Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Journal of Coatings Technology and Research
Erschienen in: Journal of Coatings Technology and Research 3/2015

01.05.2015 | Review

Effects of biofouling development on drag forces of hull coatings for ocean-going ships: a review

Erschienen in: Journal of Coatings Technology and Research | Ausgabe 3/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This review presents a systematic overview of the literature and describes the experimental methods used to quantify the drag of hull coatings. It also summarizes the findings of hull coating’s drag performance and identifies the main parameters impacting it. The advantages and disadvantages of the reported methods listed in this review provide an assessment of the most efficient methods to quantify the drag performance of hull coatings. This review determines that drag performance of hull coating technology varies depending on whether the coating condition is newly applied, after dynamic or static seawater exposure. The summarized data reveal that, while several methods have attempted to quantify drag performance of hull coatings, other methods must be explored in order to accurately measure the long-term drag performance of hull coatings in conditions mimicking those that ship hulls encounter during actual voyages.
Nächster Artikel Use of nanofillers in wood coatings: a scientific review

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
2.
Yebra, DM, Kiil, S, Dam-Johansen, K, “Antifouling Technology-Past, Present and Future Steps Towards Efficient and Environmentally Friendly Antifouling Coatings.” Prog. Org. Coat., 50 75–104 (2004)CrossRef
3.
4.
Townsin, R, “The Ship Hull Fouling Penalty.” Biofouling, 19 9–15 (2003)CrossRef
5.
Lejars, M, Margaillan, A, Bressy, C, “Fouling Release Coatings: A Nontoxic Alternative To Biocidal Antifouling Coatings.” Chem. Rev., 112 4347–4390 (2012)CrossRef
6.
Hellio, C, Yebra, D, Advances in Marine Antifouling Coatings And Technologies. Woodhead Publishing, Cambridge, 2009CrossRef
7.
Barrett, M, “HMS Illustrious—Effects of No Anti-fouling.” Naval Architect., E128–E129 (1985)
8.
Almeida, E, Diamantino, TC, de Sousa, O, “Marine Paints: The Particular Case of Antifouling Paints.” Prog. Org. Coat., 59 2–20 (2007)CrossRef
9.
Kiil, S, Weinell, CE, Pedersen, MS, Dam-Johansen, K, “Analysis of Self-polishing Antifouling Paints Using Rotary Experiments and Mathematical Modelling.” Ind. Eng. Chem. Res., 40 3906–3920 (2001)CrossRef
10.
Kiil, S, Dam-Johansen, K, Weinell, CE, Pedersen, MS, Codolar, SA, “Dynamic Simulations of a Self-polishing Antifouling Paint Exposed to Seawater.” J. Coat. Technol., 74 45–54 (2002)CrossRef
11.
Chambers, LD, Stokes, KR, Walsh, FC, Wood, RJ, “Modern Approaches to Marine Antifouling Coatings.” Surf. Coat. Technol., 201 3642–3652 (2006)CrossRef
12.
Thomas, J, Choi, S, Fjeldheim, R, Boudjouk, P, “Silicones Containing Pendant Biocides for Antifouling Coatings.” Biofouling, 20 227–236 (2004)CrossRef
13.
14.
Monfared, H, Sharif, F, “Design Guidelines for Development of Tin-Free Antifouling Self-polishing Coatings Using Simulation.” Prog. Org. coat., 63 79–86 (2008)CrossRef
15.
Olsen, SM, Yebra, DM, “On the Use of the Term ‘Self-polishing’ for Antifouling Paints.” Prog. Org. Coat., 76 1699–1700 (2013)CrossRef
