Issue 26, 2015

Facile fabrication of porous carbon nanofibers by electrospun PAN/dimethyl sulfone for capacitive deionization

Abstract

This paper reports a facile method to fabricate porous carbon nanofibers (PCNFs) via electrospinning polyacrylonitrile/dimethyl sulfone (PAN/DMSO2) pristine fibers followed by preoxidation and carbonization. The nanopores were produced due to the removal of DMSO2 during the preoxidation process of the nanofibers, without additional chemical or physical activation processes involved. The specific surface and pore density were tunable by varying the PAN/DMSO2 ratio. The variation in the structure and composition of the nanofibers after heat treatment was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and energy dispersive X-ray spectroscopy. As a free-standing electrode material in electrochemical capacitors, the PCNFs showed an enhanced electrical double layer capacitance characteristic, confirmed by cyclic voltammetry. The PCNFs were used successfully for capacitive deionization (CDI) with an enhanced desalination amount of 8.1 mg g−1, 4.5 times higher than that of pure PAN-based CNFs. The good stability demonstrated that these porous carbon nanofibers could be deployed for CDI application.

Graphical abstract: Facile fabrication of porous carbon nanofibers by electrospun PAN/dimethyl sulfone for capacitive deionization

Supplementary files

Article information

Article type
Paper
Submitted
22 Apr 2015
Accepted
18 May 2015
First published
18 May 2015

J. Mater. Chem. A, 2015,3, 13827-13834

Author version available

Facile fabrication of porous carbon nanofibers by electrospun PAN/dimethyl sulfone for capacitive deionization

H. Pan, J. Yang, S. Wang, Z. Xiong, W. Cai and J. Liu, J. Mater. Chem. A, 2015, 3, 13827 DOI: 10.1039/C5TA02954F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements