Abstract
Gumushane is a small city located on highway connecting the harbour city Trabzon in the Black Sea Region of Turkey to the Eastern Anatolia. Following an excavation to create an area for housing on the northeast side of this highway, a large and rapid planar failure inclined to the southwest occurred. A large amount of fractured and weathered granitic material moved downward over this planar failure. After the failure, the highway was closed to traffic for 1 week, and more than ten houses on top of this failure were collapsed completely. The present study aims to investigate the mechanism of this failure. The study was performed using kinematical, limit equilibrium and numerical analyses for both post- and pre-failure conditions. Based on the detailed field observations, the failure mode was determined to be planar, and the slide mechanism was determined to be controlled by three fault planes. As a result of these analyses, it can be concluded that the slope before failure had critical conditions and that the excavation and uncontrolled blasting triggered and accelerated the slope failure.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
ASTM (2005) Laboratory determination of pulse velocities and ultrasonic elastic constants of rock. ASTM, p 7
Barton N (1976) The shear strength of rock and rock joints. Int J Rock Mech Min Sci Geomech Abstr 13(9):255–279
Barton N, Bandis SC (1990) Review of predictive capabilities of JRC-JCS model in engineering practice. International Symposium on Rock Joints. Loen, Proceedings, pp 603–610
Barton N, Choubey V (1977) The shear strength of rock joints in theory and practice. Rock Mech 1(2):1–54
Bektas O, Yılmaz C, Taslı K, Akdag K, Özgür S (1995) Cretaceous rifting of the eastern Pontide carbonate platform (NE Turkey): the formation of carbonates breccias and turbidites as evidences of a drowned platform. Geologia 57(1–2):233–244
CANMET (1977) Pit slope manual: supplement 5–1, plane shear analysis. Canmet Report 77–16, p 307
Deere DU, Miller RP (1966) Engineering classification and index properties for intact rock: Air Force Weapons Laboratory Technical Report, AFWL-TR, 65–116, p 277
Dokuz A (2011) A slab detachment and delamination model for the generation of carboniferous high potassium I-type magmatism in the Eastern Pontides, NE Turkey: the Köse composite pluton. Gondwana Res 19:926–944
Duman TY, Çan T, Emre O, Keçer M, Doğan A, Ateş Ş, Durmaz S (2005) Landslide inventory of north western Anatolia, Turkey. Eng Geol 77:99–114
Kandilli Observatory and Earthquake Research Institute (2010) www.koeri.boun.edu.tr. Accessed 20 December 2010
Emam A, El-Fakharani AHS, Felesteen AW, Selim SA, Hafez KM (2012) Catastrophic movement of rocks and proposed solutions to avoid its risks in the Abu El-Reesh area, northeast Aswan City, Egypt. Arab J Geosci 5(4):607–616
Fell R, Walker BF, Finlay PJ (1996) Estimating the probability of landsliding. Proc. 7th Australian New Zealand Conference on Geomechanics. Adelaide. Institution of Engineers Australia, Canberra, pp 304–311
Ferreira MQ (2007) Natural and man-made causes for the “Elisio de Moura” earth flow in Coimbra, Portugal. Bull Eng Geol Env 66:35–43
Genc S (1993) Structural and geomorphological aspects of the Çatak landslide, NE Turkey. Q J Eng Geol Hydrogeol 26(2):99–108
Gokceoglu C, Sönmez H, Nefeslioglu HA, Duman TY, Can T (2005) The March 17, 2005 Kuzulu landslide (Sivas, Turkey) and landslide susceptibility map of its near vicinity. Eng Geol 81(1):65–83
Goodman RE (1980) Methods of geological engineering in discontinuous rock. Wiley, NY, p 478
Güven İH (1993) 1:250000-scaled geology and compilation of the Eastern Pontide. General Directorate of Mineral Research and Exploration (MTA) of Turkey, Ankara (unpublished)
Hoek E, Bray JW (1981) Rock slope engineering. IMM, London
