Gravitational stresses in long symmetric ridges and valleys in anisotropic rock

https://doi.org/10.1016/0148-9062(94)90899-0Get rights and content

Abstract

The effect of topography and rock mass anisotropy on gravitational stresses in long isolated symmetric ridges and valleys is modeled using an analytical method proposed earlier by the first two authors. The rock mass deforms under a condition of plane strain. A parametric study is presented on the effect of (1) topography, (2) orientation of anisotropy and (3) degree of anisotropy on the magnitude and distribution of gravitational stresses in transversely isotropic rock masses with planes of anisotropy striking parallel to the ridge or valley axis. It is found that compressive stresses develop near ridge crests and that tensile stresses develop in valley bottoms and valley walls. The magnitude of the gravitational stresses is of the order of the characteristics stress ϱgβbβ where ϱ is the rock density, g is the gravitational acceleration and βbβ is the height of the ridge or depth of the valley.

References (23)

  • Z.G. Ter-Martirosyan et al.

    The stressed state of rock masses in a field body forces

  • Cited by (37)

    • Paleostress and fluid-pressure regimes inferred from the orientations of Hishikari low sulfidation epithermal gold veins in southern Japan

      2018, Journal of Structural Geology
      Citation Excerpt :

      The paleo-depth of vein formation was comparable with the amplitude of paleo topographic undulations. Topographic loading affects stress condition down to the depth comparable to the amplitude (Pan et al., 1994). The topographic perturbation explains the difference in the stress conditions found in the Honko-Sanjin and Yamada sub-deposits, which accumulated more or less simultaneously.

    • Improvements to field and remote sensing methods for mapping discontinuity persistence and intact rock bridges in rock slopes

      2016, Engineering Geology
      Citation Excerpt :

      Natural slopes and engineered open pit mine slopes are both subject to brittle rock mass damage, resulting from progressive fracturing which degrades rock mass strength. Damage can occur slowly from endogenous natural processes within the rock mass (Gerber and Scheidegger, 1969) such as tectonic action (Brideau et al., 2005), which can interact with topography to alter in situ stress and promote rock fracturing (Miller and Dunne, 1996; Pan et al., 1994). Exogenous processes such as glacial loading and subsequent debuttressing after glacial retreat can also promote fracturing (Ziegler, 2014; Leith, 2012).

    • Near-surface rock stress orientations in alpine topography derived from exfoliation fracture surface markings and 3D numerical modelling

      2016, International Journal of Rock Mechanics and Mining Sciences
      Citation Excerpt :

      No fit between modelled and measured σ1 orientations was obtained with the isotropic strain model (39%<45°; see black bars in Fig. 13C). The development of tensile stresses in parts of main valley bottoms of our models are consistent with results obtained from two-dimensional analytical and numerical models omitting or neglecting active tectonics or remnant stresses35,75,76). Compressive stresses in the valley floor west of Kessiturm may be attributed to its considerably higher elevation compared to the NNW-SSE oriented, deeper valley south of Grimsel Pass.

    • 3D topographic stress perturbations and implications for ground control in underground coal mines

      2014, International Journal of Rock Mechanics and Mining Sciences
    View all citing articles on Scopus
    View full text