D.C. electrical properties of vacuum-deposited CdTe films

doi:10.1016/0040-6090(82)90004-9

Thin Solid Films

Volume 92, Issue 3, 18 June 1982, Pages 227-230

https://doi.org/10.1016/0040-6090(82)90004-9 Get rights and content

Abstract

The current-voltage characteristics of vacuum-deposited CdTe films were studied as a function of film thickness (2500–13000 Å) at various temperatures (0–110°C). The d.c. conduction mechanism was explained using a modified Poole-Frenkel equation.

References (12)

R.M. Hill
Thin Solid Films
(1971)
B. Goldstein et al.
J. Appl. Phys.
(1959)
M. Kamiyama et al.
Jpn. J. Appl. Phys.
(1962)
H.R. Johnson et al.
J. Phys. D
(1975)
J.J. Loferski
J. Appl. Phys.
(1956)
S.S. Devlin
Physics and Chemistry of II-VI Compounds

There are more references available in the full text version of this article.

Cited by (42)

Investigating optical, structural and morphological properties of polycrystalline CdTe thin-film deposited by RF magnetron sputtering
2021, Materials Letters: X
In this work, optimization of the physical properties of cadmium telluride (CdTe) thin films has been carried out to improve its performance by the influence of RF power. CdTe Nanocrystalline thin films were characterized by using various techniques such as atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), and X-ray diffraction (XRD). XRD study revealed that CdTe films are polycrystalline and have preferential growth in (1 1 1) direction. FESEM images showed a continuous and dense morphology of CdTe films on glass substrates. The AFM result shows that the surface roughness of films increases with annealing. Optical properties were investigated with the help of the UV–visible absorption spectrum which showed that the bandgap decreases with an increase in Radio-frequency power. Further, density functional theory (DFT) calculations showed that the optimum bandgap i.e. 1.57 eV for CdTe films deposited at 100 W RF power with 2% N₂ is in good agreement with the experimental result. This study showed that CdTe films deposited at 100 W RF power with 2% N₂ can be used as an excellent absorbing material for the application of optoelectronic devices solar cells.
Electrical conduction mechanisms of CdTe quantum dots/p-si heterojunction
2015, Materials Science in Semiconductor Processing
Citation Excerpt :
Additionally, it is seen that both traps types belong to the space charge limited conduction can be presented but each one becomes a dominant in a certain voltage range [14]. Investigations of the conduction mechanisms of CdTe device also show a field lowering conductivity of the Poole-Frenkel type [15,16]. Several studies on evaporated nano-particles are found to maintain their structural properties [5,17].
CdTe quantum dots (QDs) are prepared on p-Si substrates using thermal evaporation technique. Current–voltage (I–V) characteristics of Au/CdTe QDs/p-Si/Al heterojunction are measured in a temperature range 304–368 K. The results show that the device has a rectification behavior with a rectification ratio being 275 at ±1.5 V. We determine the electrical conduction mechanisms of the heterojunction. At forward voltages V<0.3 V, the thermionic emission becomes the main mechanism, where in this voltage range, it is possible to estimate the barrier height and the ideality factor. At a forward voltage range 0.5<V<0.9 V, the conduction mechanism turns into the space charge limited conduction which is dominated by an exponential trap distribution (TSCLC). Within this voltage range 0.5<V <0.9, the total density of the trap states is calculated. At forward voltages 0.95<V<1.5 V, Poole-Frenkel conduction mechanism fits well with the experimental data. It is found that there are two trap levels with zero fields of the activation energy which have values 0.16 and 0.46 eV. At the reverse applied voltages, it is also found that the main source of the reverse current is the generation-recombination through p-Si rather than through the interface of the thin film itself.
Thermal annealing effect on the structural and the optical properties of Nano CdTe films
2015, Optik
Citation Excerpt :
The properties of CdTe films are very sensitive to preparation conditions where many preparation techniques such as vacuum deposition [7–9], electro deposition [10], molecular beam epitaxial [11], metal–organic chemical vapor deposition [12], closed-space sublimation [13] and screen-printing [14,15] were employed to prepare CdTe films. Many articles studied the different properties of CdTe films [15–26] but many others are needed for more understanding. In this study, the effect of annealing on the structural and optical properties of CdTe films deposited on glass substrate have been studied and the obtained results are discussed.
