Hostname: page-component-848d4c4894-4hhp2 Total loading time: 0 Render date: 2024-05-28T19:53:53.460Z Has data issue: false hasContentIssue false

Properties of the mean recirculation region in the wakes of two-dimensional bluff bodies

Published online by Cambridge University Press:  25 November 1997

S. BALACHANDAR
Affiliation:
Department of Theoretical and Applied Mechanics, University of Illinois at Urbana–Champaign, 104 South Wright Street, Urbana, IL 61801, USA
R. MITTAL
Affiliation:
Department of Theoretical and Applied Mechanics, University of Illinois at Urbana–Champaign, 104 South Wright Street, Urbana, IL 61801, USA
F. M. NAJJAR
Affiliation:
National Center for Supercomputing Applications, University of Illinois at Urbana–Champaign, Urbana, IL 61801, USA

Abstract

The properties of the time- and span-averaged mean wake recirculation region are investigated in separated flows over several different two-dimensional bluff bodies. Ten different cases are considered and they divide into two groups: cylindrical geometries of circular, elliptic and square cross-sections and the normal plate. A wide Reynolds number range from 250 to 140000 is considered, but in all the cases the attached portion of the boundary layer remains laminar until separation. The lower Reynolds number data are from direct numerical simulations, while the data at the higher Reynolds number are obtained from large-eddy simulation and the experimental work of Cantwell & Coles (1983), Krothapalli (1996, personal communication), Leder (1991) and Lyn et al. (1995). Unlike supersonic and subsonic separations with a splitter plate in the wake, in all the cases considered here there is strong interaction between the shear layers resulting in Kármán vortex shedding. The impact of this fundamental difference on the distribution of Reynolds stress components and pressure in relation to the mean wake recirculation region (wake bubble) is considered. It is observed that in all cases the contribution from Reynolds normal stress to the force balance of the wake bubble is significant. In fact, in the cylinder geometries this contribution can outweigh the net force from the shear stress, so that the net pressure force tends to push the bubble away from the body. In contrast, in the case of normal plate, owing to the longer wake, the net contribution from shear stress outweighs that from the normal stress. At higher Reynolds numbers, separation of the Reynolds stress components into incoherent contributions provides more insight. The behaviour of the coherent contribution, arising from the dominant vortex shedding, is similar to that at lower Reynolds numbers. The incoherent contribution to Reynolds stress, arising from small-scale activity, is compared with that of a canonical free shear layer. Based on these observations a simple extension of the wake model (Sychev 1982; Roshko 1993a, b) is proposed.

Type
Research Article
Copyright
© 1997 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)