Orthogonal cutting of fiber-reinforced composites: A finite element analysis
References (25)
- et al.
The cutting process, chips and cutting forces in machining CFRP
Composites
(1983) - et al.
Machinability of glassfiber reinforced plastics and applications of ultrasonic machining
Annals of the CIRP
(1988) - et al.
Investigation into the machining of carbon-fiberreinforced plastics with cemented carbides
Journal of Materials Processing Technology
(1992) - et al.
Effect of fiber direction on surface roughness measurements of machined graphite/epoxy composite
Composites Manufacturing
(1993) - et al.
Orthogonal cutting mechanisms of graphite/epoxy composite. Part I: Unidirectional laminate
International Journal of Machine Tools & Manufacturing
(1995) - et al.
Orthogonal cutting mechanisms of graphite/epoxy composite. Part II: Multi-directional laminate
International Journal of Machine Tools & Manufacturing
(1995) - et al.
Machining of fiber reinforced plastics
Annals of the CIRP
(1985) Machining fiber-reinforced composites
Mechanical Engineering
(1993)- et al.
Traditional and nontraditional machining of fiber reinforced plastic composites
- et al.
Edge trimming on composite surface plies
Manufacturing Review
(1992)
Cutting of CFRP with single edge tools
Tool wear in cutting glass-fiber-reinforced plastics
Bulletin of the JSME
(1983)
Cited by (182)
On the numerical modelling of composite machining
2022, Composites Part B: EngineeringThree-dimensional finite element simulations of milling carbon/epoxy composites
2022, Composite StructuresCutting behavior of flax fibers as reinforcement of biocomposite structures involving multiscale hygrometric shear
2021, Composites Part B: EngineeringNumerical Modeling of the Machining Behavior of Natural Fiber Composites
2021, Encyclopedia of Materials: Composites
Copyright © 1997 Published by Elsevier Ltd.