Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
International Journal of Plastics Technology
Erschienen in: International Journal of Plastics Technology 1/2015

01.06.2015 | Review Article

Process parameter optimization of plastic injection molding: a review

verfasst von: Satadru Kashyap, Dilip Datta

Erschienen in: International Journal of Plastics Technology | Ausgabe 1/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Over the years, injection molding has been a premier manufacturing technique in the production of intricate polymer components. Its molding efficiency rests on the shoulders of multiple process and machine parameters, which dictate the final product quality in terms of multiple output responses. It is imperative to state that a precise optimization of various input parameters is paramount for achieving the desired quality indices. In this article, a review of different techniques employed till date for optimizing various injection molding parameters is presented along with their advantages and limitations. It is found in the review that a complete intelligent technique operable without human interference is yet to be developed.
Nächster Artikel Characterization and evaluation of a novel renewable plant product (RPP) gum as a flame retardant additive in chloroprene and natural rubber

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Alam K, Kamal MR (2004) Runner balancing by a direct genetic optimization of shrinkage. Polym Eng Sci 44(10):1949–1959CrossRef
2.
Alam MR, Lee KS, Rahman M, Zhang YF (2003) Process planning optimization for the manufacture of injection moulds using a genetic algorithm. Int J Comput Integr Manuf 16(3):181–191CrossRef
3.
Al-Refaie A, Li MH (2011) Optimizing the performance of plastic injection molding using weighted additive model in goal programming. Int J Fuzzy Syst Appl 1(2):43–54CrossRef
4.
Altan M (2010) Reducing shrinkage in injection moldings via the Taguchi, ANOVA and neural network methods. Mater Des 31(1):599–604CrossRef
5.
Azaman MD, Sapuan SM, Sulaiman S, Zainudin ES, Abdan K, Mansor MR (2013) An investigation of the processability of natural fibre reinforced 13 polymer composites on shallow and flat thin-walled parts by injection moulding process. Mater Des 50:451–456CrossRef
6.
Azaman MD, Sapuan SM, Sulaiman S, Zainudin ES, Khalina A (2013) Shrinkages and warpage in the processability of wood-filled polypropylene composite thin-walled parts formed by injection molding. Mater Des 52:1018–1026CrossRef
7.
Bourdon K (1989) The selection and setting of injection molding machines by means of process simulation. In Annual Technical Conference (ANTEC-1989), pages 308–311, New York. Society of Plastic Engineers (SPE)
8.
Catic I, Slavica M, Sercer M, and Baric G (1996) Expert system aided troubleshooting in polymer engineering. In Annual Technical Conference (ANTEC-1996), pages 837–841, Indiana Polis. Society of Plastic Engineers (SPE)
9.
Chan IW, Pinfold M, Kwong CK, Szeto WH (2014) Automation and optimisation of family mould cavity and runner layout design (FMCRLD) using genetic algorithms and mould layout design grammars. Comput Aided Des 47:118–133CrossRef
10.
Chang TC, Faison E (2001) Shrinkage behaviour and optimization of injection molded parts studied by the Taguchi method. Polym Eng Sci 41(5):703–710CrossRef
11.
Chen WC, Hsu SW (2007) A neural-network approach for an automatic LED inspection system. Expert Syst Appl 33(2):531–537CrossRef
12.
Chen Z, Turng LS (2005) A review of current developments in process and quality control for injection molding. Adv Polym Technol 24(3):165–182CrossRef
13.
Chen RS, Lee HH, Yu CY (1997) Application of Taguchi’s method on the optimal process design of an injection molded PC/PBT automobile bumper. Compos Struct 39(3):209–214CrossRef