16.
17.
Kovach, BS, Swain, G, A Boat-Mounted Foil to Measure the Drag Properties of Antifouling Coatings Applied to Static Immersion Panels. Proc. Int. Symp. Seawater Drag Reduction, Newport, RI, 1998
18.
Townsin, R, Anderson, C, “Fouling Control Using Low Surface Energy, Foul Release Technology” In: Advances in Marine Antifouling Coatings and Technologies, pp. 693–708. Woodhead Publishers, Cambridge, 2009
19.
20.
Schultz, MP, “Effects of Coating Roughness and Biofouling on Ship Resistance and Powering.” Biofouling, 23 331–341 (2007)CrossRef
21.
Schultz, MP, Swain, GW, “The Influence of Biofilms on Skin Friction Drag.” Biofouling, 15 129–139 (2000)CrossRef
22.
Amfilokhiev, W, Conn, J, “Note on the Interaction Between the Viscous and Wavemaking Component Resistances.” R. Inst. Naval Archit. Trans., 113 43–57 (1971)
23.
Paik, JK, Frieze, PA, “Ship Structural Safety and Reliability.” Prog. Struc. Eng. Mater., 3 198–210 (2001)CrossRef
24.
Salta, M, Wharton, JA, Stoodley, P, Dennington, SP, Goodes, LR, Werwinski, S, Mart, U, Wood, RJK, Stokes, KR, “Designing Biomimetic Antifouling Surfaces.” Philos. Trans. R. Soc. A, 368 4729–4754 (2010)CrossRef
25.
U. S. Naval Institute, “Marine Fouling and its Prevention.” Woods Hole Oceanographic Institute. (1952)
26.
King, M, “The Measurement of Ship Hull Roughness.” Wear, 83 385–397 (1982)CrossRef
27.
Parnell, KE, Kofoed-Hansen, H, “Wakes From Large High-Speed Ferries in Confined Coastal Waters: Management Approaches with Examples From New Zealand and Denmark.” Coastal Manag., 29 217–237 (2001)CrossRef
28.
Kim, W, Van, S, Kim, D, “Measurement of Flows Around Modern Commercial Ship Models.” Exp. Fluids., 31 567–578 (2001)CrossRef
29.
30.
31.
Lackenby, H, “Resistance of Ships, with Special Reference to Skin Friction and Hull Surface Condition.” Arch. Proc. Inst. Mech. Eng., 176 981–1014 (1962)CrossRef
32.
Munk, T, Kane, D, Yebra, D, “The Effects of Corrosion and Fouling on the Performance of Ocean-Going Vessels: A Naval Architectural Perspective.” In: Advances in Marine Antifouling Coatings and Technologies, pp. 148–176 Woodhead Publishing, Cambridge, 2009
33.
Capurro, LRA, In: Griffith, DE (ed.) Oceanography for Practicing Engineers. Barnes & Noble, Inc., New York (1970)
34.
Padhy, CP, Sen, D, Bhaskaran, PK, “Application of Wave Model for Weather Routing of Ships in the North Indian Ocean.” Nat. Hazards., 44 373–385 (2008)CrossRef
35.
Havelock, TH, “The Pressure of Water Waves Upon a Fixed Obstacle.” Proc. R. Soc. Lond., 175 409–421 (1940)CrossRef
36.
Kinsman, B, Wind Waves: Their Generation and Propagation on the Ocean Surface. Courier Dover Publications, Mineola, NY, 1965
37.
Mei, CC, Stiassnie, M, Yue, DKP, Theory and Applications of Ocean Surface Waves: Nonlinear Aspects. World Scientific Publishing, Singapore, 2005
38.
Newman, J, Marine Hydrodynamics. MIT Press, Cambridge, 1977
39.
Dobretsov, S, Abed, RMM, Voolstra, CR, “The Effect of Surface Colour on the Formation of Marine Micro and Macrofouling Communities.” Biofouling, 29 617–627 (2013)CrossRef
40.
Zargiel, KA, Swain, GW, “Static Vs Dynamic Settlement and Adhesion of Diatoms to Ship Hull Coatings.” Biofouling, 1–15 (2013)
41.
