References
B. Smitha, S. Sridhar, and A. A. Khan, J. Membr. Sci., 259, 10 (2005).
L. Li, B. Liu, S. Liu, Z. Liu, Y. Yu, L. Jing, and Z. Jiang, Macromol. Res., 21, 719 (2013).
A. S. Arico, S. Siracusano, N. Briguglio, V. Baglio, A. Di Blasi, and V. Antonucci, J. Appl. Electrochem., 43, 107 (2013).
N. W. Deluca and Y. A. Elabd, J. Polym. Sci. B: Polym. Phys., 44, 2201 (2006).
P. Kumar, K. Dutta, S. Das, and P. P. Kundu, Int. J. Energy Res., 38, 1367 (2014).
S. C. Roh, J. Hong, and C. K. Kim, Macromol. Res., 20, 197 (2012).
S. Mondal, S. Soam, and P. P. Kundu, J. Membr. Sci., 474, 140 (2015).
Z. Q. Ma, P. Cheng, and T. S. Zhao, J. Membr. Sci., 215, 327 (2003).
G. Y. Moon and J. W. Rhim, Macromol. Res., 16, 524 (2008).
D. J. Kim, S. M. Woo, and S. Y. Nam, Macromol. Res., 20, 1075 (2012).
S.-K. Koh, W.-K. Choi, J.-S. Cho, and S.-K. Song, J. Mater. Res., 11, 2933 (1996).
S. Das, D. P. Das, P. Rajput, J. Ghosh, B. Bhoi, and B. K. Mishra, Plasma Chem Plasma Process, 36, 1125 (2016).
I. P. Jain and G. Agarwal, Surf. Sci. Reports, 66, 77 (2011).
B. Bae, D. Kim, H. J. Kim, T. Lim, I. Oh, and H. Y. Ha, J. Phys. Chem. B, 110, 4240 (2006).
J.-M. Song, J. Shin, J. Sohn, and Y. C. Noh, Macromol. Res., 19, 1082 (2011).
R. Michael and D. Stulik, J. Vac. Sci. Technol. A, 4, 1861 (1986).
S. K. Koh, J. S. Cho, S. Han, K. H. Kim, and Y. W. Beag, in Metallization of Polymers 2, E. Sacher, Eds., Kluwer Academic/Plenum Publishers, New York, 2002, pp 167–184.
S. A. Sheppard, S. A. Campbell, J. R. Smith, G. W. Lloyd, F. C. Walsh, T. R. Ralph, and F. C. Walsh, Analyst, 123, 1923 (1998).
Z. Zhou, R. N. Dominey, J. P. Rolland, B. W. Maynor, A. A. Pandya, and J. M. DeSimone, J. Am. Chem. Soc., 128, 12963 (2006).
D. Ramdutt, C. Charles, J. Hudspeth, B. Ladewig, T. Gengenbach, R. Boswell, A. Dicks, and P. Brault, J. Power Sources, 165, 41 (2007).
S. Han, S. Koh, and K. H. Yoon, J. Electrochem. Soc., 146, 4327 (1999).
K. Scott, SW. M. Taama, P. Argyropoulos, and K. Sundmacher, J. Power Sources, 83, 204 (1999).
Author information
Authors and Affiliations
Corresponding author
Additional information
The image from this article is used as the cover image of the Volume 25, Issue 1.
Electronic supplementary material
Rights and permissions
About this article
Cite this article
Ha, JW., Park, S. Micro-porous patterning of the surface of a polymer electrolyte membrane by an accelerated plasma and its performance for direct methanol fuel cells. Macromol. Res. 25, 1–4 (2017). https://doi.org/10.1007/s13233-017-5008-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13233-017-5008-x