Abstract
In order to present basic guidance for system calibration of split Hopkinson pressure bar (SHPB) with the special shape striker, wave characteristics and dynamic responses of SHPB under striker impact were analyzed. Stress generated by the special shape striker tends to have a half-sine waveform and has little wave dispersion during its propagation. Impact velocities of the special shape striker and peak values of generated stress still have linear relation but with a different coefficient from that of cylindrical strikers. From stress histories on the surfaces of the input bar impacted by the special shape striker off-axially and obliquely, it is found that the misalignment impacts usually trigger wave distortion and amplitude decrease, which can be used to identify the poor system adjustment. Finally, the system calibration of SHPB with the special shape striker can be classified into four steps: system adjustment, wave distortion identification, measurement calibration and transmission calibration, where the measurement calibration factor and transmission calibration factor are elaborated and redefined.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
LI Xi-bing, ZHOU Zi-long, HONG Liang, YIN Tu-bing. Large diameter SHPB tests with a special shaped striker [J]. ISRM News Journal, 2009, 12(1): 76–79.
LI Xi-bing, GU De-sheng. Rock impact dynamics [M]. Changsha: Central South University of Technology Press, 1994: 46–50. (in Chinese)
LOK T S, LI Xi-bing, LIU De-shun. Testing and response of large diameter brittle materials subjected to high strain rate [J]. Journal of Materials in Civil Engineering, 2002, 14(3): 262–269.
LI Xi-bing, ZHOU Zi-long, WANG Wei-hua. Construction of ideal striker for SHPB device based on FEM and neural network [J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(23): 4215–4219. (in Chinese)
LI Xi-bing, ZHOU Zi-long, LOK T S. Innovative testing technique of rock subjected to coupled static and dynamic loads [J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(5): 739–748.
ZHOU Zi-long, LI Xi-bing, YE Zhou-yuan. Obtaining constitutive relationship for rate-dependent rock in SHPB tests [J]. Rock Mechanics and Rock Engineering, 2010, 43(6): 697–706.
BAZLE A G, SERGEY L L, JOHN W G J. Hopkinson bar experimental technique: A critical review [J]. Appl Mech Rev, 2004, 57(4): 223–250.
ASM Int. High strain rate testing [M]// ASM handbook, Mechanical Testing and Evaluation. Materials Park, 2000: 939–1269.
LUNDBERG B, CARLSSON J, SUNDIN K G. Analysis of elastic waves in non-uniform rods from two-point strain measurement [J]. Journal of Sound and Vibration, 1990, 137(3): 483–493.
BACON C, BRUM A. Methodology for a Hopkinson test with a non-uniform viscoelastic bar [J]. International Journal of Impact Engineering, 2000, 24(3): 219–230.
LIFSHITZ J M, LEBER H. Data processing in the split Hopkinson pressure bar tests [J]. International Journal of Impacting Engineering, 1994, 15(6): 723–733.
LI J C, MA G W. Experimental study of stress wave propagation across a filled rock joint [J]. International Journal of Rock Mechanics and Mining Sciences, 2009, 46(3): 471–478.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Projects(50904079, 50934006) supported by the National Natural Science Foundation of China; Project(2010CB732004) supported by the National Basic Research Program of China
Rights and permissions
About this article
Cite this article
Zhou, Zl., Hong, L., Li, Qy. et al. Calibration of split Hopkinson pressure bar system with special shape striker. J. Cent. South Univ. Technol. 18, 1139–1143 (2011). https://doi.org/10.1007/s11771-011-0815-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-011-0815-2