Issue 2, 2012
From the journal:

Journal of Materials Chemistry

Synthesis, processing, and thermoelectric properties of bulk nanostructured bismuth telluride (Bi2Te3)

Mohsin Saleemi,a   Muhammet S. Toprak,*a   Shanghua Li,a   Mats Johnssonb  and  Mamoun Muhammeda  

* Corresponding authors

a Division of Functional Materials, Royal Institute of Technology (KTH), Electrum 229, Isafjordsgatan 22, Kista, Sweden
E-mail: toprak@kth.se
Tel: +4687908344

b Department of Materials and Environmental Chemistry, Stockholm University, Stockholm, Sweden
E-mail: mats.johnsson@mmk.su.se
Fax: +468152187
Tel: +468162169

Abstract

Bismuth telluride (Bi2Te3) is the best-known commercially used thermoelectric material in the bulk form for cooling and power generation applications at ambient temperature. However, its dimensionless figure-of-merit-ZT around 1 limits the large-scale industrial applications. Recent studies indicate that nanostructuring can enhance ZT while keeping the material form of bulk by employing an advanced synthetic process accompanied with novel consolidation techniques. Here, we report on bulk nanostructured (NS) undoped Bi2Te3 prepared via a promising chemical synthetic route. Spark plasma sintering has been employed for compaction and sintering of Bi2Te3 nanopowders, resulting in very high densification (>97%) while preserving the nanostructure. The average grain size of the final compacts was obtained as 90 ± 5 nm as calculated from electron micrographs. Evaluation of transport properties showed enhanced Seebeck coefficient (−120 μV K−1) and electrical conductivity compared to the literature state-of-the-art (30% enhanced power factor), especially in the low temperature range. An improved ZT for NS bulk undoped Bi2Te3 is achieved with a peak value of ∼1.1 at 340 K.

Graphical abstract: Synthesis, processing, and thermoelectric properties of bulk nanostructured bismuth telluride (Bi2Te3)

About
Cited by
Related
Download options Please wait...

Article information

DOI
https://doi.org/10.1039/C1JM13880D
Article type
Paper
Submitted
10 Aug 2011
Accepted
10 Oct 2011
First published
09 Nov 2011

J. Mater. Chem., 2012,22, 725-730

Permissions

Request permissions

Synthesis, processing, and thermoelectric properties of bulk nanostructured bismuth telluride (Bi2Te3)

M. Saleemi, M. S. Toprak, S. Li, M. Johnsson and M. Muhammed, J. Mater. Chem., 2012, 22, 725 DOI: 10.1039/C1JM13880D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements