Original paper
Study on the sample size required for the estimation of mean particle diameter

https://doi.org/10.1016/S0921-8831(08)60447-1Get rights and content

Abstract

Statistical error caused by sample size (i.e. number of sample particles) has been studied by use of a computer simulation. Simulated results were compared with the theoretical equation in which a log-normal size distribution was assumed. The theory gave general analytical solutions for the distribution of sample mean diameter and the number of particles required to achieve a measurement within a certain error under a given confidence level. The computer simulation confirmed the theory. Therefore, the error caused by an inadequate number of sample particles or number of particles required in a measurement can be analytically estimated. It was also found that the number of particles required is reduced by both the evaluation basis and the assigned admissible error. However, fairly large numbers of particles are required for precise measurement.

References (3)

  • H. Masuda et al.

    Theoretical study of the scatter of experimental data due to particle- size-distribution

    J. Chem. Eng., Japan

    (1971)
There are more references available in the full text version of this article.

Cited by (59)

  • Influence of electron landing energy on the measurement of the dimensional properties of nanoparticle populations imaged by SEM

    2021, Ultramicroscopy
    Citation Excerpt :

    SEM measurements were performed by varying LE in the range between 1 keV and 10 keV for silica NPs (ERM®-FD101b and ERM®-FD304) or between 2 keV and 10 keV for gold NPs (nPSize 1). In order to consider a sufficiently representative population of the sample, at least 250 NPs were measured to build the distribution histogram and evaluate the number-weighted area-equivalent modal diameter (DNWAE) of the studied population at each selected LE [17, 25–27]. Table 3 gives an example of the corresponding uncertainty (usampling) for each population for LE equal to 3 keV.

View all citing articles on Scopus
View full text