Granville, P, “Drag-Characterization Method for Arbitrarily Rough Surfaces by Means of Rotating Disks.” J. Fluids Eng., 104 373–377 (1982)CrossRef
42.
Haslbeck, EG, Bohlander, GS, “Microbial Biofilm Effects on Drag-Lab and Field.” SNAME., 3A 1–7 (1992)
43.
Holm, E, Schultz, M, Haslbeck, E, Talbott, W, “Field, “Evaluation of Hydrodynamic Drag on Experimental Fouling-Release Surfaces, Using Rotating Disks.” Biofouling, 20 219–226 (2004)CrossRef
44.
Loeb, G, Laster, D, Gracik, T, “The Influence of Microbial Fouling Films on Hydrodynamic Drag of Rotating Discs.” In: Costlow, JD, Tipper, RC (eds.) Marine Biodeterioration: An Interdisciplinary Study, pp. 88–94. Naval Institute Press, Annapolis, MD (1984)CrossRef
45.
Candries, M, Atlar, M, Mesbahi, E, Pazouki, K, “The Measurement of the Drag Characteristics of Tin-Free Self-polishing Co-polymers and Fouling Release Coatings Using a Rotor Apparatus.” Biofouling, 19 27–36 (2003)CrossRef
46.
Ghani, MPA, Karim, K, Milani, K, “Experimental Investigation of the Drag Characteristics of Different Ship Hull Coating with Using Rotor Apparatus.” Jurnal Mekanikal, 31 92–102 (2010)
47.
Kawaguchi, Y, Ashida, T, Ando, H, Senda, T, “Development of Drag Reducing Antifouling Paint and Experimental Investigation on Mass Transfer Phenomenon Near the Painted Wall.” 1–10
48.
Mirabedini, S, Pazoki, S, Esfandeh, M, Mohseni, M, Akbari, Z, “Comparison of Drag Characteristics of Self-polishing Co-polymers and Silicone Foul Release Coatings: A Study of Wettability and Surface Roughness.” Prog. Org. Coat., 57 421–429 (2006)CrossRef
49.
Weinell, CE, Olsen, KN, Christoffersen, MW, Kiil, S, “Experimental Study of Drag Resistance Using a Laboratory Scale Rotary Set-Up.” Biofouling, 19 45–51 (2003)CrossRef
50.
TNO, Provided by e-mail from Job Klinjstra, 4 July 2014.
51.
De Jong, P, Te, GM, Kiezebrink, E, “Prediction of the Adherence, Growth and Release of Microorganisms in Production Chains.” Int. J. Food Microbiol., 74 13–25 (2002)CrossRef
52.
Childs, PRN, Rotating Flows. Butterworth-Heinemann, Oxford, 2010
53.
Candries, M, “Drag, Boundary-Layer and Roughness Characteristics of Marine Surfaces Coated with Antifoulings.” [PhD Thesis]. Department of Marine Technology UK: University of Newcastle-Upon-Tyne. (2001)
54.
Schultz, MP, “The Relationship Between Frictional Resistance and Roughness for Surfaces Smoothed by Sanding.” J. Fluids Eng., 124 492–499 (2002)CrossRef
55.
Hochkirch, K, Brandt, H, “Fullscale Hydrodynamic Force Measurement on the Berlin Sail–Force–Dynamometer.” 14th Chesapeake Sailing Yacht Symposium, 1–13 (1999)
56.
Barton, A, Sargison, J, Brandner, P, Walker, G, “A Force Balance to Measure the Total Drag of Biofilms on Test Plates.” Aus. Fluid Mech. Conf., 16 819–824 (2011)
57.
Swain, GW, Kovach, B, Touzot, A, Casse, F, Kavanagh, CJ, “Measuring the Performance of Today’s Antifouling Coatings.” J. Ship Product., 23 164–170 (2007)
58.
Brett, TM, “Head-Loss Measurements on Hydroelectric Conduits.” J. Hydraul. Div., 106 173–190 (1980)
59.
Leer-Andersen, M, Larsson, L, “An Experimental/Numerical Approach for Evaluating Skin Friction on Full-Scale Ships with Surface Roughness.” J. Mar. Sci. Technol., 8 26–36 (2003)
60.
Picologlou, BF, Characklis, WG, Zelver, N, “Biofilm Growth and Hydraulic Performance.” J. Hydraul. Div., 106 733–746 (1980)
61.
Candries, M, Atlar, M, “Experimental Investigation of the Turbulent Boundary Layer of Surfaces Coated with Marine Antifoulings.” J. Fluids Eng., 127 219–232 (2005)CrossRef
62.
Schultz, MP, “Turbulent Boundary Layers on Surfaces Covered with Filamentous Algae.” Trans. Am. Soc. Mech. Eng J. Fluids Eng., 122 357–363 (2000)CrossRef
63.
Ünal, UO, Ünal, B, Atlar, M, “Turbulent Boundary Layer Measurements Over Flat Surfaces Coated by Nanostructured Marine Antifoulings.” Exp. Fluids, 52 1431–1448 (2012)CrossRef
64.
Schultz, MP, “Frictional Resistance of Antifouling Coating Systems.” J. Fluids Eng., 126 1039–1047 (2004)CrossRef
65.
Christensen, BE, Characklis, WG, “Physical and Chemical Properties of Biofilms.” In: Biofilms, pp. 93–130, Wiley, New York, 1990
66.
Schultz, M, Myers, A, “Comparison of Three Roughness Function Determination Methods.” Exp. Fluids, 35 372–379 (2003)CrossRef
67.
Moody, LF, “Friction Factors for Pipe Flow.” Trans. ASME, 66 671–684 (1944)
68.
Schlichting, H, Boundary Layer Theory. McGraw-Hill, New York, 1968
69.
Flack, KA, Schultz, MP, Rose, WB, “The Onset of Roughness Effects in the Transitionally Rough Regime.” Int. J. Heat Fluid Flow, 35 160–167 (2012)CrossRef
70.
Gadelmawla, E, Koura, M, Maksoud, T, Elewa, I, Soliman, H, “Roughness Parameters.” J. Mater. Process. Technol., 123 133–145 (2002)CrossRef
71.
Blunt, L, Jiang, X, “Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards ‘SURFSTAND’.” Elsevier, London, 2003
72.
Chang, W, Hirvonen, M, Grönqvist, R, “The Effects of Cut-Off Length on Surface Roughness Parameters and Their Correlation with Transition Friction.” Saf. Sci., 42 755–769 (2004)CrossRef
73.
Howell, D, Behrends, B, “A Review of Surface Roughness in Antifouling Coatings Illustrating the Importance of Cutoff Length.” Biofouling, 22 401–410 (2006)CrossRef
74.
Berglin, M, Larsson, A, Jonsson, PR, Gatenholm, P, “The Adhesion of the Barnacle, Balanus Improvisus, to Poly(dimethylsiloxane) foling-Release Coatings and Poly(methyl methacrylate) Panels: The Effect of Barnacle Size on Strength and Failure Mode.” J. Adhes. Sci. Technol., 15 1485–1502 (2001)CrossRef
75.
Thouvenin, M, Peron, J, Charreteur, C, Guerin, P, Langlois, J, Vallee-Rehel, K, “A Study of the Biocide Release from Antifouling Paints.” Prog. Org. Coat., 44 75–83 (2002)CrossRef
76.
Aldred, N, Scardino, A, Cavaco, A, de Nys, R, Clare, AS, “Attachment Strength is a Key Factor in the Selection of Surfaces by Barnacle Cyprids (Balanus amphitrite) During Settlement.” Biofouling, 26 287–299 (2010)CrossRef
77.
Scardino, AJ, Guenther, J, De Nys, R, “Attachment Point Theory Revisited: The Fouling Response to a Microtextured Matrix.” Biofouling, 24 45–53 (2008)CrossRef
78.
Scardino, AJ, De Nys, R, “Mini Review: Biomimetic Models and Bioinspired Surfaces for Fouling Control.” Biofouling, 27 73–86 (2011)CrossRef
79.
Molland, AF, The Maritime Engineering Reference Book: A Guide to Ship Design, Construction and Operation. Butterworth-Heinemann, Oxford, 2008
80.
Grigson, C, “Drag Losses of New Ships Caused by Hull Finish.” J. Ship Res., 36 182–196 (1992)
81.
Musker, AJ, “Universal Roughness Functions for Naturally-Occurring Surfaces.” Trans. Can. Soc. Mech. Eng., 1 1–6 (1980–1981)
