Evaluation of the biological properties of soluble chitosan and chitosan microspheres

doi:10.1016/S0378-5173(96)04847-8

International Journal of Pharmaceutics

Volume 148, Issue 2, 28 March 1997, Pages 231-240

https://doi.org/10.1016/S0378-5173(96)04847-8 Get rights and content

Abstract

Chitosan is the N-deacetylated product of chitin, a naturally occurring polymer which has been used extensively to prepare microspheres for oral and intra-nasal delivery. The chitosan polymer has also been proposed as a soluble carrier for parenteral drug delivery. Here the in vitro biocompatibility of seven soluble chitosan polymers (different salts and a chitosan derivative; glycol chitosan, different molecular weights and varying degrees of deacetylation) and chitosan microspheres loaded with horseradish peroxidase (HRP), was systematically studied by evaluating Cytotoxicity towards B16F10 cells and ability to lyse rat erythrocytes. Cytotoxicity towards B16F10 was concentration-dependent and varied according to the salt used and polymer molecular weight. Chitosan hydrochloride was most toxic having an IC₅₀ of 0.21 ± 0.04 mg/ml, only fourfold less toxic than the cationic reference polymer: poly-L-lysine (IC₅₀ of 0.05 ± 0.01 mg/ml). The ranking of cytotoxicity was: chitosan hydrochloride > chitosan hydroglutamate > glycol chitosan > chitosan hydrolactate. Polymers of higher molecular weight of each type were most toxic. Glutaraldehyde-crosslinked chitosan microspheres were cytotoxic at all concentrations used. In the lysis assay, release of haemoglobin occurred on exposure to all soluble chitosans in a time-dependent manner. After 24 h, 100%, lysis was conferred by most soluble chitosans (1 μm/ml-3 mg/ml), and even after 1 h, chitosan hydroglutamate caused 60–80% lysis. Microspheres were considerably less lytic than the soluble polymer. Scanning electron microscopy showed changes in B16F10 and red cell morphology consistent with the observed chitosan toxicity. Whilst HRP entrapped in glutaraldehyde crosslinked chitosan microspheres retained enzyme activity, this was a reduced 10-fold compared to an equivalent amount of native HRP.

References (19)

T.J. Aspden et al.
Chitosan as a nasal delivery system: evaluation of insulin absorption enhancement and effect on nasal membrane integrity using rat models
Eur. J. Pharm. Sci.
(1996)
I. Henriksen et al.
Interactions between liposomes and chitosans
Int. J. Pharm.
(1994)
T. Imai et al.
Interaction of indomethacin with low molecular weight chitosan and improvement of some pharmaceutical properties of indomethacin by low molecular weight chitosan
Int. J. Pharm.
(1991)
J. Kristl et al.
Hydrocolloids and gels of chitosans as drug carriers
Int. J. Pharm.
(1993)
K.Y. Lee et al.
Blood biocompatibility and biodegradability of partially N-acylated chitosan derivatives
Biomaterials
(1995)
T. Alexakis et al.
Microencapsulation of DNA within alginate microspheres and crosslinked chitosan membranes for in vivo application
Appl. Biochem. Biotechnol.
(1995)
P.C Berscht et al.
In vitro evaluation of biocompatibility of different wound dressing materials
J. Mater. Sci. Med.
(1995)
B. Carreño-Gómez et al.
Evaluation of the biological properties of chitosan and chitosan microspheres
B. Carreño-Gómez et al.
Preparation and characterisation of chitosan microspheres by spray drying

There are more references available in the full text version of this article.

Cited by (312)

The fabrication of the chitosan-based bioink for in vitro tissue repair and regeneration: A review
2024, International Journal of Biological Macromolecules
The repair and regeneration of the injured tissues or organs is a major challenge for biomedicine, and the emerging 3D bioprinting technology as a class of promising techniques in biomedical research for the development of tissue engineering and regenerative medicine. Chitosan-based bioinks, as the natural biomaterials, are considered as ideal materials for 3D bioprinting to design and fabricate the various scaffold due to their unique dynamic reversibility and fantastic biological properties. Our review aims to provide an overview of chitosan-based bioinks for in vitro tissue repair and regeneration, starting from modification of chitosan that affect these bioprinting processes. In addition, we summarize the advances in chitosan-based bioinks used in the various 3D printing strategies. Moreover, the biomedical applications of chitosan-based bioinks are discussed, primarily centered on regenerative medicine and tissue modeling engineering. Finally, current challenges and future opportunities in this field are discussed. The combination of chitosan-based bioinks and 3D bioprinting will hold promise for developing novel biomedical scaffolds for tissue or organ repair and regeneration.
Edible chitosan-alginate based coatings enriched with turmeric and oregano additives: Formulation, antimicrobial and non-cytotoxic properties
2023, Food Chemistry
In our study we developed the edible chitosan and alginate coatings with turmeric or oregano additives. The objective of the research was to evaluate the dose-dependent cytotoxicity of films. In cell line studies on HepG2 and BJ cells, they were shown to be non-cytotoxic materials (IC50% was not reached). For HepG2 increase in cell proliferation was observed for 3, 4, and 7 mg/mL of OS3 (124,79±9,21; 162,4±10,46; 165,37±18,44) after 72 h. In BJ cells, no significant decrease in proliferation was noted after 24- and 48-hour exposure to OS0 and OS1 (1–7 mg/ml). The addition of oregano (1% v/v) resulted in films with higher elongation at break and 40% higher tensile strength compared to the base (OS0) film. Use of additives significantly increased the thermal stability of the complexes (by an average of 10 °C). Coatings were tested on tofu and had proven potent antimicrobial properties.
Immunomodulatory natural polysaccharides: An overview of the mechanisms involved
2023, European Polymer Journal
Maintenance of homeostasis is the primary function of the immune system. It detects the threats posed by pathogens, cancer, and tissue damage and mounts an immune response. The immunological memory dispensed by the immune system prevents or minimizes a second attack by the pathogen. Owing to the advent of new technologies, the comprehension of the immune system has widened, thus opening new horizons to modulate the immune system against any threat. Modulating the immune system with several biological and synthetic molecules mainly targets the innate and adaptive immune system to mount responses against several types of cancers, pathogenic infections, and autoimmune diseases. Polymers are widely used in several biological applications. The various characteristics of polymers, including molecular weight and tunable properties to modulate certain biological functions, have rendered them an ideal candidate for developing state-of-the-art therapeutic interventions. Extensive studies by various researchers across the globe have unraveled the potential of several synthetic and natural polymers to exhibit immunostimulatory activities. These polymers act as pattern recognition receptors (PRR) agonists to activate and engage the immune system. Despite polymeric nanoformulations and scaffolds being used to ferry molecular cargo, targeted delivery to specific cells, and interact with biological molecules, the innate potential of the polymers to influence the immune system is still little understood. From this perspective, this review discusses the very commonly used natural polysaccharides, which are also polymers, and their innate immunomodulatory potentials, mostly focusing on the molecular pathways influenced by the polysaccharides in the immunomodulation process. Further, the challenges associated with the application of polysaccharides and the potential solutions have also been discussed.
Purification and Surface Modification of Chitosan-based Polyplexes Using Tangential Flow Filtration and Coating by Hyaluronic Acid
2022, Journal of Pharmaceutical Sciences
Citation Excerpt :
Large scale mixing using a fully Automated In-line Mixing System (AIMS) has been developed and demonstrates reproducible production of CS/pDNA and CS/siRNA polyplexes with improved size and polydispersity (PDI).10 Despite the in vivo potential of CS-based polyplexes,1,13-17 intravenous (IV) administration remains problematic due to hemolysis and hemagglutination of red blood cells (RBCs) following polymer-blood interaction18,19 even at relatively low concentrations.20 The interaction between the positively charged CS molecules (i.e. positively charged polyplexes, and the uncomplexed proportion fraction of CS in solution) and the anionic charges on the surface of RBCs induces stress to the cell membranes leading to an eventual rupture.18-20
Chitosan (CS)-based polyplexes are produced by spontaneous electrostatic association with nucleic acids using CS in excess. Interactions of positively charged polyplexes, and the unbound CS, with negatively charged blood components limit the applicable dosage of such polymeric nanoparticles (NPs) and development of formulations with improved hemocompatibility and transfection efficiency is needed. Here, we introduce a strategy based on Tangential Flow Filtration (TFF) to remove unbound CS, concentrate polyplexes and subsequently coat with hyaluronic acid (HA) to improve hemocompatibility and bioactivity. Optimal TFF conditions were established. A library of HA with different molecular weights and degrees of sulfation was used at different carboxyl + sulfate to phosphate ratios for polyplex coating, bioactivity and hemocompatibility assessment. A systematic optimization of TFF conditions allowed for purification of polylpexes from excess unbound CS and subsequent coating with HA. Except for high molecular weight HA, for which macroscopic aggregation was observed, both sulfated and non-sulfated HAs resulted in small sized and homogenous coated complexes. However, sulfated HAs displayed higher stability during the second filtration process indicating their stronger binding affinity to polyplexes. Finally, we found that low molecular weight HA-coated polyplexes have equivalent silencing efficiency in vitro and improved hemocompatibility compared to uncoated polyplexes.
Chitosan: A review of molecular structure, bioactivities and interactions with the human body and micro-organisms
2022, Carbohydrate Polymers
Chitosan has many desirable attributes e.g. antimicrobial properties and promoting wound healing, and is used in various applications. This article first discusses how degree of deacetylation (DD) and molecular weight (MW) impacts on what level of bioactivities chitosan manifests, then introduces the “molecular chain configuration” model to explain various possible mechanisms of antimicrobial interactions between chitosan with different MW and different types of bacteria. Similarly, the possible pathways of how chitosan reacts with cancer and the body's immune system to demonstrate immune and antitumor effects are also discussed by using this model. Moreover, the possible mechanisms of how chitosan enhances coagulation and wound healing are also discussed. With these beneficial bioactivities in mind, the application of chitosan in surgery, tissue engineering and oncology is outlined. This review concludes that as chitosan demonstrates many beneficial bioactivities via multiple mechanisms, it is an important polymer with a promising future in medicine.
Epinephrine-entrapped chitosan nanoparticles covered by gelatin nanofibers: A bi-layer nano-biomaterial for rapid hemostasis
2021, International Journal of Pharmaceutics
Uncontrolled hemorrhage accounts for significant death risk both in trauma and surgery. Various bleeding control techniques have been emerged to augment hemostasis, which still has several limitations and drawbacks. In this study, epinephrine-entrapped chitosan nanoparticles were electrosprayed on a base pad and covered by a gelatin nanofiber layer (E-CS-Gl. Physico-chemical characteristics, hemocompatibility, cytotoxicity, and blood coagulation tests were studied in-vitro, and blood coagulation and hemostasis potential tests were performed in-vivo. The in-vitro results showed that the prepared nano-biomaterial is cytocompatible against HuGu cells. Also, hemocompatibility studies showed that PT and aPTT times did not change in comparison with the controls. Further blood coagulation study indicated that E-CS-Gl provides an ultimate interface to induce red blood cell absorption and aggregation, resulting in augmented blood coagulation. E-CS-Gl also caused rapid clotting in rat models of ruptured femoral artery and liver compared to controls. Findings exhibited that E-CS-Gl is a safe and effective hemostatic agent and provides a new approach for fast and safe hemorrhage control.

View all citing articles on Scopus

View full text

Research paperEvaluation of the biological properties of soluble chitosan and chitosan microspheres

Abstract

Eur. J. Pharm. Sci.

Int. J. Pharm.

Int. J. Pharm.

Int. J. Pharm.

Biomaterials

Microencapsulation of DNA within alginate microspheres and crosslinked chitosan membranes for in vivo application

Appl. Biochem. Biotechnol.

In vitro evaluation of biocompatibility of different wound dressing materials

J. Mater. Sci. Med.

Evaluation of the biological properties of chitosan and chitosan microspheres

Preparation and characterisation of chitosan microspheres by spray drying

Research paper
Evaluation of the biological properties of soluble chitosan and chitosan microspheres