14.
Chen CS, Cheng WS, Wang TS, Chien RD (2005) Optimum design of gas-assisted injection molding. J Reinf Plast Compos 24(15):1577–1586CrossRef
15.
Chen J, Li Q, Shen C, and Wang L (2005) Effects of process conditions on shrinkage of the injection-molded part. In Annual Technical Conference (ANTEC-2005), vol 2 Boston, Society of Plastic Engineers (SPE), page 275
16.
Chen J, Savage M, Zhu JJ (2008) Development of artificial neural network- based in-process mixed-material-caused flash monitoring (ANN-IPMFM) system in injection molding. Int J Adv Manuf Technol 36(1–2):43–52CrossRef
17.
Chen WC, Lai TT, Fu GL, and Chen CT (2008) A systematic optimization approach in the MISO plastic injection molding process. In International Conference on Service Operations and Logistics, and Informatics (SOLI-2008), volume 2, pages 2741–2746. IEEE
18.
Chen WC, Wang MW, Fu GL, and Chen CT (2008) Optimization of plastic injection molding process via Taguchis parameter design method, BPNN, and DFP. In International Conference on Machine Learning and Cybernetics, volume 6, pages 3315–3321. IEEE
19.
Chen CP, Chuang MT, Hsiao YH, Yang YK, Tsai CH (2009) Simulation and experimental study in determining injection molding process parameters for thin-shell plastic parts via design of experiments analysis. Expert Syst Appl 36(7):10752–10759CrossRef
20.
Chen WC, Fu GL, Tai PH, Deng WJ (2009) Process parameter optimization for MIMO plastic injection molding via soft computing. Expert Syst Appl 36(2):1114–1122CrossRef
21.
Chen W, Zhou XH, Wang HF, Wang W (2010) Multi-objective optimal approach for injection molding based on surrogate model and particle swarm optimization algorithm. J Shanghai Jiaotong Univ 15:88–93CrossRef
22.
Chen WL, Huang CY, Hung CW (2010) Optimization of plastic injection molding process by dual response surface method with non-linear programming. Eng Comput 27(8):951–966CrossRef
23.
Chen CC, Su PL, Chiou CB, Chiang KT (2011) Experimental investigation of designed parameters on dimension shrinkage of injection molded thinwall part by integrated response surface methodology and genetic algorithm: A case study. Mater Manuf Process 26(3):534–540CrossRef
24.
Chen WL, Huang CY, Huang CY (2013) Finding efficient frontier of process parameters for plastic injection molding. J Ind Eng Int 9(1):25CrossRef
25.
Chen WC, Liou PH, and Chou SC (2014) An integrated parameter optimization system for MIMO plastic injection molding using soft computing. International Journal of Advanced Manufacturing Technology, pages 1–10
26.
Cheng J, Liu Z, Tan J (2013) Multi-objective optimization of injection molding parameters based on soft computing and variable complexity method. Int J Adv Manuf Technol 66(5–8):907–916CrossRef
27.
Chiang HH, Hieber CA, Wang KK (1991) A unified simulation of the filling and post-filling stages in injection molding. Part II: experimental verification. Polym Eng Sci 31(2):125–139CrossRef
28.
Dang XP (2014) General frameworks for optimization of plastic injection molding process parameters. Simul Model Pract Theory 41:15–27CrossRef
29.
Deng YM, Lam YC, Britton GA (2004) Optimization of injection moulding conditions with user-definable objective functions based on a genetic algorithm. Int J Prod Res 42(7):1365–1390CrossRef
30.
Deng YM, Zhang Y, Lam YC (2010) A hybrid of mode-pursuing sampling method and genetic algorithm for minimization of injection molding warpage. Mater Des 31(4):2118–2123CrossRef
31.
Ding LP, Tan JR, Wei Z, Chen WL, Gao Z (2011) Multi-objective performance design of injection molding machine via a new multi-objective optimization algorithm. Int J Innov Comput, Inf Control 7(7):3939–3949
32.
