Abstract
Nitrogen can increase the strength of steels without weakening the toughness and improve the corrosion resistance at the same time. Compared with conventional nitrogen-free die steels, a new type of nitrogen-containing die steel was developed with many superior properties, such as high strength, high hardness, and good toughness. This paper focused on the effects of heat treatment on the microstructures and mechanical properties of the new type of nitrogen-containing die steel, which were investigated by the optimized deformation process and heat treatment. Isothermal spheroidal annealing and high-temperature quenching as well as high-temperature tempering were applied in the experiment by means of an orthogonal method after the steel was multiply forged. The mechanical properties of nitrogen-containing die steel forgings are better than the standard of NADCA #207-2003.
Similar content being viewed by others
References
J. Li and Y.H. Huang, High Nitrogen Steels and Stainless Steels: Manufacturing, Properties and Applications, Chemical Industry Press, Beijing, 2006, p.33.
G. Stein and I. Huchlenbroich, Manufacturing and applications of high nitrogen steels, Mater. Manuf. Processes, 19(2004), No.1, p.7.
T. Rashev, Development of laboratory and industrial installations for one stage production of HNS, Mater. Manuf. Processes, 19(2004), No.1, p.31.
J. Chen, The study of H13 steel and its heat treatment, Heat Treat. Technol. Equip., 29(2008), No.4, p.44.
D. Klobčar, J. Tušek, and B. Taljat, Thermal fatigue of materials for die-casting tooling, Mater. Sci. Eng. A, 472(2008), No.1–2, p.198.
J.X. Xie, J.Y. Li, Y.L. Chen, and B. Liu, An Approach by Adding Nitrogen Element to Improve the Performance of H13 Die Steel, Chinese Patent, Appl.200910237524.1, 2009.
X.L. Liu, Study on property of high-quality hot working die steel SWPH13, Heat Treat., 21(2006), No.2, p.34.
YB/T 5127-93, Steel-Determination of Critical Point-Dilatometric Method.
A.Q. Zou, F.Y. Deng, and P.R. Deng, Effect of isothermal spheroidization on microstructure and properties of steel H13, Heat Treat. Met., 28(2003), No.8, p.34.
D.S. Ma, J. Zhou, Z.Z. Chen, Z.K. Zhang, Q.A. Chen, and D.H. Li, Influence of thermal homogenization treatment on structure and impact toughness of H13 ESR steel, J. Iron Steel Res. Int., 16(2009), No.5, p.56.
NADCA #207-2003, Premium and Superior Quality H13 Steel and Heat Treatment Acceptance Criteria for Pressure Die Casting Dies, NADCA Die Materials Committee, Illinois, 2003, p.2.
Y.X. Tian, M.H. Lu, H.Y. Cai, G.H. Yin, and Z. Xu, Effects of quenching temperature on microstructure and mechanical properties of H13 mandrel steel, Baosteel Tech. Res., 4(2010), No.3, p.58.
A. Bahrami, S.H.M. Anijdan, M.A. Golozar, M. Shamanian, and N. Varahram, Effects of conventional heat treatment on wear resistance of AISI H13 tool steel, Wear, 258(2005), No.5–6, p.846.
M.X. Wei, S.Q. Wang, L. Wang, X.H. Cui, and K.M. Chen, Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel, Tribol. Int., 44(2011), No.7–8, p.898.
P. Wang, J.J. Zhang, and Y.M. Hu, The application of H13 steel, Die Mould Manuf., 7(2007), No.12, p.4.
F.Y. Li, D.S. Ma, Z.Z. Chen, J.H. Liu, Q.L. Yong, and Z. Kang, Structure and properties of high temperature diffused-superfining treated die steel H13, Spec. Steel, 29(2008), No.3, p.65.
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was financially supported by the National Natural Science Foundation of China (Nos.50974014 and 51174026).
Rights and permissions
About this article
Cite this article
Li, Jy., Zhao, P., Yanagimoto, J. et al. Effects of heat treatment on the microstructures and mechanical properties of a new type of nitrogen-containing die steel. Int J Miner Metall Mater 19, 511–517 (2012). https://doi.org/10.1007/s12613-012-0588-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-012-0588-0