UV-waterborne polyurethane-acrylate nanocomposite coatings containing alumina and silica nanoparticles for wood: mechanical, optical, and thermal properties assessment

The effect of alumina and silica nanoparticles on mechanical, optical, and thermal properties of UV-waterborne nanocomposite coatings was investigated. The addition of nanoalumina and nanosilica was shown to decrease the hardness because of nanoparticle aggregation. In comparison to the neat coating and despite the presence of aggregates, the scratch resistance of nanocomposite coatings was significantly improved. As expected, the gloss of UV-waterborne coatings was reduced following the addition of nanoparticles due to an increase of the surface roughness. Alumina and silica nanoparticles were found to enhance the glass transition temperature of PUA nanocomposite coatings by hindering the mobility of macromolecular chains at the interface around the nanoparticles. Finally, the interest and efficiency of grafting trialkoxysilanes was demonstrated with the study of nanosilica behavior. Not only was the dispersion of nanosilica enhanced following trialkoxysilanes grafting onto silica nanoparticles, but also the scratch resistance and the adhesion of UV-waterborne coatings containing nanosilica markedly increased even with 1 wt% content. Silica which is recommended in the wooden furniture and kitchen cabinet manufacturing industry as nano-reinforcement provides improved properties well suited in surface coating applications to efficiently protect surface of wood substrates.