Issue 5, 2022, Issue in Progress

Investigation of BaO reinforced TiO2–p2O5–li2O glasses for optical and neutron shielding applications

Abstract

The optical and radiation shielding characteristics of 15TiO2-70P2O5 – (15 − x) Li2O-x BaO x = (0 ≤ x ≤ 10 mol%) glasses were reported in this study. The glass status of the investigated samples was established by XRD. Although the molar volume decreases within 39.8–31.2 cm3 mol−1, the density was increased from 2.908 to 4.11 g cm−3 with the addition of BaO. UV-Vis-NIR spectroscopy was utilized for the examination of the optical characteristics of all compositions. Eindiropt. and Ediropt. both increased from 2.7 to 3.07 eV and 2.79 to 3.31 eV, while Eu decreased from 0.368 to 0.295 eV. Furthermore, the Phy-X/PSD code was used to evaluate the gamma-ray shielding parameter. Within the energy range of 15 keV to 15 MeV, the equivalent atomic number, as well as the EBF and EABF parameters, was evaluated. Overall, excellent material properties were detected for a glass with a high BaO content, which could be useful for future optical, shielding, and fast neutron shielding properties.

Graphical abstract: Investigation of BaO reinforced TiO2–p2O5–li2O glasses for optical and neutron shielding applications

Article information

Article type
Paper
Submitted
10 Jan 2022
Accepted
11 Jan 2022
First published
24 Jan 2022
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2022,12, 3036-3043

Investigation of BaO reinforced TiO2–p2O5–li2O glasses for optical and neutron shielding applications

Kh. S. Shaaban, A. M. Al-Baradi and A. M. Ali, RSC Adv., 2022, 12, 3036 DOI: 10.1039/D2RA00171C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements