Issue 18, 2021, Issue in Progress

Judd–Ofelt parameters and X-ray irradiation results of MNb2O6:Eu3+ (M = Sr, Cd, Ni) phosphors synthesized via a molten salt method

Abstract

Trivalent Eu-activated MNb2O6 (M = Sr, Cd, Ni) ceramic phosphors were produced using the molten salt route, which involves a low sintering temperature and provides improved homogeneity. The photoluminescence (PL) and radioluminescence (RL) spectra of phosphors exhibited characteristic Eu3+ emissions with 5F07Fj transitions, and strong peaks occurred at the 5D07F2 transition. The PL and RL emissions of SrNb2O6:Eu3+ decreased over 3 mol%, while both emissions for CdNb2O6:Eu3+ and NiNb2O6:Eu3+ increased with increasing Eu3+ concentration. The spectral properties of phosphors were evaluated by determining Judd–Ofelt intensity parameters (Ω2, Ω4) from the PL emission spectrum. The quantum efficiencies (ηQE%) of MNb2O6:Eu3+ (M = Sr, Cd, Ni) phosphors with the highest emission were found as 61.87%, 41.89%, and 11.87% respectively. Bandwidths (σe × Δλeff) and optical gains (σe × τ) of MNb2O6:Eu3+ (M = Sr, Cd, Ni) phosphors with highest emissions were found as follows; 24.182 × 10−28, 28.674 × 10−28, 38.647 × 10−28 cm3 and 20.441 × 10−25, 13.790 × 10−25, 3.987 × 10−25 cm2 s, respectively, corresponding to the 5D07F2 transition.

Graphical abstract: Judd–Ofelt parameters and X-ray irradiation results of MNb2O6:Eu3+ (M = Sr, Cd, Ni) phosphors synthesized via a molten salt method

Article information

Article type
Paper
Submitted
25 Dec 2020
Accepted
23 Feb 2021
First published
10 Mar 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 10451-10462

Judd–Ofelt parameters and X-ray irradiation results of MNb2O6:Eu3+ (M = Sr, Cd, Ni) phosphors synthesized via a molten salt method

M. İlhan, M. K. Ekmekçi and İ. Ç. Keskin, RSC Adv., 2021, 11, 10451 DOI: 10.1039/D0RA10834K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements