Abstract
Recent progress on work related to numerical modeling of casting processes at the Industrial Materials Institute (IMI) is presented. Depending on the type of casting process involved, two different modeling approaches are used. The first, applied to simulate laminar or turbulent flow in the cavity of thin wall castings, is based on a 2D shell element model. This has the advantage of being computationally efficient from the CPU standpoint while, at the same time, provides a reasonably accurate solution to the problem. In the second approach, a 3D finite element method is used for parts that are thick (such as in low pressure or gravity casting), or where the problem is associated with both the part and mold (such as in heat transfer calculations). Whatever the technique chosen, in performing numerical modeling, the foundry hopes to use the results to optimize die and part design, as well as to reduce manufacturing costs. By being able to predict filing, solidification, stresses and shrinkage, a good idea of product quality and performance can often be obtained at the initial stage of the product development cycle.
Examples of simulations conducted using an experimental die, an automotive housing and a wheel in an aluminum alloy are given.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
D.C. Wilcox, Turbulence Modeling for CFD (Griffin Printing, Glendale, CA, 1993).
C.A. Hieber and S.F. Shen, A finite element/finite difference simulation of the injection mold filling process, J. Non-Newtonian Fl. Mech. 7, 1 (1980).
K.T. Nguyen, D.M. Gao, and Y. Lauze, Numerical simulation of the filling stage in the pressure die casting process, Proc. 3rd Annual Conference of the CFD Society of Canada (1995), vol. 2, p. 167.
W. Rodi, Turbulence models and their applications in hydraulics-A state of the art review, IAHR (1980).
O.C. Zienkiewicz, The Finite Element Method, 3rd edition (McGraw-Hill, New York, 1977).
K.H. Huebner and E.A. Thornton, The Finite Element Method for Engineers (Wiley Interscience, New York, 1982).
C.W. Hirt and B.D. Nichols, Volume of fluid (VOF) method for the dynamics of free boundaries, J. Comp. Physics 39, 201 (1981).
J.F. Hétu, D.M. Gao, and A. Garcia-Rejon, Effective application of the Lesaint-Raviart method to mould filling dynamics, Proc. 9th Conf. on Num. Meth. in Laminar and Turbulent Flows, edited by C. Taylor and P. Durbetaki (Pineridge Press, Swansea, 1995), p. 1064.
E. Thompson, Use of pseudo-concentration to follow creeping viscous flows during transient analysis, Int. J. Num. Meth. in Fluids 6, 749 (1986).
R.W. Lewis and P.M. Roberts, Finite element simulation of solidification problems, Applied Scientific Research 44, 61 (1987).
C. Bailey, P. Chow, G. Taylor, and M. Cross, Modelling the casting process and predicting residual stresses, NUMIFORM 95, edited by S.F. Shen and P. Dawson (Balkema, Rotterdam, Brookfield, 1995), p. 1107.
D.R.J. Owen and E. Hinton, Finite Elements in Plasticity: Theory and Practice (Pineridge Press Limited, Swansea U.K., 1980).
M. Fortin and A. Fortin, A new approach for the FEM simulation of viscoelastic flows, J. Non-Newtonian Fluid Mech. 32, 295 (1989).
Author information
Authors and Affiliations
About this article
Cite this article
Hétu, JF., Gao, D., Kabanemi, K. et al. Numerical Modeling of Casting Processes. Advanced Performance Materials 5, 65–82 (1998). https://doi.org/10.1023/A:1008686021300
Issue Date:
DOI: https://doi.org/10.1023/A:1008686021300