Modelling soil compaction of agricultural soils using fuzzy logic approach and adaptive neuro-fuzzy inference system (ANFIS) approaches

Abstract

One of the most important physical properties of the soil is its mechanical strength. Increasing soil mechanical strength will lead to increments in the draft, fuel consumption, work duration and equipment wear, but will follow the reduction in the root growth. Awareness of the soil cone index (as a criterion of the arable soil compaction) in order to production management in connection with the soil physical properties have high importance, especially in precision farming. On the other hand, finding the methods and models that be able to create the best function or model to estimate the soil cone index at the least cost and use of available data are crucial for researchers. The aim of this study was predicting arable soils cone index values by effective parameters on the soil cone index, including bulk density, soil moisture content and soil electrical conductivity by using Fuzzy and neuro-fuzzy systems. In this study, for measurement and determination of the influencing factors on the soil cone index value, the experimental design was the factorial experiment based on a randomized complete block design with five replications. The experimental field had three types of loam, sandy loam and loamy sand soils. The modeling of soil cone index was performed by using effective parameters such as bulk density, moisture content and soil electrical conductivity in the fuzzy and adaptive neuro-fuzzy inference system (ANFIS) systems. For fuzzification of input and output parameters, the linguistic variables, including very low (VL), low (L), medium (M), high (H) and very high (VH) were used. Since determining the type and number of membership functions was conducted experimentally, the triangular membership function for both input and output variables was used due to the high accuracy and convenience in system design. In ANFIS model, 80% and 20% of total data were considered as training and test data, respectively. The numbers of membership functions were selected 5 for each input parameters. ANFIS training was done by the hybrid method. The average of coefficients of determination (R²) were obtained 80.1% and 97.9% for the fuzzy and ANFIS models, respectively. The obtained model through ANFIS presented the high accuracy of 2.54% rather than the fuzzy models with the accuracy of 9.68%. Also in comparison with regression models, ANFIS model has high accuracy and can be used to estimate the soil cone index in agricultural land.