Abstract
Thin plates of 21% Cr ferritic stainless steel welded by pulsed gas tungsten arc welding at different pulse frequencies were investigated for the microstructure characteristics and hardness behavior. The welds contained columnar grains in the outer part and fine equiaxed grains in the central region due to the pulsed process.
Similar content being viewed by others
References
Ding Qizhan. Welding of Stainless Steel[M]. China Machine Press, Beijing, China, 2009 (in Chinese).
Srinivasan P B, Kumar M P. Characterization of microstructure and corrosion behaviour of thin section AISI 430 stainless steel gas tungsten arc weldment[J]. Corrosion Engineering Science and Technology, 2009, 44(2): 137–143.
Reddy G M, Mohandas T. Explorative studies on grain refinement of ferritic stainless steel welds[J]. Journal of Materials Science Letters, 2001, 20(8): 721–723.
Ram G D, Mitra T K, Raju M K et al. Use of inoculants to refine weld solidification structure and improve weldability in type 2090 Al-Li alloy[J]. Materials Science and Engineering A, 2000, 276(1): 48–57.
Madhusudhan R G, Gokhale A A, Prasad R K. Optimization of pulse frequency in pulsed current gas tungsten arc welding of aluminium-lithium alloy sheets[J]. Materials Science and Technology, 1998, 14(1): 61–66.
Tseng K H, Chou C P. The effect of pulsed GTA welding on the residual stress of a stainless steel weldment[J]. Journal of Materials Processing Technology, 2002, 123(3): 346–353.
Pal K, Pal S K. Effect of pulse parameters on weld quality in pulsed gas metal arc welding: A review[J]. Journal of Materials Engineering and Performance, 2011, 20(6): 918–931.
Author information
Authors and Affiliations
Corresponding author
Additional information
Hu Shengsun, born in 1956, male, Prof.
Rights and permissions
About this article
Cite this article
Hu, S., Han, R., Shen, J. et al. Effect of pulse frequency on microstructure of 21% Cr ferritic stainless steel in pulsed gas tungsten arc welding. Trans. Tianjin Univ. 19, 127–129 (2013). https://doi.org/10.1007/s12209-013-1803-4
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12209-013-1803-4