Engineering property comparisons of 7050-T73651, 7010-T7651 and 7010-T73651 aluminium alloy plate
References (26)
- et al.
Some engineering property comparisons for 7050 and AZ74.61 die forgings
Engng Fracture Mech.
(1979) - J. T. Staley, Investigation to develop a high strength stress corrosion resistant naval aircraft aluminum alloy. Final...
Further development of aluminium alloy X7050
Stress corrosion cracking in aluminum alloys
Metals Engng Quart.
(1973)Ageing kinetics of aluminum-alloy 7050
Metallurgical Trans.
(1974)Evaluating new aluminum forging alloys
Metals Engng Quarterly
(1974)Aluminum alloy and process developments for aerospace
Metals Engng Quarterly
(1976)Alcoa Green Letter Alloy 7050
(1976)- et al.
Development of a tough, high-strength aluminium alloy with improved stress corrosion resistance
Aluminium, 50 Jahrg.
(1974) New high strength aluminium alloy
Aircraft Engng, Mater. Tech.
(1975)
Presentation of properties of a new high strength, aluminium alloy designated 7010
Engineering properties of the recently developed aluminium alloy designated 7010
NLR TR 79017
(Feb. 1979 1979)
Cited by (9)
The effect of pouring temperature and surface angle of vortex casting on microstructural changes and mechanical properties of 7050Al-3 wt% SiC composite
2018, Materials Science and Engineering: ACitation Excerpt :The composition of this alloy usually consists of 5.7–6.7% Zn, 1.9–2.6% Mg, 2.0–2.6% Cu and less than 0.5% Si, Fe, Mn, Ti, Cr etc combined. Of the most common derivatives of this alloy that is produced through retrogression or tempering are 7050-T73651, 7050-T651, 7050-T6, 7050 T74 and 7050-O [8–10]. Vortex casting was recently proposed as a proper technique to produce metal matrix composite [11,12].
The effect of coarse second phase particles on fatigue crack propagation of an AlZnMgCu alloy
1994, Scripta Metallurgica et MaterialaEffect of aging on the fatigue crack growth kinetics of an Al-Zn-Mg-Cu alloy in two directions
1994, Scripta Metallurgica et MaterialaFlight simulation fatigue crack growth testing of aluminium alloys. Specific issues and guidelines
1994, International Journal of FatigueResistance to stress corrosion cracking of high-strength 7xxx series aluminum alloys in 3.5% NaCl solution
2018, Journal of Korean Institute of Metals and MaterialsThe shock and spall response of AA 7010-T7651
2014, Journal of Physics: Conference Series
Copyright © 1983 Published by Elsevier Ltd.