Abstract
6063 Al alloys was cryorolled under solutionized (sample1) and peak aged condition (sample2) to study the role of dynamic precipitation on the strengthening mechanism. It is observed that in case of sample1 dislocations density is more compare to sample2. In the 1st case high angle sub grains (presence of high fraction of HAGBs) of less than 100 nm in size have been generated during cryorolling. In case of sample2, grains are aligned along the rolling direction. This is obvious that the higher densities of dislocations (in sample1) restrict the grain boundaries to be aligned along the rolling direction. Therefore, the grain boundaries are aligned along the rolling direction only in case of sample2. Whereas such type of alignments of grain boundaries are not observed in case of sample1. Presence of very fine grains along with high density of dislocations are responsible for attaining higher strength of sample1 compare to sample2.
Similar content being viewed by others
References
Niranjani V L, Hari Kumar K C and Subramanya Sarma V, Mater. Sci.& Eng. A 515 (2009) 169.
Valiev R.Z, Islamgaliev R.K and Alexandrov I.V, Prog. Mater. Sci. 45 (2000) 103.
Saito Y, Utsunomiya H, Tsuji N and Sakai T, Acta Mater., 47 (1999) 579.
Huang Y and Prangnell P B, Scripta Mater. 56 (2007) 333.
A statistical review on aluminium shipments by major market, United States and Canada, 2004.
Angella G, Bassani P, Tuissi A and Vedani M, Mater. Trans. 45 (2004) 2282.
Yassar Reza S, Field David P and Weiland Hasso, Scripta Materialia, 53 (2005) 299.
Matasuda K, Terasaki M, Tada S and Ikeno S, J. Japan Inst. light Metals, 45 (1995) 95.
Miao W F and Laughlin D E, Metall. Mater. Trans. A, 31 (2000) 361.
Miao W F and Laughlin D E, Scripta Mater. 40 (1999) 873.
Dutta I and Allen S.M, J Mater. Sci. Lett. 10 (1991) 323.
Murayama M and Hono K, Acta Mater. 47 (1999) 1537–1548.
Andersen S J, Zandbergen H W, Jansen J, Traeholt C, Tundal U and Reiso O, Acta Mater. 46 (1998), 3283.
Edwards G A, Stiller K, Dunlop G L and Couper M J, Acta Mater. 46 (1998) 3893.
Roven H J, Liu M and Werenskiold J C, Mater. Sci. & Eng. A, 483 (2008) 54.
Urrutia Gutierrez, Munoz-Morris M A and Morris D G, Mater. Sci. Eng. A, 394 (2005) 399.
Marioara C D, Andersen S J, Jansen J and Zandbergen H W, Acta Mater., 51 (2003) 789.
Miao W F and Laughlin D E, Metall. Mater. Trans. A, 31 (2000) 361.
Kim W J, Wang J Y, Cho S O, Cho H J and Sohn H T, Mater. Sci. & Eng. 520A, (2009) 23.
Iwahashi Y, Horita Z, Nemoto M and Langdon T G, Metallurgical And Materials Transactions A, 29A (1998) 2503.
Liu Z, Chen Xu, Han X and Gu Y, Materials Science and Engineering: A, 527(16–27) (2010) 4300.
Cheng S, Zhao Y S, Zhu Y T and Ma E, Acta Mater., 55 (2007) 5822.
Das G, Das Mousumi, Ghosh Sabita, Dubey Paritosh and Ray A K, Mat. Sci. & Eng. A, 527 (2010) 1590.
Das Goutam, Das Mousumi, Sinha Subhasis, Gupta Kalyan Kumar, Chakroborty Sanchita and Ray Ashok Kumar, Mat. Sci. & Eng. A, 513–514 (2009) 389.
Ghosh Sabita, Yadav Sandip and Das G, Materials Letter, 62(17–18) (2008) 2619.
Rajinikanth V, Venkateswarlu K, Sen Mani Kuntal, Das Mousumi, Alhajeri Saleh N and Langdon Terence G, Materials Science & Engineering A, in press.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Das, M., Das, G. Role of dynamic precipitation on the strengthening mechanism of cryorolled 6063 Al alloy. Trans Indian Inst Met 64, 75 (2011). https://doi.org/10.1007/s12666-011-0015-7
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12666-011-0015-7