Abstract
The concept of functionally graded materials is effectively applied to design and fabricate engineering components with location-specific wear resistance suited to the particular application. The present study describes the wear behaviour of centrifugally cast A319 aluminium functionally graded metal matrix composites (FGMMC) formed from 20 wt% SiCp-reinforced composite. Liquid stir casting method is used for homogeneous metal matrix composite preparation followed by vertical centrifugal casting for FGMMC rings production. Microstructure analysis of specimen reveals a homogeneous distribution of SiCp reinforcements for the gravity and a gradient particle distribution, in the radial direction forming different zones, for the centrifugal castings. The dry sliding wear behaviour is studied on a DUCOM pin-on-disc tribometer with steel disc and by using FGMMC pins produced from different zones. Wear studies show gradient tribological properties, within a component, with a maximum wear resistance at the particle rich region, lesser in transition zone and the minimum wear resistance at the inner zones. SEM observation confirms abrasive wear predominance by revealing the microgrooves and ploughing on the worn-out surfaces.
Similar content being viewed by others
References
Rajan T P D, Pillai R M, and Pai B C, Int J Cast Met Res, 21 (2008) 1.
Nairobi B D, Humberto Melgarejo Z, and Marcelo Sua´rez O, Mat Char 55 (2005) 167.
Karamis M B, Alper Cerit A, Selcuk B, and Nair F, Wear 289 (2012) 73.
Md Aminul Islam, and Zoheir N Farhat, Tribol Int 44 (2011) 498.
Kennedy F E, Balbahadur A C, and Lashmore D S, Wear 203–204 (1997) 715.
Vieira A C, Sequeira P D, Gomes J R, and Rocha L A, Wear 267 (2009) 585.
Rosenberger M R, Schvezov C E, and Forlerer E, Wear 259 (2005) 590.
Chen R, Iwabuchi A, and Shimizu T, Wear, 238 (2000) 110.
Kumar D, Roy H, and Show B K, Tribol Trans 58 (2015) 518.
Singh S, Garg M, and Batra N K, Tribol Trans 58 (2015) 758.
Shorowordi K M, Haseeb A S M A, and Celis J P, Wear 256 (2004) 1176.
Natarajan N, Vijayarangan S, and Rajendran I, Wear 261 (2006) 812.
Majumdar J D, Chandra B R, and Manna I, Wear 262 (2007) 641.
Das S, Mondal D P, Sawla S, and Ramakrishnan N, Wear 264 (2008) 47.
Shivamurthya R C, and Surappa M K, Wear 271 (2011) 1946.
Ozben T, Kilickap E, and Orhan C, J Mater Process Technol 198 (2008) 220.
Goto H, and Omor S, Tribol Trans 43 (2000) 57.
Tavitas-Medrano F J, Gruzleski J E, Samuel F H, Valtierra S, and Doty H W, Mater Sci Eng A 480 (2008) 356.
Dwivedi D K, Mater Des 31 (2010) 2517.
Deuis R L, Subramanian C, and Yellup J M, Compos Sci Technol 57 (1997) 415.
Rajeev V R, Dwivedi D K, and Jain S C, Mater Des 31 (2010) 4951.
Miracle D B, Compos Sci Technol 65 (2005) 2526.
Acknowledgements
The authors are grateful to the director, CSIR-NIIST, and members of Materials Science and Technology Division, CSIR-NIIST, for their support during the work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jayakumar, E., Praveen, A.P., Rajan, T.P.D. et al. Studies on Tribological Characteristics of Centrifugally Cast SiCp-Reinforced Functionally Graded A319 Aluminium Matrix Composites. Trans Indian Inst Met 71, 2741–2748 (2018). https://doi.org/10.1007/s12666-018-1442-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-018-1442-5