Duverlie P, Castelain JM (1999) Cost estimation during design step: parametric method versus case based reasoning method. Int J Adv Manuf Technol 15(12):895–906CrossRef
33.
Farshi B, Gheshmi S, Miandoabchi E (2011) Optimization of injection molding process parameters using sequential simplex algorithm. Mater Des 32(1):414–423CrossRef
34.
Feng J, Wang L, Zhang RY, Wu JJ, Wang CY, Yang MB, Fu XR (2014) Formation of double skin-core orientated structure in injection-molded polyethylene parts: effects of ultra-high molecular weight polyethylene and temperature field. J Polym Res 21(5):1–14CrossRef
35.
Gao Y, Wang X (2008) An effective warpage optimization method in injection molding based on the Kriging model. Int J Adv Manuf Technol 37(9–10):953–960CrossRef
36.
Gao Y, Wang X (2009) Surrogate-based process optimization for reducing warpage in injection molding. J Mater Process Technol 209(3):1302–1309CrossRef
37.
Gao Y, Turng LS, Wang X (2008) Adaptive geometry and process optimization for injection molding using the Kriging surrogate model trained by numerical simulation. Adv Polym Technol 27(1):1–16CrossRef
38.
Hieber CA, Shen SF (1980) A finite-element/finite-difference simulation of the injection-molding filling process. J Non-Newtonian Fluid Mech 7(1):1–32CrossRef
39.
Huang MC, Tai CC (2001) The effective factors in the warpage problem of an injection-molded part with a thin shell feature. J Mater Process Technol 110(1):1–9CrossRef
40.
Huang SN, Tan KK, Lee TH (2004) Neural-network-based predictive learning control of ram velocity in injection molding. IEEE Trans Syst Man Cybern Part C Appl Rev 34(3):363–368CrossRef
41.
Huang J, Lu X, Zhang G, Qu J (2014) Study on the rheological, thermal and mechanical properties of thermoplastic polyurethane/poly (butylene terephthalate) blends. Polym Test 36:69–74CrossRef
42.
Iniesta AA, Alcaraz JLG, Borbón MR (2013) Optimization of injection molding process parameters by a hybrid of artificial neural network and artificial bee colony algorithm. Rev Fac Ing Univ Antioquia 67:43–51
43.
Jan TC, OBrien KT (1993) A user-friendly, interactive expert system for the injection moulding of engineering thermoplastics. Int J Adv Manuf Technol 8(1):42–51CrossRef
44.
Jeng YR, Liu DS, Yau HT (2013) Fast numerical algorithm for optimization mold shape of direct injection molding process. Mater Manuf Process 28(6):689–694
45.
Jong WR and Hsu SS (1997) An integrated expert system for injection molding process. In Annual Technical Conference (ANTEC-1997), Tornto, Society of Plastic Engineers (SPE) pages 541–544
46.
Kang GJ (2014) Process factor optimization for reducing warpage and shrinkage in injection molding using design of experiments. Appl Mech Mater 541:359–362CrossRef
47.
Karasu MK, Cakmakci M, Cakiroglu MB, Ayva E, Demirel-Ortabas N (2014) Improvement of changeover times via Taguchi empowered SMED/case study on injection molding production. Measurement 47:741–748CrossRef
48.
Kate KH, Onbattuvelli VP, Enneti RK, Lee SW, Park SJ, Atre SV (2012) Measurements of powder-polymer mixture properties and their use in powder injection molding simulations for aluminum nitride. JOM 64(9):1048–1058CrossRef
49.
Kate KH, Enneti RK, Onbattuvelli VP, Atre SV (2013) Feedstock properties and injection molding simulations of bimodal mixtures of nanoscale and microscale aluminum nitride. Ceram Int 39(6):6887–6897CrossRef
50.
Kenig S, Ben-David A, Omer M, Sadeh A (2001) Control of properties in injection molding by neural networks. Eng Appl Artif Intell 14(6):819–823CrossRef
51.
Kim SJ, Lee KI, and Kim YI (1996) Optimization of injection-molding conditions using genetic algorithm. In SPIE Fourth International Conference on Computer-Aided Design and Computer Graphics, volume 2644, pages 173–180
52.
