding of Aluminum Alloy and Steel Sheets

Microstructure, Densification and Mechanical Properties of Ti-22Al-25Nb Alloy Fabricated by Spark Plasma Sintering

Effect of Temperature on Corrosion Behavior of Low-Alloy Steel Exposed to a Simulated Marine Atmospheric Environment

Effect of Sodium Dodecyl Sulfate on Mechanical Properties and Electrical Conductivity of Nanotwinned Copper

Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction-Stir-Welded Al-Mg-Si Alloy

Premium Partner

Marktübersichten