Abstract
Numerical simulation is a very important method for understanding the behaviors of insect flight. In this study, a method of building a finite element model is proposed on the basis of a real beetle wing, which is 50 mm long in the spanwise direction and 20 mm long in the chordwise direction. We scanned a real beetle wing using a scanner to get the 2D image. The scanned 2D image was used to produce CAD data of the outer lines of the membranes and veins. Then the lines were used to build the finite element model. The model was divided into 48 regions so that the variation in the thickness of the membranes and veins could be taken into account. The effect of the cross section of the veins on the exactness of the finite element model was investigated. The finite element model was used to simulate the bending test of a real beetle wing, and the analysis results are in agreement with the experimental results.
Similar content being viewed by others
References
Dickinson M H, Lehmann F O, Sane S P. Wing rotation and the aerodynamic basis of insect flight. Science, 1999, 248, 1954–1960.
Sudhakar Y, Vengadesan S. Flight force production by flapping insect wing in inclined stroke plane kinematics. Computers & Fluids, 2010, 39, 638–695.
Le T Q, Byun D Y, Saputra S, Ko J H, Park H C, Kim M J. Numerical investigation of the aerodynamic characteristics of a hovering coleopteran insect. Journal of Theoretical Biology, 2010, 266, 485–495.
Le T Q, Ko J H, Byun D Y, Park S H, Park H C. Effect of chord flexure on aerodynamic performance of a flapping wing. Journal of Bionic Engineering, 2010, 7, 87–94.
Haas F, Gorb S, Blickhan R. The function of resilin in beetle wings. Proceedings of Royal Society B, 2000, 267, 1375–1381.
Jin T L, Goo N S, Woo S C, Park H C. Use of a digital image correlation technique for measuring the material properties of beetle wing. Journal of Bionic Engineering, 2009, 6, 224–231.
Muhammad A, Park H C, Hwang D Y, Byun D Y, Goo N S. Mimicking unfolding motion of a beetle hind wing. Chinese Science Bulletin, 2009, 54, 2416–424.
Wootton R J, Evans K E, Herbert R C, Smith C W. The hind wing of the desert locust (Schistocerca gregaria Forskal). I. Functional morphology and mode of operation. Experimental Biology, 2000, 203, 2921–2931.
Herbert R C, Young P G, Smith C W, Wootton R J, Evans K E. The hind wing of the desert locust (Schistocerca gregaria Forskal). III. A finite element analysis of a deployable structure. Experimental Biology, 2000, 203, 2945–2955.
Combes S A, Daniel T L. Flexural stiffness in insect wings I. Scaling and the influence of wing venation. Experimental Biology, 2003, 206, 2979–2987.
Combes S A, Daniel T L. Flexural stiffness in insect wings II. Spatial distribution and dynamic wing bending. Experimental Biology, 2003, 206, 2989–2997.
Jin T L, Goo N S, Park H C. Anisotropy and nonhomogeneity of beetle wing membrane. Experimental Biology, 2010. (under review)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jin, T., Goo, N.S. & Park, H.C. Finite Element Modeling of a Beetle Wing. J Bionic Eng 7 (Suppl 4), S145–S149 (2010). https://doi.org/10.1016/S1672-6529(09)60228-6
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1672-6529(09)60228-6