Skip to main content
Log in

In situ synthesis of FeS/Carbon fibers for the effective removal of Cr(VI) in aqueous solution

  • Research Article
  • Published:
Frontiers of Environmental Science & Engineering Aims and scope Submit manuscript

Abstract

Iron sulfide (FeS) nanoparticles (termed FSNs) have attracted much attention for the removal of pollutants due to their high efficiency and low cost, and because they are environmentally friendly. However, issues of agglomeration, transformation, and the loss of active components limit their application. Therefore, this study investigates in situ synthesized FeS/carbon fibers with an Fecarrageenan biomass as a precursor and nontoxic sulfur source to ascertain the removal efficiency of the fibers. The enrichment of sulfate groups as well as the double-helix structure in ι-carrageenan-Fe could effectively avoid the aggregation and loss of FSNs in practical applications. The obtained FeS/ carbon fibers were used to control a Cr(VI) polluted solution, and exhibited a relatively high removal capacity (81.62 mg/g). The main mechanisms included the reduction of FeS, electrostatic adsorption of carbon fibers, and Cr(III)-Fe(III) complexation reaction. The pseudo-second-order kinetic model and Langmuir adsorption model both provided a good fit of the reaction process; hence, the removal process was mainly controlled by chemical adsorption, specifically monolayer adsorption on a uniform surface. Furthermore, co-existing anions, column, and regeneration experiments indicated that the FeS/ carbon fibers are a promising remediation material for practical application.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Ai Z, Cheng Y, Zhang L, Qiu J (2008). Efficient removal of Cr(VI) from aqueous solution with Fe@Fe2O3 core-shell nanowires. Environmental Science & Technology, 42(18): 6955–6960

    Article  CAS  Google Scholar 

  • Alghamdi M M, El-Zahhar A A, Idris A M, Said T O, Sahlabji T, El Nemr A (2019). Synthesis, characterization, and application of a novel polymeric-bentonite-magnetite composite resin for water softening. Separation and Purification Technology, 224: 356–365

    Article  CAS  Google Scholar 

  • Argüelles A, Barbés F, Espeso J I, Garcia-Mateo C (2019). Cryogenic study of the magnetic and thermal stability of retained austenite in nanostructured bainite. Science and Technology of Advanced Materials, 20(1): 673–687

    Article  Google Scholar 

  • Barrera-Diaz C E, Lugo-Lugo V, Bilyeu B (2012). A review of chemical, electrochemical and biological methods for aqueous Cr(VI) reduction. Journal of Hazardous Materials, 1-12: 223–224

    Google Scholar 

  • Bhaumik M, Maity A, Srinivasu V V, Onyango M S (2012). Removal of hexavalent chromium from aqueous solution using polypyrrolepolyaniline nanofibers. Chemical Engineering Journal, 181-182: 323–333

    Article  CAS  Google Scholar 

  • Cao Y H, Huang J N, Li Y H, Qiu S, Liu J R, Khasanov A, Khan M A, Young D P, Peng F, Cao D P, Peng X F, Hong K L, Guo Z H (2016). One-pot melamine derived nitrogen doped magnetic carbon nanoadsorbents with enhanced chromium removal. Carbon, 109: 640–649

    Article  CAS  Google Scholar 

  • Chen T, Luo L, Deng S, Shi G, Zhang S, Zhang Y, Deng O, Wang L, Zhang J, Wei L (2018). Sorption of tetracycline on H3PO4 modified biochar derived from rice straw and swine manure. Bioresource Technology, 267: 431–437

    Article  CAS  Google Scholar 

  • Du J, Bao J, Lu C, Werner D (2016). Reductive sequestration of chromate by hierarchical FeS@Fe0 particles. Water Research, 102: 73–81

    Article  CAS  Google Scholar 

  • Du WY, Zhang Q Z, Shang Y N, Wang W, Li Q, Yue Q Y, Gao B Y, Xu X (2020). Sulfate saturated biosorbent-derived Co-S@NC nanoarchitecture as an efficient catalyst for peroxymonosulfate activation. Applied Catalysis B: Environmental, 262: 118302

