Abstract
Equipment plays an important role in open pit mining industry and its cost competence at efficient operation and maintenance techniques centered on reliability can lead to significant cost reduction. The application of optimal maintenance process was investigated for minimizing the equipment breakdowns and downtimes in Sungun Copper Mine. It results in the improved efficiency and productivity of the equipment and lowered expenses as well as the increased profit margin. The field operating data of 10 trucks are used to estimate the failure and maintenance profile for each component, and modeling and simulation are accomplished by using reliability block diagram method. Trend analysis was then conducted to select proper probabilistic model for maintenance profile. Then reliability of the system was evaluated and importance of each component was computed by weighted importance measure method. This analysis led to identify the items with critical impact on availability of overall equipment in order to prioritize improvement decisions. Later, the availability of trucks was evaluated using Monte Carlo simulation and it is revealed that the uptime of the trucks is around 11000 h at 12000 operation hours. Finally, uncertainty analysis was performed to account for the uncertainty sources in data and models.
Similar content being viewed by others
References
TOPAL E, RAMAZAN S. A new MIP model for mine equipment scheduling by minimizing maintenance cost [J]. European Journal of Operational Research, 2010, 207: 1065–1071.
MODARRES M, KAMINSKIY M, KRIVTSOV V. Reliability engineering and risk analysis: A practical guide [M]. Boca Raton, USA: CRC, 1999.
NACHLAS J A, Reliability engineering [M]. New York: Taylor & Francis, 2005.
DODSON B, NOLAN D, Reliability engineering handbook [M]. Boca Raton, USA: CRC, 1999.
BARABADY J, KUMAR U. Reliability analysis of mining equipment: A case study of a crushing plant at Jajarm Bauxite Mine in Iran [J]. Reliability Engineering & System Safety, 2008, 93: 647–653.
VAGENAS N, KUMAR U, RÖNNKVIST E. Analysis of truck maintenance characteristics in a swedish open pit mine [J]. International Journal of Surface Mining and Reclamation, 1994, 8: 65–71.
KUMAR U, KLEFSJO B, GRANHOLM S. Reliability investigation for a fleet of load haul dump machines in a Swedish mine [J]. Reliability Engineering & System Safety, 1989, 26: 341–361.
UZGÖREN N, ELEVLI S, ELEVLI B, UYSAL Ö. Reliability analysis of draglines’ mechanical failures [J]. Science and Technology, 2010: 23–28.
HOSEINI S H, ATAIE M, KHALOOKAKAEI R, KUMAR U. Reliability modeling of hydraulic system of drum shearer machine [J]. Journal of Coal Science and Engineering (China), 2011, 17: 450–456.
KUMAR U, KLEFSJÖ B. Reliability analysis of hydraulic systems of LHD machines using the power law process model [J]. Reliability Engineering & System Safety, 1992, 35: 217–224.
MAJUMDAR S. Study on reliability modelling of a hydraulic excavator system [J]. Quality and Reliability Engineering International, 1995, 11: 49–63.
VAGENAS N, RUNCIMAN N, CLÉMENT S R. A methodology for maintenance analysis of mining equipment [J]. International Journal of Surface Mining, Reclamation and Environment, 1997, 11: 33–40.
SAMANTA B, SARKAR B, MUKHERJEE S. Reliability analysis of shovel machines used in an open cast coal mine [J]. Mineral Resources Engineering, 2001, 10: 219–231.
LHORENTE B, LUGTIGHEID D, KNIGHTS P F, Et Al. A model for optimal armature maintenance in electric haul truck wheel motors: A case study [J]. Reliability Engineering & System Safety, 2004, 84: 209–218.
KUMRAL M. An approach to reliability allocation problem in a mining system [C]// International Mining Congress and Fair. Turkey: 1MCET, 2005: 305–308.
BARABADY J. Improvement of system availability using reliability and maintainability analysis [D]. Sweden: Luleå University of Technology, 2005: 1–98.
GUPTA S, MAITI J, KUMAR R, KUMAR U. A control chart guided maintenance policy selection [J]. International Journal of Mining, Reclamation and Environment, 2009, 23: 216–226.
LOUIT D M, PASCUAL R, JARDINE A K S. A practical procedure for the selection of time-to-failure models based on the assessment of trends in maintenance data [J]. Reliability Engineering & System Safety, 2009, 94: 1618–1628.
VAYENAS N, WU X. Maintenance and reliability analysis of a fleet of load-haul-dump vehicles in an underground hard rock mine [J]. International Journal of Mining, Reclamation and Environment, 2009, 23: 227–238.
HOSEINIE S H, ATAIE M, KHALOOKAKAEI R, KUMAR U. Reliability and maintainability analysis of electrical system of drum shearers [J]. Journal of Coal Science and Engineering (China), 2011, 17: 192–197.
ANSELL J, PHILLIPS M. Practical problems in the statistical analysis of reliability data [J]. Applied Statistics, 1989: 205–247.
KECECIOGLU D. Reliability engineering handbook [M]. New Jersey: Prentice Hall, 1991: 215–587.
MARTZ H, WALLER R. Bayesian reliability analysis [M]. New York: John Wiley & Sons, 1982: 111–118.
BARLOW R E, CAMPO R A. Total time on test processes and applications to failure data analysis [M]. Philaddphia: Defense Tedcnical Infonmation Center, 1975: 1–61.
ASCHER H, FEINGOLD H. Repairable systems reliability: Modelling, inference, misconceptions and their causes [R]. Lecture Notes in Stats. Marcel Dekker, Inc: NY. 1984:.
VIERTÄVÄ J, VAURIO J K. Testing statistical significance of trends in learning, ageing and safety indicators [J]. Reliability Engineering & System Safety, 2009, 94: 1128–1132.
MANN H B. Nonparametric tests against trend [J]. Econometrica: Journal of the Econometric Society, 1945: 245–259.
KVALOY J T, LINDQVIST B. An area based test for trend in repairable systems data [EB/OL]. [2013-09-02]. http://www.math.ntnu.no/preprint/statistics. 1996.
MODARRES M. Risk analysis in engineering: Techniques, tools, and trends [R]: CRC, 2006.
GROEN F J, MOSLEH A. Foundations of probabilistic inference with uncertain evidence [J]. International Journal of Approximate Reasoning, 2005, 39: 49–83.
POURGOL-MOHAMMAD M. Thermal-hydraulics system codes uncertainty assessment: A review of the methodologies [J]. Annals of Nuclear Energy, 2009, 36: 1774–1786.
STAMATELATOS M. Probabilistic risk assessment procedures guide for NASA managers and practitioners [R]. Washinston D.C.: NASA Office of Safety and Mission Assurance. 2002: 171–173.
MONIRI MORAD A. Maintenance management information system for mining equipment in Sungun Copper Mine [D]. Tabriz: Sahand University of Technology, 2012.
NELSON W B. Recurrent events data analysis for product repairs, disease recurrences, and other applications [J]. ASA/SIAM. 2003: 1–77.
METTAS A, ZHAO W. Modeling and analysis of repairable systems with general repair [C]// Reliability and Maintainability Symposium. Virginia, USA: IEEE, 2005, 176–182.
LIPOW M, LLOYD D K. Reliability: Management, methods, and mathematics [M]. New Jersey: Prentice Hall, Englewood Cliffs, 1962: 330–373.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Morad, A.M., Pourgol-Mohammad, M. & Sattarvand, J. Application of reliability-centered maintenance for productivity improvement of open pit mining equipment: Case study of Sungun Copper Mine. J. Cent. South Univ. 21, 2372–2382 (2014). https://doi.org/10.1007/s11771-014-2190-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-014-2190-2