Kitayama S, Onuki R, Yamazaki K (2014) Warpage reduction with variable pressure profile in plastic injection molding via sequential approximate optimization. Int J Adv Manuf Technol 72(5–8):827–838CrossRef
53.
Krauss VA, Pires EN, Klein AN, Fredel MC (2005) Rheological properties of alumina injection feedstocks. Mater Res 8(2):187–189CrossRef
54.
Kurtaran H, Erzurumlu T (2006) Efficient warpage optimization of thin shell plastic parts using response surface methodology and genetic algorithm. Int J Adv Manuf Technol 27(5–6):468–472CrossRef
55.
Kurtaran H, Ozcelik B, Erzurumlu T (2005) Warpage optimization of a bus ceiling lamp base using neural network model and genetic algorithm. J Mater Process Technol 169(2):314–319CrossRef
56.
Kwong CK, Smith GF (1998) A computational system for process design of injection moulding: combining a blackboard-based expert system and a case-based reasoning approach. Int J Adv Manuf Technol 14(5):350–357CrossRef
57.
Kwong CK, Smith GF, Lau WS (1997) Application of case based reasoning injection moulding. J Mater Process Technol 63(1):463–467CrossRef
58.
Lam YC, Zhai LY, Tai K, Fok SC (2004) An evolutionary approach for cooling system optimization in plastic injection moulding. Int J Prod Res 42(10):2047–2061CrossRef
59.
Lam YC, Deng YM, Au CK (2006) A GA/gradient hybrid approach for injection moulding conditions optimisation. Eng Comput 21(3):193–202CrossRef
60.
Lau HCW, Ning A, Pun KF, Chin KS (2001) Neural networks for the dimensional control of molded parts based on a reverse process model. J Mater Process Technol 117(1):89–96CrossRef
61.
Lenz J, Enneti RK, Onbattuvelli VP, Kate KH, Martin R, Atre SV (2012) Powder injection molding of ceramic engine components for transportation. JOM 64(3):388–392CrossRef
62.
Li CG and Wu Y (2010) Evolutionary optimization of plastic injection mould cooling system layout design. In International Conference onIntelligent System Design and Engineering Application (ISDEA-2010), vol 1 I.E. Press, pages 693–696
63.
Li E, Jia L, Yu J (2002) A genetic neural fuzzy system-based quality prediction model for injection process. Comput Chem Eng 26(9):1253–1263CrossRef
64.
Li E, Jia L, Yu J (2004) A genetic neural fuzzy system and its application in quality prediction in the injection process. Chem Eng Commun 191(3):335–355CrossRef
65.
Li D, Zhou H, Zhao P, Li Y (2009) A realtime process optimization system for injection molding. Polym Eng Sci 49(10):2031–2040CrossRef
66.
Liao SJ, Chang DY, Chen HJ, Tsou LS, Ho JR, Yau HT, Su YC (2004) Optimal process conditions of shrinkage and warpage of thinwall parts. Polym Eng Sci 44(5):917–928CrossRef
67.
Liao SJ, Hsieh WH, Wang JT, Su YC (2004) Shrinkage and warpage prediction of injectionmolded thinwall parts using artificial neural networks. Polym Eng Sci 44(11):2029–2040CrossRef
68.
Liao X, Yan X, Xia W, and Luo B (2010) A fast optimal Latin hypercube design for Gaussian process regression modelling. In Third International Workshop onAdvanced Computational Intelligence (IWACI-2010), pages 474–479. IEEE
69.
Lotti C, Ueki MM, Bretas RES (2002) Prediction of the shrinkage of injection molded iPP plaques using artificial neural networks. J Injection Molding Technol 6(3):157–176
70.
Lu NY, Gong GX, Yang Y, Lu JH (2012) Multi-objective process parameter optimization for energy saving in injection molding process. J Zhejiang Univ Sci A 13(5):382–394CrossRef
71.
Luong LH, Chan FT, and Ip RW (1997) A knowledge-based system for fault diagnosis in plastic injection moulding. In International Conference of Manufacturing Automation (ICMA’97), Hong Kong, volume 2, pages 947–952
72.
Maier HR, Dandy GC (1998) Understanding the behaviour and optimising the performance of back-propagation neural networks: an empirical study. Environ Model Softw 13(2):179–191CrossRef
73.