    Article  CAS  Google Scholar 

  • Duan P, Ma T, Yue Y, Li Y, Zhang X, Shang Y, Gao B, Zhang Q, Yue Q, Xu X (2019). Fe/Mn nanoparticles encapsulated in nitrogen-doped carbon nanotubes as a peroxymonosulfate activator for acetamiprid degradation. Environmental Science. Nano, 6(6): 1799–1811

    CAS  Google Scholar 

  • Duan P, Qi Y, Feng S, Peng X, Wang W, Yue Y, Shang Y, Li Y, Gao B, Xu X (2020). Enhanced degradation of clothianidin in peroxymonosulfate/ catalyst system via core-shell FeMn@N-C and phosphate surrounding. Applied Catalysis B: Environmental, 267: 118717

    Article  CAS  Google Scholar 

  • Fei L, Lin Q, Yuan B, Chen G, Xie P, Li Y, Xu Y, Deng S, Smirnov S, Luo H (2013). Reduced graphene oxide wrapped FeS nanocomposite for lithium-ion battery anode with improved performance. ACS Applied Materials & Interfaces, 5(11): 5330–5335

    Article  CAS  Google Scholar 

  • Foo K Y, Hameed B H (2010). Insights into the modeling of adsorption isotherm systems. Chemical Engineering Journal, 156(1): 2–10

    Article  CAS  Google Scholar 

  • Gheju M, Balcu I, Mosoarca G (2016). Removal of Cr(VI) from aqueous solutions by adsorption on MnO2. Journal of Hazardous Materials, 310: 270–277

    Article  CAS  Google Scholar 

  • Gong Y, Gai L, Tang J, Fu J, Wang Q, Zeng E Y (2017). Reduction of Cr (VI) in simulated groundwater by FeS-coated iron magnetic nanoparticles. The Science of the total environment, 595: 743–751

    Article  CAS  Google Scholar 

  • Han Y, Yan W (2016). Reductive dechlorination of trichloroethene by zero-valent iron nanoparticles: Reactivity enhancement through sulfidation treatment. Environmental Science & Technology, 50 (23): 12992–13001

    Article  CAS  Google Scholar 

  • He X, Qiu X H, Chen J Y (2017). Preparation of Fe(II)-Al layered double hydroxides: Application to the adsorption/reduction of chromium. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 516: 362–374

    Article  CAS  Google Scholar 

  • Ho Y S (2006). Review of second-order models for adsorption systems. Journal of Hazardous Materials, 136(3): 681–689

    Article  CAS  Google Scholar 

  • Hu J, Chen G, Lo I M C (2005). Removal and recovery of Cr(VI) from wastewater by maghemite nanoparticles. Water Research, 39(18): 4528–4536

    Article  CAS  Google Scholar 

  • Huang S H, Chen D H (2009). Rapid removal of heavy metal cations and anions from aqueous solutions by an amino-functionalized magnetic nano-adsorbent. Journal of Hazardous Materials, 163(1): 174–179

    Article  CAS  Google Scholar 

  • Kim E J, Kim J H, Azad A M, Chang Y S (2011). Facile synthesis and characterization of Fe/FeS nanoparticles for environmental applications. ACS Applied Materials & Interfaces, 3(5): 1457–1462

    Article  CAS  Google Scholar 

  • Kim E J, Kim J H, Chang Y S, Turcio-Ortega D, Tratnyek P G (2014). Effects of metal ions on the reactivity and corrosion electrochemistry of Fe/FeS nanoparticles. Environmental Science & Technology, 48 (7): 4002–4011

    Article  CAS  Google Scholar 

  • Li D, Sun Y, Chen S, Yao J, Zhang Y, Xia Y, Yang D (2018). Highly porous FeS/Carbon fibers derived from Fe-carrageenan biomass: High-capacity and durable anodes for sodiumion batteries. ACS Applied Materials & Interfaces, 10(20): 17175–17182

    Article  CAS  Google Scholar 

  • Liang H, Song B, Peng P, Jiao G J, Yan X, She D (2019). Preparation of three-dimensional honeycomb carbon materials and their adsorption of Cr(VI). Chemical Engineering Journal, 367: 9–16