Structural and optical properties of as-prepared and annealed thermal evaporated CdTe films were investigated. The annealing temperature (373–523 K) affects both structural and optical parameters. Polycrystalline nature with preferred (1 1 1), (2 0 0) and (2 2 0) orientations was released, the corresponding two theta is 23.15°, 27.42° and 40.26° respectively. Structural parameters as dislocation density, inter-planer distance, the number of crystallites per unit surface area, lattice constant, crystallite size and strain could be determined as a function of annealing. The results confirm the films nanostructure property. The optical gap, refractive index, dielectric constant and optical conductivity increase as a function of annealing. These effects were attributed to the nano structural property and the partial reduction of the defect density.
Effect of sulfur additive on density of localized states in nanostructures chalcogenide Se<inf>95-x</inf>S<inf>x</inf>Zn<inf>5</inf> thin films
2013, Journal of Physics and Chemistry of Solids
Citation Excerpt :
Therefore, (Se–S–Zn) is of great interest as a model material in such form as thin film, quantum wells and bulk crystals [10]. Due to the number of practical applications in the field of optoelectronics and electro-optics, a great deal of interest has been shown in the study of the dielectric and conduction behavior of various semiconducting materials [11–16]. However, most of the experimental work carried out so far for (Se–S–Zn) relates to various conduction mechanisms, which only provides information about the nature of transport processes.
This paper reports the measurement of space charge limited conduction (SCLC) on the fabricated thin films of Se_95−xS_xZn₅ (0.2≤x≤10) in temperature range 313–353 K for the first time. At high electric fields (E∼10⁴ V/cm), the current could be fitted into the theory of space charge limited conduction, in case of uniform distribution of localized states in mobility gap. The homogeneity and surface morphology of thin films were assessed by scanning electron microscopy. The crystalline nature of the thin films was confirmed by powder XRD and the crystallite size was calculated using Scherer's formula. The crystallite size and density of localized states were found to increase with the increase of sulfur concentration. DC conductivity and activation energy were calculated and found to decrease and increase respectively, with the increase of sulfur concentration.
Controlled growth of CdTe films by periodic voltammetry for solar cell applications
2009, Electrochimica Acta
In the present investigation, polycrystalline n-CdTe films have been synthesized on SnO₂-coated glass substrate employing voltammetric technique under periodic cycles. Optical properties of the CdTe films were investigated and the band gap energy was found to lie within the range of 1.32–1.40 eV depending on the composition of the film matrix, as obtained by EDAX analysis. The films were subjected to SEM and AFM analyses in order to study the surface morphology, topographic structure of the semiconductor surface. X-ray diffraction studies indicated polycrystalline nature of deposits containing hexagonal and cubic phases of CdTe. The stability of the films was determined through anodic polarization studies using Tafel analysis. The amount of Cd²⁺ dissolved during polarization was estimated by anodic stripping voltammetry. The Nyquist and Mott-Schottky plots derived from impedance spectroscopic measurements provided important information regarding electrical and semiconducting properties of the films. Cyclic voltammetry was found to be an effective method for developing potential thin films of CdTe, demonstrating photo-conversion efficiency up to the order of ∼4%.
Electrical conduction in zinc phosphide thin films
2007, Materials Characterization
Zinc Phosphide (Zn₃P₂) films were deposited by vacuum evaporation under a pressure of 1.3 × 10^− 5 m bar onto well-cleaned glass substrates. I–V measurements show Ohmic and non-ohmic behavior for lower and higher fields, respectively. The field-lowering coefficient was calculated theoretically and experimentally and it was found that the possible conduction mechanism in these films is Richardson–Schottky type. The activation energy decreases as the voltage increases. The zero-field activation energy was found to be 0.97 eV and this zero field activation energy decreases with an increase in film thickness. The capacitance measurements were made at room temperature. The flat band potential was found to be ∼ 1.5 V. The ionized charge density and the total number of interface states were calculated and the values were found to be 5.30 × 10¹⁶/cm³ and 4.18 × 10¹⁷ cm^− 2 eV^− 1 respectively.

View all citing articles on Scopus

^∗: Present address: Department of Physics, Science College, Jorhat, Assam, India.

View full text

D.C. electrical properties of vacuum-deposited CdTe films

Abstract

Thin Solid Films

J. Appl. Phys.

Jpn. J. Appl. Phys.

J. Phys. D

J. Appl. Phys.

Physics and Chemistry of II-VI Compounds