Abstract
In recent years, aluminum alloy based metal matrix composites (MMC) are gaining importance in several aerospace and automobile applications. Aluminum 6061 has been used as matrix material owing to its excellent mechanical properties coupled with good formability and its wide applications in industrial sector. Addition of SiCp as reinforcement in Al6061 alloy system improves its hardness, tensile strength and wear resistance. In the present investigation Al6061-SiCp composites was fabricated by liquid metallurgy route with percentages of SiCp varying from 4 wt% to 10 wt% in steps of 2 wt%. The cast matrix alloy and its composites have been subjected to solutionizing treatment at a temperature of 530°C for 1 h followed by quenching in different media such as air, water and ice. The quenched samples are then subjected to both natural and artificial ageing. Microstructural studies have been carried out to understand the nature of structure. Mechanical properties such as microhardness, tensile strength, and abrasive wear tests have been conducted both on matrix Al6061 and Al6061-SiCp composites before and after heat treatment. However, under identical heat treatment conditions, adopted Al6061-SiCp composites exhibited better microhardness and tensile strength reduced wear loss when compared with Al matrix alloy.
Similar content being viewed by others
References
Anwar Khan A R, Ramesh C S and Ramachandra A 2002 Heat treatment of Al6061-SiC composites, Proceedings of the int. conf. on manufacturing (Dhaka: ICM) pp 21–28
Appendino P, Badini C, Marino F and Tomari A 1991 J. Mater. Sci. & Eng. A135 275
Doel T J A and Bowen P 1996 Composites A27 655
Gui M C, Wang D B, Wu J -J, Yuan G -J and Gli C 2000 J. Mater. Sci. &Technol. 16 556
Gupta M and Surappa M K 1995 J. Mater. Sci. Letts 14 1283
Hoskings F M, Portillo F F, Wunderlin R and Mehrabian R 1982 J. Mater. Sci. 17 477
Pramila Bai B N, Ramasesh B S and Surappa M K 1992 Wear 157 295
Ramesh C S 1988 Preparation and properties of Al-feldspar composites, M E thesis, Bangalore University, Bangalore
Ramesh C S, Anwar Khan A R, Ravikumar N and Savanprabhu 2005 Int. J. Wear 259 602
Ray S 1993 Mater. Sci. 28 5397
Robi P S, Sharma V M, Kulkarni M D, Prasad R C and Ramakrishnan P 1996 Processing and properties of Al-alloy matrix composites, Proceedings of ADCOMP (Bangalore: Indian Institute of Science) pp 217–225
Sahin Y and Acilar M 2003 Composite A34 709
Salvo L and Surey M 1994 J. Mater. Sci. & Eng. A177 19
Surappa M K 2003 Metal matrix composites, in Materials research: Current scenario and future projections (eds) R Chidambaram and S Banerjee (New Delhi: Allied Publishers Pvt Ltd) pp 301–318
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Prabhu Swamy, N.R., Ramesh, C.S. & Chandrashekar, T. Effect of heat treatment on strength and abrasive wear behaviour of Al6061-SiCp composites. Bull Mater Sci 33, 49–54 (2010). https://doi.org/10.1007/s12034-010-0007-y
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12034-010-0007-y