The incorporation of work hardening and redundant work in rod-drawing analyses
References (25)
J. Mech. Phys. Solids
(1955)J. Iron Steel Inst.
(1948)Metall. Rev.
(1958)- et al.
J. Iron Steel Inst.
(1948) J. Inst. Metals
(1957–1958)Z. angew. Math. Mech.
(1927)- et al.
Mitt. K.-Wilhelm-Inst. Eisenforsch, Düsseld.
(1940) - et al.
J. appl. Mech.
(1944) - et al.
J. Inst. Metals
(1950–1951)
J. Inst. Metals
(1948)
Cited by (28)
Fracture behavior of twinning-induced plasticity steel during wire drawing
2020, Journal of Materials Research and TechnologyCitation Excerpt :However, the effective strain profiles were significantly different with RA per pass: the HR wire had better uniformity along the radial direction. This is in good agreement with previous studies [9,31]. Regardless of the pass schedule, the center area had the same effective strain theoretically calculated based on the nominal area reduction using Eq. (2), i.e., 0.26.
Microstructural evolution and deformation behavior of twinning-induced plasticity (TWIP) steel during wire drawing
2015, Materials Science and Engineering: AConical pipe envelope formation process
2003, Journal of Materials Processing TechnologyA computational study of strain inhomogeneity in wire drawing
1995, International Journal of Machine Tools and ManufactureOn cropping and related processes
1980, International Journal of Mechanical SciencesGeometry factors and inhomogeneity of flow in rotary piercing and cold drawing of seamless tubing
1979, International Journal of Mechanical Sciences
Copyright © 1968 Published by Elsevier Ltd.