Abstract
This paper highlights a comparative assessment of creep life of 1.25Cr-0.5Mo, 2.25Cr-1Mo and modified 9Cr-1Mo steels based on accelerated creep rupture tests. Creep rupture test data have been analysed and creep life of the above mentioned materials have been assessed using Larson Miller parameter at the stress levels of 60 and 42 MPa for different temperatures. Limiting steam temperatures for minimum design life of 105 h at 42 and 60 MPa for the above mentioned steels have also been calculated. Microstructural studies for the three above mentioned steels are also done.
Similar content being viewed by others
References
R. Viswanathan, W.T. Bakker, Materials for boilers in ultra-supercritical power plants. Proceedings of 2000 International Joint Power Generation Conference, Miami Beach, Florida, July 23–26 (2000)
R. Viswanathan, J.F. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis, R. Purgert, US program on materials technology for ultra-supercritical coal power plants. J. Mater. Eng. Perform. 14(3), 281–292 (2005)
F. Masuyama, Alloy development and material issues with increasing steam temperature. Advances in Materials Technology for Fossil Power Plants, Proceedings from the 4th International Conference, October 25–28, (2004)
P.S. Weitzel, Steam generator for advanced ultra-supercritical power plants 700–760 °C. Presented at ASME 2011 Power Conference, Denver, Colorado, USA, July 12–14, (2011)
The Economic Times, An Indian daily, published by Bennett. Coleman & Co. Ltd, January 27 (2011)
ASTM E 139-11, Standard test method for conducting creep, creep-rupture and stress-rupture tests of metallic materials. American Society for Testing and Materials, Philadelphia, Pa 19103 (2011)
Project Report: SSP-0718, CSIR-National Metallurgical Laboratory, Jamshedpur-831 007, India (2012)
Project Report: SSP-9352, CSIR-National Metallurgical Laboratory, Jamshedpur-831 007, India (2009)
Project Report: SSP-9483, CSIR-National Metallurgical Laboratory, Jamshedpur-831 007, India, (2009)
NRIM CREEP DATA SHEET, No. 43, National Research Institute for Metal (Presently known as NIMS), Japan (1996)
Acknowledgements
The author is grateful to Director, CSIR-National Metallurgical Laboratory, Jamshedpur, India for permission to carry out the work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Roy, P.K. Creep Rupture Analysis and Life Estimation of 1.25Cr-0.5Mo, 2.25Cr-1Mo and Modified 9Cr-1Mo Steel: A Comparative Study. J. Inst. Eng. India Ser. D 99, 33–38 (2018). https://doi.org/10.1007/s40033-017-0141-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40033-017-0141-4