Issue 5, 2011

Natural clay binder based extrudates of mesoporous materials: improved materials for selective adsorption of natural and biogas components

Abstract

The effects of natural clay binder based extrusion, on the selective adsorption properties of mesoporous materials were investigated in context of natural gas and biogas purification. Two mesoporous adsorbent materials, namely porous clay heterostructures (PCH) and MCM-41 were shaped into cylindrical extrudates, using a natural montmorillite clay binder. The effect of extrusion with clay binder was evaluated in three steps; (i) effects on structural properties, which were studied with low temperature nitrogen adsorption and XRD techniques; (ii) effect on adsorption capacity, which were evaluated with high pressure adsorption isotherms (up to 1000 kPa) for three main natural gas and biogas component gases which are CO2, C2H6, and CH4; (iii) effects of extrusion on selective adsorption properties of materials were investigated, for two commercially significant binary separations (CO2/CH4 and C2H6/CH4). Results show that, in general, extrusion caused an increase in mesoporosity of the final material; but in the case of MCM-41, an increase in microporosity has also been noticed. The order of maximum adsorption was found to be CO2 > C2H6 > CH4 with each material and the capacity of adsorption decreases to a different extent (dependent on gas) on extrusion. Variation in selectivity of these materials with pressure was studied and discussed. Both extrudates show satisfactorily high selectivity values than minimum requisite for an adsorbent to be used in separation process. However among all the four materials, the extrudate of MCM-41 was found most suitable, in terms of separation possibilities/applications.

Graphical abstract: Natural clay binder based extrudates of mesoporous materials: improved materials for selective adsorption of natural and biogas components

Article information

Article type
Paper
Submitted
22 Dec 2010
Accepted
21 Feb 2011
First published
17 Mar 2011

Green Chem., 2011,13, 1251-1259

Natural clay binder based extrudates of mesoporous materials: improved materials for selective adsorption of natural and biogas components

V. K. Saini, M. Pinto and J. Pires, Green Chem., 2011, 13, 1251 DOI: 10.1039/C0GC00940G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements