Elsevier

CIRP Annals

Volume 53, Issue 2, 2004, Pages 511-537
CIRP Annals

Dry Machining and Minimum Quantity Lubrication

https://doi.org/10.1016/S0007-8506(07)60027-4Get rights and content

Abstract

Modern machining processes face continuous cost pressures and high quality expectations. To remain competitive a company must continually identify cost reduction opportunities in production, exploit economic opportunities, and continuously improve production processes. A key technology that represents cost saving opportunities related to cooling lubrication, and simultaneously improves the overall performance of cutting operations, is dry machining. The elimination of, or significant reduction in, cooling lubricants affects all components of a production system. A detailed analysis and adaptation of cutting parameters, cutting tools, machine tools and the production environment is mandatory to ensure an efficient process and successfully enable dry machining.

REFERENCES (157)

  • D. Axinte et al.

    Reliable Tool Life Measurements in Turning

    International Journal on Machine Tools and Manufacturing

    (2001)
  • S. Suda et al.

    A Synthetic Ester as an Optimal Cutting Fluid for Minimal Quantity Lubrication Machining

    Annals of the CIRP

    (2002)
  • G. Byrne et al.

    Advancing Cutting Technology

    Annals of the CIRP

    (2003)
  • P. Ettmayer et al.

    Ti(C,N) Cermets - Metallurgy and Properties

    International Journal of Refractory Metals and Hard Materials

    (1995)
  • H.K. Tönshoff et al.

    CBN Grinding with Small Wheels

    Annals of the CIRP

    (1995)
  • T. Cselle et al.

    Today's Application and Future Development of Coatings for Drills and Rotating Cutting Tools, Surface & Coating Technology

    Proc. of the 22nd International Conference

    (1995)
  • F. Klocke et al.

    Coated Tools for Metal Cutting - Features and Applications

    Annals of the CIRP

    (1999)
  • C. Ducros et al.

    Deposition, Characterization and Machining Performance of Multilayer PVD Coatings on Cemented Carbide Cutting Tools

    Surface and Coatings Technology

    (2003)
  • F.M. Kustas et al.

    Nanocoatings on Cutting Tools for Dry Machining

    Annals of the CIRP

    (1997)
  • G. Erkens et al.

    Supernitrides: A Novel Generation of PVD Hardcoatings to meet the Requirements of High Demanding Cutting Applications

    Annals of the CIRP

    (2003)
  • V. Derflinger et al.

    New Hard/Lubricant Coating for Dry Machining

    Surface and Coatings Technology

    (1999)
  • D.U. Braga et al.

    Using a Minimum Quantity of Lubricant (MQL) and a Diamond Coated Tool in the Drilling of Aluminum-Silicon Alloys

    Journal of Materials Processing Technology

    (2002)
  • E. Uhlmann et al.

    Wear Behavior of CVD-Diamond Tools

    Annals of the CIRP

    (2002)
  • J.F. Kelly et al.

    Minimal Lubrication Machining of Aluminum Alloys

    Journal of Material Processing Technology

    (2002)
  • T. Smith et al.

    Theoretical Analysis of Cutting Fluid Interaction in Machining

    Tribology International

    (1988)
  • J.A. Williams et al.

    The Role of Lubricants in Machining

    Wear

    (1977)
  • T. Wakabayashi et al.

    The Action of Gaseous Lubricants in the Orthogonal Machining of an Aluminum Alloy by Titanium Nitride Coated Tools

    Surface and Coatings Technology

    (1993)
  • T. Wakabayashi et al.

    Tribological Characteristics and Cutting Performance of Lubricant Esters for Semi-Dry Machining

    Annals of the CIRP

    (2003)
  • A.E. Diniz et al.

    Cutting Conditions for Finish Turning Process - Aiming: The Use of Dry Cutting

    International Journal of Machine Tools and Manufacture

    (2002)
  • M. Rahman et al.

    Experimental Evaluation On The Effect of Minimal Quantities of Lubricant in Milling

    International Journal of Machine Tools and Manufacture

    (2002)
  • R. Schirsch et al.

    Wirtschaftlichkeit der Trockenbearbeitung, Trockenbearbeitung prismatischer Teile

    VDI-Berichte

    (1998)
  • K. Weinert et al.

    Was kostet die Kühlschmierung?

    Technica

    (1995)
  • Thamke, D., 1998, Technologische und okonomische Aspekte der Trocken- und Minimalmengenbearbeitung am Beispiel des...
  • H. Kissler

    KSS-bedingte Kosten in der spanenden Metallbearbeitung als Anreiz fur die Trockenbearbeitung, 12th International Colloquium Tribology 2000 - Plus

    Conference Proc.

    (2000)
  • Z. Chen et al.

    Cutting Fluid Aerosol Generation due to Spin-off in Turning Operation

    Symposium on Manufacturing Science and Engineering, Conference Proc. ASME

    (1999)
  • D.M. Hands et al.

    Comparison of Metalworking Fluid Mist Exposures from Machining with Different Levels of Machine Enclosure

    American Industrial Hygiene Association Journal

    (1996)
  • H.W. Rossmoore

    Microbiology of Metal-working Fluids: Deterioration, Disease, and Disposal

    Lubrication Engineering

    (1995)
  • R.B. Aronson

    Why Dry Machining?

    Manufacturing Engineering

    (1995)
  • F. Klocke et al.

    Mindermengenkühlschmierung - eine Alternative zur Nassberarbeitung?

    VDI-Berichte

    (1996)
  • Weinert, K., Biermann, D., Thamke, D., 1996, Möglichkeiten und Grenzen verschiedener Kühlschmierstoffkonzepte bei der...
  • K. Weinert

    Trockenbearbeitung und Minimalmengenkühlschmierung - Einsatz in der spanenden Fertigungstechnik

    (1999)
  • Daniel, C. M., Olson, W. W., Sutherland, J. W., 1997, Research Advances In Dry and Semi-dry Machining, SAE Technical...
  • Schulte, K., 2000, Stahlbearbeitung mit Wendeschneidplatten-Bohrern bei reduziertem Kuhlschmierstoff-Durchsatz,...
  • W. König

    Fertigungsverfahren I - Drehen, Frasen, Bohren

    (1999)
  • Klocke, F., Schulz, A., Gerschwiler, K., 1996, Saubere Fertigungstechnologien - Ein Wettbe-werbsvorteil von morgen?,...
  • Klocke, F., Gerschwiler, K., 2003, Minimalmengenschmierung - Systeme, Medien, Einsatzbeispiele und ökonomische Aspekte...
  • R. Lamers

    Nomen est omen - Kuhlt die Minimalmengen-Kuhlschmierung?

    Press Report

    (2001)
  • H. Chandrasekaran et al.

    Modelling Tool Stresses and Temperature Evaluation in Turning using FEM

    Machining Science and Technology

    (1998)
  • Eisenblatter, G., 2000, Trockenbohren mit Vollhartmetallwerkzeugen, PhD-thesis, RWTH Aachen,...
  • S. Suzuki

    Developments in Oil Supplying Systems for MQL Cutting

    Journal of Japanese Society of Tribologists

    (2002)
  • Cited by (0)

    View full text