Hostname: page-component-848d4c4894-x5gtn Total loading time: 0 Render date: 2024-06-04T17:43:09.380Z Has data issue: false hasContentIssue false

Dynamics of bubble growth and detachment from a needle

Published online by Cambridge University Press:  26 April 2006

Hasan N. Oguz
Affiliation:
Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD 2128, USA
Andrea Prosperetti
Affiliation:
Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD 2128, USA

Abstract

Several aspects of the growth and departure of bubbles from a submerged needle are considered. A simple model shows the existence of two different growth regimes according to whether the gas flow rate into the bubble is smaller or greater than a critical value. These conclusions are refined by means of a boundary-integral potential-flow calculation that gives results in remarkable agreement with experiment. It is shown that bubbles growing in a liquid flowing parallel to the needle may detach with a considerably smaller radius than in a quiescent liquid. The study also demonstrates the critical role played by the gas flow resistance in the needle. A considerable control on the rate and size of bubble production can be achieved by a careful consideration of this parameter. The effect is particularly noticeable in the case of small bubbles, which are the most difficult ones to produce in practice.

Type
Research Article
Copyright
© 1993 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Al-Hayes, R. A. M. & Winterton, R. H. S. 1981 Bubble diameter on detachment in flowing liquids. Intl J. Heat Mass Transfer 24, 223230.Google Scholar
Anagbo, P. E., Brimacombe, J. K. & Wraith, A. E. 1991 Formation of ellipsoidal bubbles at a freestanding nozzle. Chem. Engng Sci. 46, 781788.Google Scholar
Blake, J. R., Taib, B. B. & Doherty, G. 1986 Transient cavities near boundaries. Part 1. Rigid boundary. J. Fluid Mech. 170, 479497.Google Scholar
Blake, J. R., Taib, B. B. & Doherty, G. 1987 Transient cavities near boundaries. Part 2. Free surface. J. Fluid Mech. 181, 197212.Google Scholar
Chuang, S. C. & Goldschmidt, V. W. 1970 Bubble formation due to a submerged capillary tube in quiescent and coflowing streams. Trans. ASME D: J. Basic Engng 92, 705711.Google Scholar
Clift, R., Grace, J. R. & Weber, M. E. 1978 Bubbles, Drops and Particles. Academic.
Davidson, J. F. & Schuler, B. O. G. 1960 Bubble formation at an orifice in an inviscid liquid. Trans. Inst. Chem. Engrs 38, 335342.Google Scholar
Frankel, I. & Weihs, D. 1985 Stability of a capillary jet with linearly increasing axial velocity (with application to shaped charges). J. Fluid Mech. 155, 289307.Google Scholar
Fritz, W. 1935 Berechnung des maximale Volume von Dampfblasen. Phys. Z. 36, 379384.Google Scholar
Guerri, L., Lucca, G. & Prosperetti, A. 1982 A numerical method for the dynamics of non-spherical cavitation of bubbles. In Proc. Second Intl Colloq. on Drops and Bubbles (ed. Le Croissette), pp. 175181. Jet Propulsion Laboratory, Pasadena.
Jaswon, M. A. & Symm, G. T. 1977 Integral Equation Methods in Potential Theory and Elastostatics. Academic.
Jenssen, B. M., Ekker, M., Brubakk, A. O. & Sira, A. 1991 Method for producing gas bubbles for use in air-embolism studies. Med. Biol. Engng Comput. 29, 104108.Google Scholar
Kumar, R. & Kuloor, N. R. 1970 The formation of bubbles and drops. Adv. Chem. Engng 8, 256368.Google Scholar
Kurusz, M. 1984 Gaseous micro emboli: sources, causes and clinical considerations. In Proc. AAMI 19th Annual Meeting: Abstracts on the Application of Technology to Health Care, Apr 14–18, 1984 Washington, D.C., p. 44.
Leighton, T. G., Fagan, K. J. & Field, J. E. 1991 Acoustic and photographic studies of injected bubbles. Eur. J. Phys. 12, 7785.Google Scholar
Liow, J. L. & Gray, N. B. 1988 A model of bubble growth in wetting and non-wetting liquids. Chem. Engng Sci. 43, 31293139.Google Scholar
Longuet-Higgins, M. S., Kerman, B. R. & Lunde, K. 1991 The release of air bubbles form an underwater nozzle. J. Fluid Mech. 230, 365390.Google Scholar
Marmur, A. & Rubin, E. 1976 A theoretical model for bubble formation at an orifice submerged in an inviscid liquid. Chem. Engng Sci. 31, 453463.Google Scholar
Matkovitch, V. I. 1984 Microbubble detection in blood. In Proc. 37th Annual Conf. on Engineering in Medicine and Biology 1984, Bethesda, MD, vol. 26, p. 196.
Milne-Thomson, L. M. 1960 Theoretical Hydrodynamics. Macmillan.
Oguz, H. N. & Prosperetti, A. 1989 Surface-tension effects in the contact of liquid surfaces. J. Fluid Mech. 203, 149171.Google Scholar
Ogũz, H. N. & Prosperetti, A. 1990 Bubble entrainment by the impact of drops on liquid surfaces. J. Fluid Mech. 219, 143179.Google Scholar
Pinczewski, W. V. 1981 The formation and growth of bubbles at a submerged orifice. Chem. Engng Sci. 36, 405411.Google Scholar
Plesset, M. S. & Prosperetti, A. 1977 Bubble dynamics and cavitation. Ann. Rev. Fluid Mech. 7, 145185.Google Scholar
Prosperetti, A. 1991 The thermal behaviour of oscillating gas bubbles. J. Fluid Mech. 222, 587616.Google Scholar
Sluyter, W. M., Slooten, P. C., Coprajj, C. A. & Chesters, A. K. 1991 The departure size of pool-boiling bubbles from artificial cavities at moderate and high pressures. Intl J. Multiphase Flow, 17, 153158.Google Scholar
Sutherland, K. M., Derek, D. T. & Gordon, L. S. 1988 Independent control of blood gas po2 and pco2 in a bubble oxygenator. Clin. Phys. Physiol. Meas. 9, 97105.Google Scholar
Tan, R. B. H. & Harris, I. J. 1986 A model for non-spherical bubble growth at a single orifice. Chem. Engng Sci. 41, 31753182.Google Scholar
Titomanlio, G., Rizzo, G. & Acierno, D. 1976 Gas bubble formation from submerged orifices — “simultaneous bubbling” from two orifices. Chem. Engng Sci. 31, 403404.Google Scholar
Tsuge, H. & Hibino, S. I. 1983 Bubble formation from an orifice submerged in liquids. Chem. Engng Commun. 22, 6379.Google Scholar
Tsuge, H., Hibino, S. I. & Nojima, Y. 1981 Volume of a bubble formed at a single submerged orifice in flowing liquid. Intl Chem. Engng 21, 630636.Google Scholar
Wang, Z. & Bankoff, S. G. 1991 Bubble growth on a solid wall in a rapidly-depressurizing liquid pool. Intl J. Multiphase Flow 17, 425437.Google Scholar