Manjunath PG, Krishna P (2012) Prediction and optimization of dimensional shrinkage variations in injection molded parts using forward and reverse mapping of artificial neural networks. Adv Mater Res 463:674–678CrossRef
74.
Martin R, Vick M, Enneti RK, Atre SV (2013) Powder injection molding of ceria-stabilized, zirconia-toughened mullite parts for UAV engine components. JOM 65(11):1388–1394CrossRef
75.
Mathivanan D, Parthasarathy NS (2009) Sink-mark minimization in injection molding through response surface regression modeling and genetic algorithm. Int J Adv Manuf Technol 45(9–10):867–874CrossRef
76.
Mehat NM, Kamaruddin S (2011) Investigating the effects of injection molding parameters on the mechanical properties of recycled plastic parts using the Taguchi method. Mater Manuf Process 26(2):202–209CrossRef
77.
Mehat NM, Kamaruddin S (2011) Multi-response optimization of injection moulding processing parameters using the Taguchi method. Polym-Plast Technol Eng 50(15):1519–1526CrossRef
78.
Mehat NM, Kamaruddin S (2011) Optimization of mechanical properties of recycled plastic products via optimal processing parameters using the Taguchi method. J Mater Process Technol 211(12):1989–1994CrossRef
79.
Menges G, Thienel P (1977) Pressurespecific volumetemperature behavior of thermoplastics under normal processing conditions. Polym Eng Sci 17(10):758–763CrossRef
80.
Mok SL, Kwong CK, Lau WS (1999) Review of research in the determination of process parameters for plastic injection molding. Adv Polym Technol 18(3):225–236CrossRef
81.
Mok SL, Kwong CK, Lau WS (2001) A hybrid neural network and genetic algorithm approach to the determination of initial process parameters for injection moulding. Int J Adv Manuf Technol 18(6):404–409CrossRef
82.
Murakami T, Okamura T and Tanizaki N (1993) An operation assisted system for injection molding machines based on constraints processing. In Twelveth Triennial World Congress of the International Federation of Automatic Control, volume 4, pages 455–460
83.
Nagarsheth PS (1989) An integrated system approach for injection molded plastic parts from design to fabrication. In Annual Technical Conference (ANTEC-1989), pages 220–223. Society of Plastic Engineers (SPE)
84.
Oktem H, Erzurumlu T, Uzman I (2007) Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part. Mater Des 28(4):1271–1278CrossRef
85.
Onbattuvelli VP (2010) The effects of nanoparticle addition on the processing, structure and properties of SiC and AlN. PhD thesis, Oregon State University, USA.
86.
Onbattuvelli VP, Vallury S, McCabe T, Park SJ, Atre SV (2010) Properties of SiC and AlN feedstocks for the powder injection moulding of thermal management devices. Powder Injection Moulding Int 4(3):64–70
87.
Onbattuvelli VP, Enneti RK, Sohn SB, McCabe T, Park SJ, Atre S (2011) Micro-powder injection moulding of barium titanate. Powder Injection Moulding Int 5(4):59–65
88.
Osswald T, Hernández-Ortiz JP (2006) Polymer processing. Hanser Publishers, MunichCrossRef
89.
Özek C, Çelık YH (2012) Calculating molding parameters in plastic injection molds with ANN and developing software. Mater Manuf Process 27(2):160–168
90.
Pandelidis I, Zou Q (1990) Optimization of injection molding design. Part II: molding conditions optimization. Polym Eng Sci 30(15):883–892CrossRef
91.
Pandelidis I, Zou Q and Lingard TJ (1988) Optimization of gate location and operational molding conditions for injection molding. In Annual Technical Conference (ANTEC-1988), volume 46, pages 18–20. Society of Plastic Engineers (SPE)
92.
Patcharaphun S, Mennig G (2006) Simulation and experimental investigations of material distribution in the sandwich injection molding process. Polym-Plast Technol Eng 45(6):759–768CrossRef
93.
Quach A, Simha R (1971) Pressurevolumetemperature properties and transitions of amorphous polymers; polystyrene and poly (orthomethylstyrene). J Appl Phys 42(12):4592–4606CrossRef
94.
Rahman WA, Sin LT, Rahmat AR (2008) Injection moulding simulation analysis of natural fiber composite window frame. J Mater Process Technol 197(1):22–30CrossRef
95.
Raviwongse R, Allada V (1997) Artificial neural network based model for computation of injection mould complexity. Int J Adv Manuf Technol 13(8):577–586CrossRef
96.
Ribeiro CJ and Viana JC (2011) Optimization of injection moulded polymer automotive components. In Chiaberge, M., editor, New Trends and Developments in Automotive System Engineering, ISBN: 978-953-307-517-4
97.
Sadeghi BHM (2000) A BP-neural network predictor model for plastic injection molding process. J Mater Process Technol 103(3):411–416CrossRef
98.
Sahu R, Yao D and Kim B (1997) Optimal mold design methodology to minimize warpage in injection molded parts. In Annual Technical Conference (ANTEC-1997), volume 3, pages 3308–3313, Toronto. Society of Plastics Engineers (SPE)
99.
Shelesh-Nezhad K, Siores E (1997) An intelligent system for plastic injection molding process design. J Mater Process Technol 63(1):458–462CrossRef
100.
Shen C, Wang L, Li Q (2007) Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method. J Mater Process Technol 183(2):412–418CrossRef
101.
Shi F, Lou ZL, Zhang YQ, Lu JG (2003) Optimisation of plastic injection moulding process with soft computing. Int J Adv Manuf Technol 21(9):656–661CrossRef
102.
Song MC, Liu Z, Wang MJ, Yu TM, Zhao DY (2007) Research on effects of injection process parameters on the molding process for ultra-thin wall plastic parts. J Mater Process Technol 187-188:668–671CrossRef
103.
Spina R (2006) Optimisation of injection moulded parts by using ann-pso approach. J Achiev Mater Manuf Eng 15(1–2):146–152
104.
Stanek M, Manas D, Manas M, Suba O (2011) Optimization of injection molding process. Int J Math Comput Simul 5(5):413–421
105.
Szücs A, Belina K (2012) Rheological and thermal analysis of the filling stage of injection moulding. Express Polym Lett 6(8):672–679CrossRef
106.
Taguchi G, Konishi S (1987) Orthogonal arrays and linear graphs: tools for quality engineering. American Supplier Institute, Allen Park
107.
Taguchi G, Elsayed EA and Hsiang TC (1989) Quality Engineering in Production Systems. McGraw-Hill College
108.
Tang SH, Tan YJ, Sapuan SM, Sulaiman S, Ismail N, Samin R (2007) The use of Taguchi method in the design of plastic injection mould for reducing warpage. J Mater Process Technol 182(1):418–426CrossRef
109.
Tseng WJ (1998) Statistical analysis of process parameters influencing dimensional control in ceramic injection molding. J Mater Process Technol 79(1):242–250CrossRef
110.
Tzeng CJ, Yang YK, Lin YH, Tsai CH (2012) A study of optimization of injection molding process parameters for SGF and PTFE reinforced PC composites using neural network and response surface methodology. Int J Adv Manuf Technol 63(5–8):691–704CrossRef
111.
Väätäinen O, Järvelä P, Valta K (1994) The effect of processing parameters on the quality of injection moulded parts by using the Taguchi parameter design method. Plast Rubber Compos Process Appl 21(4):211–217
112.
Vagelatos GA, Rigatos GG, Tzafestas SG (2001) Incremental fuzzy supervisory controller design for optimizing the injection molding process. Expert Syst Appl 20(2):207–216CrossRef
113.
Wang VW, Hieber CA, Wang KK (1986) Dynamic simulation and graphics for the injection molding of three-dimensional thin parts. J Polym Eng 7(1):21–45
114.
Wang H, Ruan XY, Zhou XH (2003) Research on injection mould intelligent cost estimation system and key technologies. Int J Adv Manuf Technol 21(3):215–222CrossRef
115.
