Abstract
A new Ti–V–Mo complex microalloyed hot-rolled high-strength steel sheet was developed by controlling a thermo-mechanical controlled processing (TMCP) schedule, in particular with variants in coiling temperature. The effects of coiling temperature (CT) on various hardening mechanisms and mechanical properties of Ti–V–Mo complex microalloyed high-strength low-alloy steels were investigated. The results revealed that the steels are mainly strengthened by a combined effect of ferrite grain refinement hardening and precipitation hardening. The variation in simulated coiling temperature causes a significant difference in strength, which is mainly attributed to different precipitation hardening increment contributions. When the CT is 600 °C, the experimental steel has the best mechanical properties: ultimate tensile strength (UTS) 1000 MPa, yield strength (YS) 955 MPa and elongation (EL) 17%. Moreover, about 82 wt% of the total precipitates are nano-sized carbide particles with diameter of 1–10 nm, which is randomly dispersed in the ferrite matrix. The nano-sized carbide particles led to a strong precipitation hardening increment up to 310 MPa.
Similar content being viewed by others
References
Z.B. Jiao, C.T. Liu, Mater. China 30, 6 (2011) (in Chinese)
Y. Gan, H. Dong, China Metall. 8, 1 (2004) (in Chinese)
T.Y. Hsu, Shanghai MET 31, 1 (2009) (in Chinese)
W.C. Leslie, The Physical Metallurgy of Steels (McGraw-Hill, New York, 1981)
K.B. Kang, O. Kwon, W.B. Lee, C.G. Park, Scr. Mater. 36, 1303 (1997)
H. Ohtska, M. Umemoto, I. Tamura, in Proceeding of International Conference on Thermec 88 (ISIJ, Tokyo, Japan, 1988), pp. 352–359
A. Bakkaloglu, Mater. Lett. 56, 263 (2002)
I. Tamura, H. Sekine, T. Tanaka, C. Ouchi, Thermomechanical Processing of HSLA Steels (Butterworth and Company, London, 1988)
Y. Funakawa, T. Shiozaaki, K. Tomita, T. Yamamoto, E. Maeda, ISIJ Int. 44, 1945 (2004)
Y.F. Shen, C.M. Wang, X. Sun, Mater. Sci. Eng., A 528, 8150 (2011)
G. Jha, S. Das, S. Sinha, A. Lodh, A. aldar, Mater. Sci. Eng., A 561, 394 (2013)
Y.W. Kim, S.W. Song, S.J. Seo, S. Hong, C.S. Lee, Mater. Sci. Eng., A 565, 430 (2013)
D.B. Park, M.Y. Huh, J.H. Shim, J.Y. Suh, K.H. Lee, W.S. Jung, Mater. Sci. Eng., A 528, 560 (2013)
C.Y. Chen, H.W. Yen, F.H. Kao, W.C. Li, C.Y. Huang, J.R. Yang, S.H. Wang, Mater. Sci. Eng., A 499, 162 (2009)
H.W. Yen, C.Y. Huang, J.R. Yang, Scr. Mater. 61, 616 (2009)
I.B. Timokhina, P.D. Hodgson, S.P. Ringer, R.K. Zheng, E.V. Pereloma, Scr. Mater. 56, 601 (2007)
J.H. Jang, C.H. Lee, Y.U. Heo, D.W. Suh, Acta Mater. 60, 208 (2012)
F.B. Pickering, B. Garbarz, Mater. Sci. Technol. 5, 227 (1989)
Q.L. Yong, Secondary Phases in Steels (Metallurgy Industry Press, Beiing, 2006) (in Chinese)
R.X. Jia, Y.M. Zhang, Y.M. Zhang, H. Guo, Spectrosc. Spectr. Anal. 30, 1995 (2010)
D.L. Li, J.F. Fang, Q.B. Liu, C.F. Liu, J.Y. Zhang, Metall. Anal. 28, 1 (2008) (in Chinese)
Y.C. Chih, C.C. Chien, R.Y. Jer, Mater. Charact. 88, 69 (2014)
J.H. Jang, Y.U. Heo, C.H. Lee, H.K.D.H. Bhadeshia, D.W. Suh, Mater. Sci. Technol. 29, 309 (2013)
W. Oldfield, ASTM Standardization News (ASTM, West Conshohocken, PA, 1975), pp. 24–29
Q.L. Yong, M.T. Ma, B.R. Wu, Microalloyed Steel-Physical and Mechanical Metallurgy (China Machine Press, Beijing, 1989), p. 65 (in Chinese)
F.R. Nabarro, Theory of Crystal Dislocations (Oxford University Press, London, 1967)
Y.W. Kim, S.G. Hong, Y.H. Huh, C.S. Lee, Mater. Sci. Eng., A 615, 255 (2014)
Y.W. Kim, J.H. Kim, S.G. Hong, C.S. Lee, Mater. Sci. Eng., A 605, 244 (2014)
Z.C. Liu, H.P. Ren, Diffusion Transformation of Supercooled Austensite (Science Press, Beijing, 2007) (in Chinese)
Q.D. Liu, J.C. Peng, W.Q. Liu, B.X. Zhou, Acta Metall. Sin. 45, 1288 (2009) (in Chinese)
B. Ghosh, C.E. Cambell, G.B. Olson, Metall. Mater. Trans. A 30, 501 (1999)
T.P. Wang, F.H. Kao, S.H. Wang, J.R.J.P. Yang, C.Y. Huang, H.R. Chen, Mater. Lett. 65, 396 (2011)
R.W.K. Honeycombe, Metall. Sci. 14, 201 (1980)
Q.L. Yong, L. Zheng, Acta Metall. Sin. A 20, 9 (1984) (in Chinese)
W.B. Lee, S.G. Hong, C.G. Park, K.H. Kim, S.H. Park, Scr. Mater. 43, 319 (2000)
Acknowledgments
This work was financially supported by the National Basic Research Program of China (No. 2010CB630805), the National Natural Science Foundation of China (No. 51201036) and China Iron & Steel Research Institute Group (No. 12060840A).
Author information
Authors and Affiliations
Corresponding author
Additional information
Available online at http://link.springer.com/journal/40195
Rights and permissions
About this article
Cite this article
Zhang, K., Li, ZD., Sun, XJ. et al. Development of Ti–V–Mo Complex Microalloyed Hot-Rolled 900-MPa-Grade High-Strength Steel. Acta Metall. Sin. (Engl. Lett.) 28, 641–648 (2015). https://doi.org/10.1007/s40195-015-0243-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-015-0243-7