Viscous creep in room-dried unconsolidated Gulf of Mexico shale (II): Development of a viscoplasticity model

https://doi.org/10.1016/j.petrol.2010.03.002Get rights and content

Abstract

Laboratory creep experiments show that compaction of dry Gulf of Mexico shale is a permanent irrecoverable process associated with viscoplastic deformation. In order to find a relatively simple model that can describe such viscoplastic behavior of the dry frame of the shale, we combined the Perzyna viscoplasticity constitutive law with a modified Cambridge clay plastic yield model. The constitutive equation for this model is a power-law function that relates strain rate to the ratio of dynamic and static yield surfaces defined by the modified Cam-clay model. By incorporating the effect of strain hardening on the static yield pressure, we derived an equation relating volumetric creep strain at a constant hydrostatic pressure level to the logarithm of time, which is in good agreement with experimental results. We determined the model parameters by fitting experimental data of creep strain as a function of time. The determined parameters indicate that the yield stress of the hydrostatically loaded shale increases by 6–7% as strain rate rises by an order of magnitude. This demonstrates that the laboratory-based prediction of yield stress (as well as porosity) may be significantly overestimated. Thus, strain-rate calibration is required for weak shales such as those studied here to appropriately estimate physical properties under in situ conditions.

Keywords

creep
shale
viscoplasticity
plastic yield model
yield stress

Cited by (0)

1

Tel.: +1 650 725 9295; fax: +1 650 725 7344.

View Abstract