Wang R, Zeng J, Feng X, Xia Y (2013) Evaluation of effect of plastic injection molding process parameters on shrinkage based on neural network simulation. J Macromol Sci B 52(1):206–221CrossRef
116.
Wang YQ, Kim JG, Song JI (2014) Optimization of plastic injection molding process parameters for manufacturing a brake booster valve body. Mater Des 56:313–317CrossRef
117.
Xia W, Luo B, Liao XP (2011) An enhanced optimization approach based on Gaussian process surrogate model for process control in injection molding. Int J Adv Manuf Technol 56(9–12):929–942CrossRef
118.
Yang YK (2006) Optimization of injection-molding process of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via design of experiments method: a case study. Mater Manuf Process 21(8):915–921CrossRef
119.
Yarlagadda PK (2002) Development of an integrated neural network system for prediction of process parameters in metal injection moulding. J Mater Process Technol 130:315–320CrossRef
120.
Yarlagadda PK, Khong CAT (2001) Development of a hybrid neural network system for prediction of process parameters in injection moulding. J Mater Process Technol 118(1):109–115CrossRef
121.
Yen C, Lin JC, Li W, Huang MF (2006) An abductive neural network approach to the design of runner dimensions for the minimization of warpage in injection mouldings. J Mater Process Technol 174(1):22–28CrossRef
122.
Yin F, Mao H, Hua L (2011) A hybrid of back propagation neural network and genetic algorithm for optimization of injection molding process parameters. Mater Des 32(6):3457–3464CrossRef
123.
Yin F, Mao H, Hua L, Guo W, Shu M (2011) Back Propagation neural network modeling for warpage prediction and optimization of plastic products during injection molding. Mater Des 32(4):1844–1850CrossRef
124.
Zhai M, Lam YC, Au CK (2009) Runner sizing in multiple cavity injection mould by non-dominated sorting genetic algorithm. Eng Comput 25(3):237–245CrossRef
125.
Zhao P, Zhou H, Li Y, Li D (2010) Process parameters optimization of injection molding using a fast strip analysis as a surrogate model. Int J Adv Manuf Technol 49(9–12):949–959CrossRef
126.
Zhao P, Zhou H, He Y, Cai K, Fu J (2014) A nondestructive online method for monitoring the injection molding process by collecting and analyzing machine running data. Int J Adv Manuf Technol 72(5–8):765–777CrossRef
Metadaten
Titel
Process parameter optimization of plastic injection molding: a review
verfasst von
Satadru Kashyap
Dilip Datta
Publikationsdatum
01.06.2015
Verlag
Springer India
Erschienen in
International Journal of Plastics Technology / Ausgabe 1/2015
Print ISSN: 0972-656X
Elektronische ISSN: 0975-072X
DOI
https://doi.org/10.1007/s12588-015-9115-2

Weitere Artikel der Ausgabe 1/2015

International Journal of Plastics Technology 1/2015 Zur Ausgabe

Research Article

Glutaraldehyde cross-linked sulphonated poly styrene ethylene butylene poly styrene membranes for methanol fuel cells

Research Article

Production, characterization and prediction of mechanical properties of waste fibre reinforced composite panels for application in adjustable partition walls of buildings

Research Article

Characterization and evaluation of a novel renewable plant product (RPP) gum as a flame retardant additive in chloroprene and natural rubber

Research Article

Mechanical, thermal and fire properties of sustainable rigid polyurethane foam derived from cashew nut shell liquid

Research Article

Effect of compatibilizer on the morphology development, static and dynamic mechanical properties of polymer-polymer composites from LDPE and PET

Research Article

Proton conducting solid polymer electrolytes based carboxymethyl cellulose doped ammonium chloride: ionic conductivity and transport studies

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise