Abstract
The galvanic corrosion behavior of carbon fiber reinforced polymers (CFRPs) GM-CFRP and Tepex-CFRP in contact with a Zn-coated DP590 steel in solution containing 0.9 wt% NaCl + 0.1 wt% CaCl2 + 0.075 wt% NaHCO3 was investigated. The results showed that the GM-CFRP/steel couple was initially more resistant to galvanic corrosion, but its galvanic corrosion activity gradually became higher than the Tepex-CFRP/steel couple. The different galvanic behaviors of these two couples were discussed based on the electrochemical performance of GM-CFRP, Tepex-CFRP and DP590 coupons in the testing solution.
Similar content being viewed by others
References
G. Ben, N. Sugimoto, Y. Aoki, Adv. Compos. Mater. 19, 363 (2010)
M. Elchalakani, Thin-Walled Struct. 77, 86 (2014)
I.M. May, M. Roy, C. Lang, R.A. Khan, Proc. Inst. Civ. Eng. Struct. Build. 169, 141 (2016)
T. Sharples, Aeronaut. J. 84, 177 (1980)
C. Soutis, Prog. Aeosp. Sci. 41, 143 (2005)
J. Takahashi, K. Uzawa, I. Ohsawa, N. Matsutsuka, A. Kitano, K. Nagata, Applicability of recycled CFRP to secondary parts of automobile, in Proceedings of the Twelfth U.S.-Japan Conference on Composite Materials (Destech Publications, Inc, Lancaster, 2006)
I. Taketa, K. Yamaguchi, E. Wadahara, M. Yamasaki, T. Sekido, A. Kitano, The CFRP automobile body project in Japan, in Proceedings of the Twelfth U.S.-Japan Conference on Composite Materials (Destech Publications, Inc, Lancaster, 2006)
G. Williams, R. Trask, I. Bond, Compos. Pt. A Appl. Sci. Manuf. 38, 1525 (2007)
V.A. Katkar, G. Gunasekaran, Corrosion 72, 400 (2016)
M. Mandel, L. Kruger, Materialwiss. Werkstofftech. 45, 1123 (2014)
Z. Peng, X. Nie, Surf. Coat. Technol. 215, 85 (2013)
B.P. Cai, Y.H. Liu, C.K. Ren, Z.K. Liu, X.J. Tian, A.B.B. Abulimiti, Corros. Eng. Sci. Technol. 47, 289 (2012)
Y. Pan, G. Wu, X. Cheng, Z. Zhang, M. Li, S. Ji, Z. Huang, Corros. Sci. 98, 672 (2015)
A.A. Torres-Acosta, J. Compos. Constr. 6, 112 (2002)
A.A. Torres-Acosta, J. Compos. Constr. 6, 116 (2002)
M. Dawood, S. Rizkalla, E. Sumner, J. Compos. Constr. 11, 659 (2007)
W.C. Tucker, J. Energy Resour. Technol. (United States) 113, 264 (1991)
C.H. Hare, J. Prot. Coat. Linings 14, 74 (1997)
M.A. Rodríguez, JOM 66, 503 (2014)
M. Mandel, L. Krüger, Corros. Sci. 73, 172 (2013)
L. Arronche, K. Gordon, D. Ryu, V.L. Saponara, L. Cheng, J. Mater. Sci. 48, 1315 (2013)
I.A. Wootton, L.K. Spainhour, N. Yazdani, J. Compos. Constr. 7, 339 (2003)
T.E. Maaddawy, K. Soudki, J. Compos. Constr. 9, 187 (2005)
Y. Mueller, R. Tognini, J. Mayer, S. Virtanen, J. Biomed. Mater. Res. Part A 82, 936 (2007)
H.C. Hwang, Am. J. Physiol. Regul. Integr. Comp. Physiol. 25, 79 (1975)
M.D. Danford, R.H. Higgins, NASA Tech Briefs (ISSN 0145-319X), 12, 1, p. 64 (1988)
M. Schneider, K. Kremmer, C. Lämmel, K. Sempf, M. Herrmann, Corros. Sci. 80, 191 (2014)
G.L. Song, Corros. Sci. 52, 455 (2010)
G. Song, B. Johannesson, S. Hapugoda, D. Stjohn, Corros. Sci. 46, 955 (2004)
D.B. Huang, J.Y. Hu, G.L. Song, X.P. Guo, Corros. Eng. Sci. Technol. 48, 155 (2013)
Acknowledgements
This work was supported by GM R&D Center.
Author information
Authors and Affiliations
Corresponding author
Additional information
Available online at http://link.springer.com/journal/40195
Rights and permissions
About this article
Cite this article
Zhang, C., Zheng, DJ. & Song, GL. Galvanic Effect Between Galvanized Steel and Carbon Fiber Reinforced Polymers. Acta Metall. Sin. (Engl. Lett.) 30, 342–351 (2017). https://doi.org/10.1007/s40195-017-0539-x
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-017-0539-x