Hoek E, Brown ET (1997) Practical estimates of rock mass strength. Int J Rock Mech Min Sci Geomech Abstr 27(3):227–229
Hoek E, Diederichs MS (2006) Empirical estimation of rock mass modulus. Int J Rock Mech Min Sci 43:203–215
Hoek E, Carranza-Torres C, Corkum B (2002) Hoek–Brown failure criterion—2002 edition. In: Hammah R, Bawden W, Curan J, Telesnicki M (eds) Proceedings of NARMS-TAC2002. Mining Innovation and Technology, Toronto, pp 267–273
Hungr O, Evans SG, Hazzard J (1999) Magnitude and frequency of rock falls and rock slides along the main transportation corridors of southwest British Columbia. Canad Getech J 36:224–238
ISRM (1981) In: Brown ET (ed) ISRM suggested method: rock characterization, testing and monitoring. Pergamon, London
Jaiswal P, Van Westen CJ, Jetten V (2011) Quantitative assessment of landslide hazard along transportation lines using historical records. Landslides. doi:10.1007/s10346-011-0252-1
Mantovani F, Gracia FJ, Domenico de Cosmo P, Suma A (2010) A new approach to landslide geomorphological mapping using the Open Source software in the Olvera area (Cadiz, Spain). Landslides 7:69–74
Ocakoglu F, Gokceoglu C, Ercanoglu M (2002) Dynamics of a complex mass movement triggered by heavy rainfall: a case study from NW Turkey. Geomorphology 42(3–4):329–341
Ocakoglu F, Acikalin S, Gokceoglu C, Karabacak V, Cherkinsky A (2009) A multistory gigantic subaerial debris flow in an active fault scarp from NW Anatolia: anatomy, mechanism and timing. Holocene 19(6):955–965
Palmstrom A (2005) Measurements of and correlations between block size and rock quality designation (RQD), Tunnel. Underground Space Technol 20(4):362–377
Pradhan B, Youssef AM (2010) Manifestation of remote sensing data and GIS on landslide hazard analysis using spatial-based statistical models. Arab J Geosci 3(3):319–326
Reis S, Yalçın A, Nişancı R, Yomralıoğlu T (2007) Evaluation of geomorphological features using remote sensing and GIS techniques in (Semi) arid areas, Gumushane (NE-Turkey). J Geol Soc India 69(2):261–273
Rocscience (2002) Dips v5.1 user’s guide. Rocscience, Toronto
Rocscience (2008) Phase2 v7.0 2D finite element program for calculating stresses and estimating support around the underground excavations. Geomechanics Software and Research. Rocscience, Toronto
Rocscience (2010) RocPlane v2.0 Surface planar failure analysis. Rocscience, Toronto
Sarkar K, Singh TN, Verma AK (2012) A numerical simulation of landslide-prone slope in Himalayan region—a case study. Arab J Geosci 5(1):73–81
Sayisal Grafik (2010) www.sayisalgrafik.com. Accessed 20 March 2010
Sönmez H, Ulusay R (2002) A discussion on the Hoek–Brown failure criterion and suggested modifications to the criterion verified by slope stability case studies. An Earth Sci J 26:77–99
Tarcan G, Koca MY (2001) Hydrogeological and geotechnical assessments of the Kadifekale Landslide Area, İzmir, Turkey. Environ Geol 40(3):289–299
Topuz G, Altherr R, Siebel W, Schwarz WH, Zack T, Hasözbek A, Barth M, Satır M, Şen C (2010) Carboniferous high-potassium I-type granitoid magmatism in the Eastern Pontides: The Gümüşhane pluton (NE Turkey). Lithos 116:92–110
Turkish State Meteorological Service (2010) www.dmi.gov.tr. Accessed 15 December 2010
Turkish Statistical Institute (2010) www.tuik.gov.tr. Accessed 17 December 2010
Acknowledgments
The authors would like to express their sincerest gratitude to the editor and reviewers for their excellent comments. Constructive comments and helpful suggestions from Dr. Abdurrahman Dokuz are greatly appreciated.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Alemdag, S., Akgun, A., Kaya, A. et al. A large and rapid planar failure: causes, mechanism, and consequences (Mordut, Gumushane, Turkey). Arab J Geosci 7, 1205–1221 (2014). https://doi.org/10.1007/s12517-012-0821-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12517-012-0821-1