    Article  CAS  Google Scholar 

  • Liu J F, Zhao Z S, Jiang G B (2008). Coating Fe3O4 magnetic nanoparticles with humic acid for high efficient removal of heavy metals in water. Environmental Science & Technology, 42(18): 6949–6954

    Article  CAS  Google Scholar 

  • Lyu H H, Tang J C, Huang Y, Gai L S, Zeng E Y, Liber K, Gong Y Y (2017). Removal of hexavalent chromium from aqueous solutions by a novel biochar supported nanoscale iron sulfide composite. Chemical Engineering Journal, 322: 516–524

    Article  CAS  Google Scholar 

  • Mohan D, Pittman C U Jr (2006). Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from water. Journal of Hazardous Materials, 137(2): 762–811

    Article  CAS  Google Scholar 

  • Raven K P, Jain A, Loeppert R H (1998). Arsenite and arsenate adsorption on ferrihydrite: Kinetics, equilibrium, and adsorption envelopes. Environmental Science & Technology, 32(3): 344–349

    Article  CAS  Google Scholar 

  • Sankararamakrishnan N, Shankhwar A, Chauhan D (2019). Mechanistic insights on immobilization and decontamination of hexavalent chromium onto nano MgS/FeS doped cellulose nanofibres. Chemosphere, 228: 390–397

    Article  CAS  Google Scholar 

  • Scheinost A C, Charlet L (2008). Selenite reduction by mackinawite, magnetite and siderite: XAS characterization of nanosized redox products. Environmental Science & Technology, 42(6): 1984–1989

    Article  CAS  Google Scholar 

  • Wu J, Wang X B, Zeng R J (2017). Reactivity enhancement of iron sulfide nanoparticles stabilized by sodium alginate: Taking Cr(VI) removal as an example. Journal of Hazardous Materials, 333: 275–284

    Article  CAS  Google Scholar 

  • Wu J, Zeng R J (2018). In situ preparation of stabilized iron sulfide nanoparticle-impregnated alginate composite for selenite remediation. Environmental Science & Technology, 52(11): 6487–6496

    Article  CAS  Google Scholar 

  • Xu Y, Chen J, Chen R, Yu P, Guo S, Wang X (2019). Adsorption and reduction of chromium(VI) from aqueous solution using polypyrrole/ calcium rectorite composite adsorbent. Water Research, 160: 148–157

    Article  CAS  Google Scholar 

  • Yang R, Wang Y, Li M, Hong Y J (2014). A new carbon/ferrous sulfide/iron composite prepares by an in situ carbonization reduction method from hemp (Cannabis sativa L.) stems and its Cr(VI) removal ability. ACS Sustainable Chemistry & Engineering, 2(5): 1270–1279

    Article  CAS  Google Scholar 

  • Zhou S, Li Y, Chen J, Liu Z, Wang Z, Na P (2014). Enhanced Cr(VI) removal from aqueous solutions using Ni/Fe bimetallic nanoparticles: Characterization, kinetics and mechanism. RSC Advances, 4 (92): 50699–50707

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This research was funded by the National Natural Science Foundation of China (Grant Nos. 51672143 and 51808303), Natural Science Foundation of Shandong Province (Nos. ZR2019BEE027 and ZR2018BEM002), Applied Basic Research of Qingdao City (Special Youth Project) (Nos. 19-6-2-74-cg and 19-6-2-83-cg), Outstanding Youth of Natural Science in Shandong Province (No. JQ201713), and Taishan Scholars Program.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Yuqian Cui or Yuanyuan Sun.

Additional information

Highlights

• FeS/carbon fibers were in situ synthesized with Fe-carrageenan hydrogel fiber.

• The double helix structure of carrageenan is used to load and disperse Fe.

• Pyrolyzing sulfate groups enriched carrageenan-Fe could easily generate FeS.

• The adsorption mechanisms include reduction and complexation reaction.

Electronic supplementary material

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, R., Li, D., Sun, J. et al. In situ synthesis of FeS/Carbon fibers for the effective removal of Cr(VI) in aqueous solution. Front. Environ. Sci. Eng. 14, 68 (2020). https://doi.org/10.1007/s11783-020-1247-8

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s11783-020-1247-8

Keywords

Navigation