82.
Hama, FR, “Boundary-Layer Characteristics for Smooth and Rough Surfaces.” SNAME, 333–356 (1954)
83.
Fitzsimmons, P, Ellis, J, “A Two-Parameter Roughness Analyser and Performance Software.” International Workshop on Marine Roughness and Drag. London: RINA., 4 1–13 (1990)
84.
Andrewartha, J, Perkins, K, Sargison, J, Osborn, J, Walker, G, Henderson, A, Hallegraeff, G, “Drag Force and Surface Roughness Measurements on Freshwater Biofouled Surfaces.” Biofouling, 26 487–496 (2010)CrossRef
85.
Khor, YS, Xiao, Q, “CFD Simulations of the Effects of Fouling and Antifouling.” Ocean Eng., 38 1065–1079 (2011)CrossRef
86.
Schultz, M, Swain, G, “The Effect of Biofilms on Turbulent Boundary Layers.” J. Fluids Eng., 121 44–51 (1999)CrossRef
87.
Conn, JFC, Lackenby, H, Walker, WP, “Resistance Experiments on the Lucy Ashton.” Trans INA., 95 350–436 (1953)
88.
Watanabe, S, Nagamatsu, N, Yokoo, K, Kawakami, Y, “The Augmentation in Frictional Resistance Due to Slime.” J. Kansai Soc. Naval Arch., 131 45–51 (1969)CrossRef
89.
Lewthwaite, J, Molland, A, Thomas, K, “An Investigation into the Variation of Ship Skin Frictional Resistance with Fouling.” Trans. RINA., 127 269–284 (1985)
90.
Millett, J, Anderson, C, “1997, Fighting Fast Ferry Fouling.” Fast’97, Conference Papers, 1 493–495 (1997)
91.
Malone, JA, Little, DE, “Effects of Hull Foulants and Cleaning/Coating Practices on Ship Performance and Economics.” Soc. Nav. Arch. Mar. Eng., 88 75–101 (1980)
92.
Townsin, R, Byrne, D, “Speed, Power and Roughness: The Economics of Outer Bottom Maintenance, Speed, Power and Roughness.” R. Inst. Naval Arch., 6 459–483 (1980)
93.
Corbett, JJ, Winebrake, PJJ, Green, E, Comer, B, “Energy and GHG Emissions Savings Analysis of Fluoropolymer Foul Release Hull Coating.” Energy and Environmental Research Associates, LLC, 2010
94.
Schultz, M, Bendick, J, Holm, E, Hertel, W, “Economic Impact of Biofouling on a Naval Surface Ship.” Biofouling, 27 87–98 (2010)CrossRef
95.
Bohlander, J, Zealand, MBN, “Review of Options for In-water Cleaning of Ships.” New Zealand: MAF. Biosecurity, 42 1–34 (2009)
Metadaten
Titel
Effects of biofouling development on drag forces of hull coatings for ocean-going ships: a review
Publikationsdatum
01.05.2015
Erschienen in
Journal of Coatings Technology and Research / Ausgabe 3/2015
Print ISSN: 1547-0091
Elektronische ISSN: 1935-3804
DOI
https://doi.org/10.1007/s11998-014-9651-2

Weitere Artikel der Ausgabe 3/2015

Journal of Coatings Technology and Research 3/2015 Zur Ausgabe

Review Article

Use of nanofillers in wood coatings: a scientific review

OriginalPaper

Synthesis of ADI/HDI hybrid isocyanurate and its application in polyurethane coating

OriginalPaper

A facile approach to superhydrophobic LiAl-layered double hydroxide film on Al–Li alloy substrate

Brief Communication

A simple method to make mechanically robust, adhesive and superhydrophobic surface based on epoxy resin

OriginalPaper

Effect of polyether soft segments on structure and properties of waterborne UV-curable polyurethane nanocomposites

OriginalPaper

Study of mechanical behavior, deformation, and fracture of nano-multilayer coatings during microindentation and scratch test

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise