Elsevier

Energy Procedia

Volume 114, July 2017, Pages 2243-2251
Energy Procedia

Effect of PEI Impregnation on the CO2 Capture Performance of Activated Fly Ash

https://doi.org/10.1016/j.egypro.2017.03.1361Get rights and content
Under a Creative Commons license
open access

Abstract

In the bid to develop cheaper adsorbents for CO2 capture applications, this work investigates the impact of polyethylenimine (PEI) impregnation on the performance of an activated fly ash material for CO2 capture. The fly ash was activated by fusing with NaOH and then subjecting to hydrothermal treatment to derive more porous zeolitic phases which were subsequently loaded with Polyethylenimine (PEI) using a wet impregnation technique. Two different PEI amines (MW∼600 and MW∼1200) were tested at varying concentrations (15%, 20%, and 25%) to study the effect of molecular weight of the PEI as well the loading percentage on the adsorption performance. The activation resulted in a significant increase in surface area from 11 m2/g in the fly ash to 270 m2/g in the activated fly ash, while the 25% PEI-600 sorbent was found to be the most efficient, giving the highest adsorption capacity of 26 mg/g adsorbent at 70 oC.

Keywords

Fly Ash zeolite
PEI
Amine Impregnation
CO2 capture

Cited by (0)

Peer-review under responsibility of the organizing committee of GHGT-13.