Issue 2, 2013

Electrochemical preparation of porous MoO3 film with a high rate performance as anode for lithium ion batteries

Abstract

A porous MoO3 film is prepared by electrodeposition on Ni foam substrates and exhibits a capacity of 650 mAh g−1 at a current density of 3 A g−1 as anodes for lithium ion batteries. Electrochemical measurements demonstrate that the outstanding rate performances are due to the improved Li+ diffusion kinetics.

Graphical abstract: Electrochemical preparation of porous MoO3 film with a high rate performance as anode for lithium ion batteries

Supplementary files

Article information

Article type
Communication
Submitted
18 Sep 2012
Accepted
15 Oct 2012
First published
16 Oct 2012

J. Mater. Chem. A, 2013,1, 221-224

Electrochemical preparation of porous MoO3 film with a high rate performance as anode for lithium ion batteries

G. Zhao, N. Zhang and K. Sun, J. Mater. Chem. A, 2013, 1, 221 DOI: 10.1039/C2TA00361A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements