Skip to main content
Log in

Synchronous Volatilization of Sn, Zn, and As, and Preparation of Direct Reduction Iron (DRI) from a Complex Iron Concentrate via CO Reduction

  • Published:
JOM Aims and scope Submit manuscript

Abstract

Sn-, Zn-, and As-bearing iron ores are typical complex ores and are abundantly reserved in China. This kind of ore is difficult to use effectively due to the complicated relationships between iron and the other valuable metal minerals. Excessive Sn, Zn, and As contents would adversely affect ferrous metallurgy operation as well as the quality of the products. In this study, thermodynamic calculations revealed that it was feasible to synchronously volatilize Sn, Zn, and As via CO reduction. Experimental results showed that preoxidation was necessary for the subsequent reductive volatilization of Zn from the pellets, and the proper preoxidation temperature was 700–725°C under air atmosphere. Synchronous volatilization of Sn, Zn, and As was realized by roasting under weak reductive atmosphere after the pellets were preoxidized. The volatilization ratios of 75.88% Sn, 78.88% Zn, and 84.43% As were obtained, respectively, under the conditions by reduction at 1000°C for 100 min with mixed gas of 50% CO + 50% CO2 (in vol.). A metallic pellet (direct reduction iron) with total iron grade of 87.36%, Fe metallization ratio of 89.27%, and residual Sn, Zn, and As contents of 0.071%, 0.009%, and 0.047%, respectively, was prepared. Sn and As were mainly volatilized during weak reductive atmosphere roasting, and those volatilized in the metallization reduction process were negligible. Most of Zn (78.88%) was volatilized during weak reductive atmosphere roasting, while the metallization reduction process only contributed to 16.10% of total Zn volatilization.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. J. Zou, Miner. Eng. 2, 1 (2003).

    Google Scholar 

  2. Y.B. Zhang, L.Y. Chen, G.H. Li, T. Jiang, and Z.C. Huang, J. Cent. South Univ. Sci. Technol. 42, 1501 (2010).

    Google Scholar 

  3. T. Jiang, Y.B. Zhang, G.Q. He, G.H. Li, and Z.C. Huang (Paper presented at the Proceedings of 24th IMPC, Beijing, 2008), pp. 3952–3958.

  4. C.D. Xu, R. Lin, and D.C. Wang, Physical and Chemical of Zinc Metallurgy (Shanghai: Science and Technology Press, 1979), pp. 829–836.

    Google Scholar 

  5. Y.B. Zhang, Y.F. Guo, G.H. Li, Y.B. Yang, Y.S. Jin, Z.C. Huang, X.H. Fan, and T. Jiang, Proceedings of Sessions and Symposia Sponsored by the Extraction and Processing Division (Warrendale, PA: TMS, 2005), pp. 417–426.

  6. L. Lin and S.Q. Wang, Process. Metall. 7, 26 (1998).

    Google Scholar 

  7. A.W. Fletcher, D.V. Jackson, and A.G. Valentine, Trans. Nonferr. Met. Soc. 76, 145 (1967).

    Google Scholar 

  8. T. Jiang, Y.B. Zhang, Z.C. Huang, G.H. Li, Y.F. Guo, Y.B. Yang, and Y.S. Jin, Trans. Nonferr. Met. Soc. 15, 902 (2005).

    Google Scholar 

  9. Q. Lu, S.H. Zhang, and X. Hu, Adv. Mater. Res. 284, 238 (2011).

    Article  Google Scholar 

  10. S. Cetinkaya and S. Eroglu, Int. J. Miner. Process. 110, 71 (2012).

    Article  Google Scholar 

  11. Y.B. Zhang, T. Jiang, G.H. Li, Z.C. Huang, and Y.F. Guo, Ironmak. Steelmak. 38, 612 (2011).

    Google Scholar 

  12. D. Huang, Y.B. Zhang, G.H. Han, G.H. Li, and T. Jiang, Supplemental Proceedings: Materials Processing and Properties (Warrendale, PA: TMS, 2010), Vol. 1, pp. 393–401.

  13. Y.B. Zhang, G.H. Li, T. Jiang, Y.F. Guo, and Z.C. Huang, Int. J. Miner. Process. 114, 109 (2012).

    Article  Google Scholar 

  14. L. Bentell, L. Norrman, and M. Sundgren, Scand. J. Metall. 13, 308 (1984).

    Google Scholar 

  15. S.H. Zhang, Q. Lu, and X. Hu, Chin. J. Nonferr. Met. 21, 1075 (2011).

    Google Scholar 

  16. N. Chakraborti and D.C. Lynch, Metall. Mater. Trans. B 14, 239 (1983).

    Article  Google Scholar 

  17. J. Joffre, Foreign Tin Ind. 4, 38 (1984).

    Google Scholar 

  18. H. Giefers, F. Porsch, and G. Wortmann, Solid State Ion. 176, 199 (2005).

    Article  Google Scholar 

  19. M.S. Moreno, G. Punte, G. Rigotti, R.C. Mercader, A.D. Weisz, and M.A. Blesa, Solid State Ion. 144, 81 (2001).

    Article  Google Scholar 

  20. D.L. Ye, Practical Thermodynamics Data Handbook of Inorganic Substances (Beijing: Metallurgy Industry Press, 2002), pp. 875–878.

    Google Scholar 

Download references

Acknowledgement

The authors wish to express their thanks to the National Science Fund for Distinguished Young Scholars (No. 50725416) and the Program for New Century Excellent Talents in University (NCET-11-0515) for financial support of this research.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Yuanbo Zhang or Tao Jiang.

Additional information

Yuanbo Zhang and Tao Jiang have contributed equally to this study.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Li, G., You, Z., Zhang, Y. et al. Synchronous Volatilization of Sn, Zn, and As, and Preparation of Direct Reduction Iron (DRI) from a Complex Iron Concentrate via CO Reduction. JOM 66, 1701–1710 (2014). https://doi.org/10.1007/s11837-013-0852-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11837-013-0852-4

Keywords

Navigation