Abstract
Increasing the efficiency of natural gas reciprocating engines will require materials with better mechanical and corrosion resistance at high temperatures. One solution to increase the lifetime of exhaust valves is to apply an aluminide coating to prevent corrosion assisted fatigue cracking, but the impact of the coating on the valve material mechanical properties needs to be assessed. In addition to cyclic oxidation testing in dry and humid air at 800°C, creep and high cycle fatigue (HCF) testing were conducted at 816°C on bare and slurry or pack-coated 31V alloy. The coated and bare creep specimens exhibited very similar creep rupture lives, as long as the specimens were annealed according to the 31V standard heat treatment before testing. The HCF behavior of the pack-coated alloy was close to the behavior of the bare alloy, but fatigue lifetimes of slurry-coated 31V specimens had higher variability. Aluminide coatings have the potential to improve the valve performance at high temperature, but the coating deposition process needs to be tailored for the substrate standard heat treatment.
Similar content being viewed by others
References
L. Goldstein, B. Hedman, D. Knowles, S.I. Freedman, R. Woods, T. Schweizer, NREL/TP-620-34783 (2003).
P. Maziasz, unpublished research (2014).
J.T. DeMasi-Marcin and D.K. Gupta, Surf. Coat. Tech. 68–69, 1 (1994).
G.W. Goward, Mater. Sci. Tech. 2, 194 (1986).
B.A. Pint, Surf. Coat. Technol. 188–189, 71 (2004).
J.R. Nicholls, JOM 52, 28 (2000).
N.R. Lindblad, Oxid. Met. 1, 143 (1969).
B.A. Pint, P. Maziasz, NACE Paper 08-443 (Presented at NACE Corrosion 2008, New Orleans, LA, March 2008).
M. Eskner and R. Sandstrom, Surf. Coat. Technol. 165, 71 (2003).
Md. Zafir Alam, D. Chatterjee, S.V. Kamat, V. Jayaram, D.K. Das, Mater. Sci. Eng. A, 527, 7147–7150 (2010).
H. Bernard and L. Remy, High Temperature Materials for Power Engineering 1990, ed. E. Bachelet, R. Brunetaud, D. Coutsouradis (Dordrecht, The Netherlands: Kluwer Academic Publishers, 1990), pp. 1185–1194.
A.K. Hall, Synthesis of Aluminum-Rich Coatings on New High-Temperature Cast Austenitic Steel CF8C-Plus by a Pack Cementation Process (M.S. thesis, Tennessee Technological University, 2011).
S. Dryepondt and B. Pint, Surf. Coat. Technol. 205, 1195 (2010).
S. Dryepondt, Y. Zhang, and B.A. Pint, Surf. Coat. Technol. 66, 3880 (2006).
S. Dryepondt, Y. Zhang, and B.A. Pint, NACE Paper 07-471 (Presented at NACE Corrosion 2007, Nashville, TN, March 2007).
S. Dryepondt, B. Pint, and Y. Zhang, NACE Paper 2012-1668 (Presented at NACE Corrosion 2012, Salt Lake City, UT, March 2012).
T.C. Totemeier, W.F. Gale, and J.E. King, Mater. Sci. Eng. A 169, 19 (1993).
N.D. Evans, P.J. Maziasz and J.J. Truhan, Solid-to-Solid Phase Transformations in Inorganic Materials, eds. J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa (Warrendale, PA: TMS, 2005), pp. 809–816.
B.L. Bates, Y. Zhang, S. Dryepondt, and B. Pint, Surf. Coat. Technol. 240, 32 (2014).
T.C. Totemeier and J.E. King, Metall. Mater. Trans. A 27A, 353 (1996).
Svjetlana Stekovic (Ph.D. Thesis No. 1129, Linkoping University, 2007).
J.M. Veys and R. Mevrel, Mater. Sci. Eng. 88, 253 (1987).
H.W. Grunling, K. Scheineider, and L. Singheiser, Mater. Sci. Eng. 88, 177 (1987).
Acknowledgements
The authors wish to thank Kevin Hantak at TWR Engine Components for providing the 31V creep and fatigue specimens. They also acknowledge G. Garner, J. Moser, T.L. Jordan, D. McClurg, C.S. Hawkins, D.L. Erdman III, D. Leonard and B.L. Bates for assistance with the experimental work, as well as A. Shyam and D.F. Wilson for reviewing the manuscript. This research was sponsored by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dryepondt, S., Jones, S.J., Zhang, Y. et al. Oxidation, Creep and Fatigue Properties of Bare and Coated 31V Alloy. JOM 67, 68–76 (2015). https://doi.org/10.1007/s11837-014-1240-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-014-1240-4