Abstract
Titanium alloys are extensively used in a variety of applications because of their good mechanical properties, high biocompatibility, and corrosion resistance. Recently, β-type Ti alloys containing Ta and Nb have received much attention because they feature not only high specific strength but also biocorrosion resistance, no allergic problems, and biocompatibility. A Ti-25Ta-25Nb β-type titanium alloy was subjected to severe plastic deformation (SPD) processing by accumulative roll bonding and investigated with the aim to observe the texture developed during SPD processing. Texture data expressed by pole figures, inverse pole figures, and orientation distribution functions for the (110), (200), and (211) β-Ti peaks were obtained by XRD investigations. The results showed that it is possible to obtain high-intensity share texture modes ({001}〈110〉) and well-developed α and γ-fibers; the most important fiber is the α-fiber ({001}\( \left\langle {1\bar{1}0} \right\rangle \) to {114}\( \left\langle {1\bar{1}0} \right\rangle \) to {112}\( \left\langle {1\bar{1}0} \right\rangle \)). High-intensity texture along certain crystallographic directions represents a way to obtain materials with high anisotropic properties.
Similar content being viewed by others
References
T.G. Nieh and J. Wadsworth, Scripta Metall. Mater. 25, 955 (1991).
P.G. Sanders, J.A. Eastman, and J.R. Weertman, Acta Mater. 45, 4019 (1997).
N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino, Scripta Mater. 47, 893 (2002).
Z. Horita, M. Furukawa, N. Nemoto, A.J. Barnes, and T.G. Langdon, Acta Mater. 48, 3633 (2000).
V.M. Segal, Mater. Sci. Eng. A 338, 331 (2002).
R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, and Y.T. Zhu, JOM 58, 33 (2006).
R.Z. Valiev and T.G. Langdon, Prog. Mater Sci. 51, 881 (2006).
Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R.G. Hong, Scripta Mater. 39, 1221 (1998).
R.Z. Valiev, N.A. Krasilnikov, and N.K. Tsenev, Mater. Sci. Eng. A 197, 35 (1991).
R.Z. Valiev, Mater. Sci. Eng. A 234–236, 59 (1997).
J.Y. Huang, Y.T. Zhu, H. Jiang, and T.C. Lowe, Acta Mater. 49, 1497 (2001).
S. Mizunuma, Mater. Sci. Forum 503–504, 185 (2005).
K. Nakamura, K. Neishi, K. Kaneko, M. Nakagaki, and Z. Horita, Mater. Trans. 45, 3338 (2004).
G. Krallics and J.G. Lenard, J. Mater. Proc. Technol. 152, 154 (2004).
N. Kamikawa, T. Sakai, and N. Tsuji, Acta Mater. 55, 5873 (2007).
A. Azushima, R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, and A. Yanagida, CIRP Ann. Manufact. Technol. 57, 716 (2008).
M. Holscher, D. Raabe, and K. Lucke, Acta Metall. Mater. 42, 879 (1994).
D. Raabe and K. Lucke, Mater. Sci. Technol. 9, 302 (1993).
B. Sander and D. Raabe, Mat. Sci. Eng. A 479, 236 (2008).
R. Mythili, V. Thomas Paul, S. Saroja, M. Vijayalakshmi, and V.S. Raghunathan, Mater. Sci. Eng. A 390, 299 (2005).
C.J. Boehlert, Mater. Sci. Eng. A 267, 82 (1999).
K. Wang, Mater. Sci. Eng. A 213, 134 (1996).
M. Niinomi, Sci. Technol. Adv. Mater. 4, 445 (2003).
Y. Song, R. Yang, and Z.X. Guo, Mater. Trans. 43, 3028 (2002).
E. Takahashi, T. Sakurai, S. Watanabe, N. Masahashi, and S. Hanada, Mater. Trans. 43, 2978 (2002).
G. Yang and T. Zhang, J. Alloys Compd. 392, 291 (2005).
M. Niinomi, Mater. Sci. Eng. A 243, 231 (1998).
M. Long and H.J. Rack, Biomaterials 19, 1621 (1998).
I. Lonardelli, N. Gey, H.R. Wenk, M. Humbert, S.C. Vogel, and L. Lutterotti, Acta Mater. 55, 5718 (2007).
M.L. Weaver and H. Garmestani, Mater. Sci. Eng. A 247, 229 (1998).
M.R. Bache and W.J. Evans, Mater. Sci. Eng. A 319, 409 (2001).
A.N. Kalinyuk, N.P. Trigub, V.N. Zamkov, O.M. Ivasishin, P.E. Markovsky, R.V. Teliovich, and S.L. Semiatin, Mater. Sci. Eng. A 346, 178 (2003).
S. Zaefferer, Mater. Sci. Eng. A 344, 20 (2003).
S.L. Semiatin, P.N. Fagin, M.G. Glavicic, I.M. Sukonnik, and O.M. Ivasishin, Mater. Sci. Eng. A 299, 225 (2001).
D. Raducanu, V.D. Cojocaru, I. Cinca, and I. Sichin, J. Optoelectron. Adv. Mater. 9, 3346 (2007).
L. Zeng and T.R. Bieler, Mater. Sci. Eng. A 392, 403 (2005).
F. Bachmann, R. Hielscher, and H. Schaeben, Solid State Phenom. 160, 63 (2010).
F. Bachmann, R. Hielscher, P.E. Jupp, W. Pantleon, H. Schaeben, and E. Wegert, J. Appl. Crystallogr. 43, 1338 (2010).
J. He, F. Zhou, G. Chang, and E.J. Lavernia, J. Mater. Sci. 36, 2955 (2001).
E. Bertrand, P. Castany, I. Peron, and T. Gloriant, Scripta Mater. 64, 1110 (2011).
H.Y. Kim, T. Sasaki, K. Okutsu, J.I. Kim, T. Inamura, H. Hosada, and S. Myazaki, Acta Mater. 24, 423 (2006).
N.P. Gurao and S. Suwas, Mater. Sci. Eng. A 504, 24 (2009).
Z. Ahmed and A. Ul Haq, J. Magn. Magn. Mater. 321, 325 (2009).
C. Chen, M.P. Wang, S. Wang, Y.L. Jia, R.S. Lei, F.X. Zia, B. Huo, and H.C. Yu, J. Alloys Compd. 513, 208 (2012).
O. Engler, M.Y. Huh, and C.N. Tome, Metall. Mater. Trans. A 31, 2299 (2000).
G. Liu and B.J. Duggan, Metall. Mater. Trans. A 32, 125 (2001).
T. Karthikeyan, A. Dasgupta, R. Khatirkar, S. Saroja, I. Samajdar, and M. Vijayalakshmi, Mater. Sci. Eng. A 528, 549 (2010).
S. Banumathy, R.K. Mandal, and A.K. Singh, J. Alloys Compd. 500, L26 (2010).
Y.B. Park, D.N. Lee, and G. Gottstein, Acta Mater. 46, 3371 (1998).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cojocaru, VD., Raducanu, D., Gloriant, T. et al. Texture Evolution in a Ti-Ta-Nb Alloy Processed by Severe Plastic Deformation. JOM 64, 572–581 (2012). https://doi.org/10.1007/s11837-012-0312-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-012-0312-6