Abstract
Present study deals with the optimization of biodiesel production using rapeseed oil as feedstock and NaOCH3 as a catalyst. Optimization of different reaction parameters, such as catalyst concentration, reaction temperature, reaction time. and alcohol to oil molar ratio, was done using response surface methodology (RSM). The optimal experimental conditions for biodiesel production were as follows: catalyst concentration (%) 0.30, reaction temperature 55°C, molar ratio 6.75, and reaction time 60 min. Under these optimal conditions, 97.5 percentage yield of biodiesel was obtained. The observed and predicted values of rapeseed oil methyl esters (ROMEs) yield showed a linear relationship. The fuel properties such as specific gravity 0.876 ± 0.01, flash point 168 ± 0.48°C, fire point 197.8 ± 0.31°C, pour point −7 ± 0.060°C, cloud point −2 ± 0.10°C kinematic viscosity 4.42 ± 0.26 mm2/sec, and sulfur content 0.002 mg/Kg of the produced biodiesel show the suitability of rapeseed oil biodiesel, as fuel. Moreover, engine performance test of the Rapeseed oil biodiesel (rapeseed oil methyl esters, ROME) was examined. The results showed that CO and particulate matter (PM) emissions of the ROME were lower than those of diesel fuel. NOX emissions of the ROME were lower for B5, B20, B40, and B50, while higher for B80 and B100. These results show the environment benefits of biodiesel.
Similar content being viewed by others
References
Saifuddin, N. and K. H. Chua (2004) Production of ethyl ester (biodiesel) from used frying oil: Optimization of transesterification process using microwave irradiation. M. J. Chem. 6: 77–82.
Antolin, G., F. Y. Tinaut, Y. Briceno, V. Castano, C. Perez, and A. I. Ramirez (2002) Optimisation of biodiesel production by sunflower oil transesterification. Bioresour. Technol. 83: 111–114.
Lang, X., A. K. Dalai, N. N. Bakhshi, M. J. Reaney, and P. B. Hertz (2001) Preparation and characterization of biodiesel from various bio oils. Bioresour. Technol. 80: 53–62.
Schwab, A. W., M. O. Bagby, and B. Freedman (1987) Preparation and properties of diesel fuels from vegetable oils. Fuel 66: 1372–1378.
Alencar, J. W., P. B. Alves, and A. A. Craveiro (1983) Pyrolysis of tropical vegetable oils. J. Agric. Food Chem. 31: 1268–1270.
Freedman, B., E. H. Pryde, and T. L. Mounts (1984) Variables affecting the yield of fatty esters from transesterified vegetable oils. J. Am. Oil Chem. Soc. 61: 1638–1643.
Encinar, J. M., J. F. Gonzalez, and A. Rodriguez-Reinares (2005) Biodiesel from used frying oil, variables affecting the yields and characteristics of the biodiesel. Ind. Eng. Chem. Res. 44: 5491–5499.
Raymond, H. M. and C. M. Douglas (2002) Response surface methodology process and product optimization using designed experiments. 2nd ed. John Wiley & Sons, Inc.
Rashid, U. and F. Anwar (2008) Production of biodiesel through optimized alkaline-catalyzed transesterification of rapeseed oil. Fuel 86: 265–271.
Ma, F., L. D. Clements, and M. A. Hanna (1998) Effects of catalyst, free fatty acids and water on transesterification of beef tallow. Transactions of the ASAE 41: 1261–1264.
Vicente, G., M. Martinez, and J. Aracil (2004) Integrated biodiesel production: a comparison of different homogeneous catalysts system. Bioresour. Technol. 92: 297–305.
Rashid, U. and F. Anwar (2008) Production of biodiesel through base-catalyzed transesterification of safflower oil using an optimized protocol. Energy & Fuels 22: 1306–1312.
Rashid, U., F. Anwar, M. A. Tariq, A. Muhammad, and A. Mushtaq (2009) Optimization of alkaline transesterification of rice bran oil for biodiesel production using response surface methodology. J. Chem. Technol. Biotechnol. 84: 1364–1370.
Pramanik, K. (2003) Properties and use of Jatropha curcas oil and diesel fuel blends in compression ignition engine. Renew Energy 28: 239–248.
