Methanol from atmospheric carbon dioxide: A liquid zero emission fuel for the future

doi:10.1016/0196-8904(95)00345-2

Energy Conversion and Management

Volume 37, Issues 6–8, June–August 1996, Pages 1351-1356

https://doi.org/10.1016/0196-8904(95)00345-2 Get rights and content

Abstract

Methanol is a promising liquid energy carrier for the storage of renewable energy. The comparison with hydrogen shows a lower total energy efficiency for methanol. But methanol is easy to handle within the existing transport and storage capacities of the petrol industry. Therefore it causes low investment costs for the infrastructure of a global renewable energy network. For the storage of small amounts of energy like in individual traffic and for the distribution of energy in low populated regions methanol is even the most efficient alternative. Beside hydrogen, a basic component for the synthesis of methanol is CO₂. The recovery of CO₂ from atmosphere will avoid an infrastructure for CO₂-transport to the place where methanol is generated. With solar energy as the energy source a lower energy demand for the recovery of CO₂ from atmosphere than from combustion fluegases can be achieved. An integration of biomass as basic product for the synthesis of methanol improves the conversion efficiency from solar energy to methanol.

References (12)

Enquete-Kommission
Schuts der Erdatmosphaere
H. Bossel
Umweltwissen
(1990)
D. Povh et al.
C.J. Winter et al.
Wasserstoff als Energietraeger
(1989)
BMFT
Forschungsbericht T 84-032
(1984)
W. Peschka
Fluessiger Wasserstoff als Energietraeger
(1984)

There are more references available in the full text version of this article.

Cited by (79)

The role of alternative and renewable liquid fuels in environmentally sustainable transport
2022, Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation
Renewable liquid fuels provide an opportunity for nations to increase energy independency or reduce greenhouse gas emissions by supplying energy-dense fuels which are miscible with petroleum gasoline and diesel. This chapter shows how liquid fuels are the most pragmatic way to increase the renewable energy content in the transport sector, enabling an evolution, rather than a revolution, of both vehicle and fuel technology. The historical development and present market penetration of these fuels is discussed, together with aspects of current and future legislation which may incentivize or limit their use. An integrated system is proposed, which combines biomass with fuels made from recycled CO₂ as a means of storing off-peak renewable energy.
Electrochemical reduction of CO<inf>2</inf> to CO in organic electrolyte with HCl oxidized to Cl<inf>2</inf> on anode for phosgene synthesis
2021, Electrochimica Acta
Phosgene is an important feedstock in chemical industry. It can be used as an acylating agent to produce numerous high-value chemicals. In this work, we have constructed a novel membrane electrolysis cell for CO₂ reduction to CO in organic electrolyte, with HCl oxidized to Cl₂ on the anode in aqueous solution. The obtained CO and Cl₂ can be used as feedstock to produce phosgene. Through this route, CO₂ can be converted to high-value products, and meanwhile, chlorine can be recovered from HCl-containing industrial waste gasses. Based on our experimental results, CO₂ can be efficiently reduced to CO, and HCl can be efficiently oxidized to Cl₂. Our designed electrolyzer has a promising utilization perspective in phosgene chemical industry.
Understanding the antagonistic effect of methanol as a component in surrogate fuel models: A case study of methanol/n-heptane mixtures
2021, Combustion and Flame
Citation Excerpt :
Fossil fuels are the primary energy source for the ever-growing transportation sector, and their consumption has led to an increasing demand on energy supplies and has raised concerns about harmful CO2 emissions. As a clean-burning renewable fuel [1], methanol has been widely used in internal combustion engines both as a neat fuel, in blends, and as an additive because of its tendency to lower soot and NOx emissions [2]. Engine studies [3–5] have explored the effect of methanol addition on exhaust emissions and the auto-ignition characteristics of fuels.
Methanol is a widely used engine fuel, blend component, and additive. However, no systematic auto-ignition data or laminar flame speed measurements are available for kinetic studies of the effect of methanol as a blending or additive component. In this work, both ignition delay times and laminar flame speeds of pure methanol, n-heptane and their blends at various blending ratios were measured at engine-relevant conditions. Results show that increasing methanol in a blend promotes reactivity at high temperatures and inhibits it at low temperatures, with the crossover temperature occurring at approximately 970–980 K with it being almost independent of pressure. The experimental data measured in this work, together with those in the literature are used to validate NUIGMech1.1, which predicts well the experimental ignition delay times and laminar flame speeds of the pure fuels and their blends over a wide range of conditions. Furthermore, kinetic analyses were conducted to reveal the effects of methanol addition on the oxidation pathways of n-heptane and the dominant reactions determining the fuel reactivities. It is found that competition for ȮH radicals between methanol and n-heptane plays an important role in the auto-ignition of the fuel blends at low temperatures. At high temperatures, methanol produces higher concentrations of HȮ₂ radicals which produce two ȮH radicals either through the production of H₂O₂ and its subsequent decomposition or through direct reaction with Ḣ atoms. This promotes the high temperature reactivity of methanol/n-heptane mixtures for ignition delay times and laminar flame speeds, respectively.
A Review of Non-Thermal Plasma Technology: A novel solution for CO<inf>2</inf> conversion and utilization
2021, Renewable and Sustainable Energy Reviews
Citation Excerpt :
These include CO2 capture, electrolysis of CO2 and H2O, and fuel synthesis [252]. The electrolysis of CO2 and H2O has been carried out in solid oxide cells to produce syngas [268–272]. However, the process had the disadvantage of producing CO2 and O2 together in the anode compartment of the electrolysis cell, thus, there was a need for subsequent gas-phase separation [273,274].
Increasing attention has been drawn to carbon dioxide (CO₂) conversion into higher-value platform chemicals and synthetic fuels due to global warming. These reactions require a large amount of thermal energy in order to proceed, which is ascribable to the high stability of the bonds in CO₂. Non-thermal plasma (NTP)-catalytic CO₂ conversion has emerged as a promising method to significantly reduce the reaction temperature as plasma can activate CO₂ at as low as room temperature and atmosphere pressure. However, this technology requires a paradigm shift in process design to enhance plasma-catalytic performance. CO₂ conversion using plasma-catalysis has great potential to increase reaction efficiencies due to the synergetic effects between the plasma and catalysts. It is crucial to present the recent progress in CO₂ conversion and utilization whilst providing a research prospects framework and direction for future research in both industries and laboratories. Herein, a comprehensive review of recent, encouraging research achievements in CO₂ conversion using NTP is provided. The topics reviewed in this work are: i) the recent progress in different NTP sources in relation to product selectivity, conversion, and energy efficiency; ii) plasma-based CO₂ reactions and applications; iii) CO₂ conversion integrated with CO₂ capture; and iv) current challenges and future perspectives. The high market value of the possible products from this process, including chemicals and fuels, make commercialization of the process feasible. Furthermore, the selectivities of these products can be further improved by developing suitable catalysts with effective sensitivities and performances under the intricate conditions needed to make these products. There is an urgent need for further studies to be performed in this emerging field.
Weaknesses and drivers for power-to-X diffusion in Europe. Insights from technological innovation system analysis
2019, International Journal of Hydrogen Energy
Tackling climate change requires to decarbonize all energy applications. To that end, producing hydrogen from low-carbon electricity and water by means of water electrolysis is garnering increasing attention. Hydrogen can indeed be used directly or further synthetized into chemical compounds that replace fossil fuels, hence providing a solution to address energy applications ill-suited for direct electrification. This concept, coined as power-to-X (PtX), remains yet in a formative phase characterized by high uncertainty. This paper takes on a technological innovation system (TIS) approach to examining the development of PtX in Europe. TIS surmises that technology diffusion is influenced by the structures of the socio-technical system it is part of and by how the latter functions. The case study engages TIS with the complexity of multi-sectoral, multi-purpose technology and explores the incorporation of social network analysis to scrutinize application configuration. The paper finds that the European PtX-TIS is growing and shows early signs of system building motor of innovation. However, the analysis also suggests that the lack of market formation and the underlying conflicts of interest across its wide actors’ basis might jeopardize its future development.
Methanol as a fuel for internal combustion engines
2019, Progress in Energy and Combustion Science
Transportation of people and goods largely relies on the use of fossil hydrocarbons, contributing to global warming and problems with local air quality. There are a number of alternatives to fossil fuels that can avoid a net carbon emission and can also decrease pollutant emissions. However, many have significant difficulty in competing with fossil fuels due to either limited availability, limited energy density, high cost, or a combination of these.
Methanol (CH₃OH) is one of these alternatives, which was demonstrated in large fleet trials during the 1980s and 1990s, and is currently again being introduced in various places and applications. It can be produced from fossil fuels, but also from biomass and from renewable energy sources in carbon capture and utilization schemes. It can be used in pure form or as a blend component, in internal combustion engines (ICEs) or in direct methanol fuel cells (DMFCs). These features added to the fact it is a liquid fuel, making it an efficient way of storing and distributing energy, make it stand out as one of the most attractive scalable alternatives.
This review focuses on the use of methanol as a pure fuel or blend component for ICEs. First, we introduce methanol historically, briefly introduce the various methods for its production, and summarize health and safety of using methanol as a fuel. Then, we focus on its use as a fuel for ICEs. The current data on the physical and chemical properties relevant for ICEs are reviewed, highlighting the differences with fuels such as ethanol and gasoline. These are then related to the research reported on the behaviour of methanol and methanol blends in spark ignition and compression ignition engines. Many of the properties of methanol that are significantly different from those of for example gasoline (such as its high heat of vaporization) lead to advantages as well as challenges. Both are extensively discussed.
Methanol’s performance, in terms of power output, peak and part load efficiency, and emissions formation is summarized, for so-called flex-fuel engines as well as for dedicated engines. We also briefly touch upon engine hardware changes and material compatibility. Methanol fuel reforming using engine waste heat is discussed, as a potential route towards further increases in efficiency and decreases in emissions. Next to the experimental work, research efforts into modelling the behaviour of methanol as a fuel are also reviewed, including mixture formation, normal and abnormal combustion. Methanol’s properties such as high latent heat, fast burning velocity, high knock-resistance and no carbon-to-carbon bonds are shown to leverage engine technology developments such as increased compression ratios, downsizing and dilution; enabling much increased engine efficiencies.
Finally, we point out the current gaps in knowledge to indicate which areas future research should be directed at.

View all citing articles on Scopus

View full text

Methanol from atmospheric carbon dioxide: A liquid zero emission fuel for the future

Abstract

Schuts der Erdatmosphaere

Umweltwissen

Wasserstoff als Energietraeger

Forschungsbericht T 84-032

Fluessiger Wasserstoff als Energietraeger