Wang, L. H., B. Yang, X. Q. Du, and C. Yi (2008) Optimisation of supercritical fluid extraction of flavonoids from Pueraria lobata. Food Chem. 108: 737–741.
Leung, D. Y. C. and Y. Guo (2006) Transesterification of neat and used frying oil: Optimization for biodiesel production. Fuel Proc. Technol. 87: 883–890.
Zhang, Y., M. A. Dube, D. D. McLean, and M. Kates (2003) Biodiesel production from waste cooking oil: Economic assessment and sensitivity analysis. Bioresour. Technol. 90: 229–240.
Krisnangkura, K. and R. Simamaharnnop (1992) Continuous transmethylation of palm oil in an organic solvent. J. Am. Oil Chem. Soc. 69: 166–169.
Alamu, O. J., M. A. Waheed, S. O. Jekayinfa, and T. A. Akintola (2007) Optimal transesterification duration for biodiesel production from nigerian palm kernel oil. Int. J. Agric. Eng. 9: 1–11.
Guo, Y. (2005) Alkaline-catalyzed production of biodiesel fuel from virgin canola oil and recycled waste oils. Ph. D. Thesis. Department of Mechanical Engineering, the University of Hong Kong, Hong Kong.
Eevera, T., K. Rajendran, and S. Saradha (2009) Biodiesel production process optimization and characterization to assess the suitability of the product for varied environmental conditions. Renew Energy 34: 762–765.
Meher, L. C., V. S. S. Dharmagadda, and S. N. Naik (2006) Optimization of Alkali-catalyzed transesterification of Pongamia Pinnata oil for production of biodiesel. Bioresour. Technol. 97: 1392–1397.
Tat, M. E., J. H. Gerpen, and P. S. Wang (2007) Fuel property effects on injection timing, ignition timing, and oxides of nitrogen emissions from biodiesel-fueled engines. Am. Soc. Agricultural Eng. 50: 1123–1128.
USEPA (2002) A Comprehensive Analysis of Biodiesel Impacts on Exhaust Emissions. Draft Technical Report 420-P-02-001. http://www.epa.gov/otaq/models/
Ramadhas, A. S., C. Muraleedharan, and S. Jayaraj (2005) Performance and emission evaluation of a diesel engine fueled with methyl esthers of rubber seed oil. Renew. Energ. 30: 1789–1800.
Puhan, S., N. Vedaraman, B. V. B. Ram, G. Sankarnarayanan, and K. Jeychandran, (2005) Mahua oil (madhuca indica seed oil) methyl ester as biodiesel preparation and emission characteristics. Biomass Bioenerg. 28: 87–93.
Yücesu, H. S. and C. lkiliç (2006) Effect of cotton seed oil methyl ester on the performance and exhaust emission of a diesel engine. Energ Source Part A 28: 389–398.
Rakopoulos, C. D., K. A. Antonopoulos, D. C. Rakopoulos, D. T. Hountalas, and E. G. Giakoumis (2006) Comparative performance and emissions study of a direct injection diesel engine using blends of diesel fuel with vegetable oils or bio-diesels of various origins. Energy Convers Manage 47: 3272–3287.
Graboski, M. S. and R. L. McCormick (1998) Combustion of fat and vegetable oil derived fuels in diesel engines. Prog. Energy Combust Sci. 24: 125–164.
Jeong, G. T., Y. T. Oh, and D. H. Park (2006) emission profile of rapeseed methyl ester and its blend in a diesel engine. Appl. Biochem. Biotech. 129: 165–178.
Almeida, S. C. A., C. R. Belchior, M. V. G. Nascimento, L. S. R. Vieira, and G. Fleury (2002) Performance of a diesel generator fueled with palm oil. Fuel 81: 2097–2102.
Coltrain, D. (2002) Biodiesel: Is it worth considering? The proceedings of’ Risk and Profit Conference’. August 15–16. Kansas State University, Holiday Inn, Manhattan, Kansas.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Saqib, M., Mumtaz, M.W., Mahmood, A. et al. Optimized biodiesel production and environmental assessment of produced biodiesel. Biotechnol Bioproc E 17, 617–623 (2012). https://doi.org/10.1007/s12257-011-0569-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12257-011-0569-6