Issue 19, 2015

Enhancement of magnetic heating efficiency in size controlled MFe2O4 (M = Mn, Fe, Co and Ni) nanoassemblies

Abstract

The MFe2O4 magnetic nanoparticle nanoassemblies (MNNAs) have been synthesized via thermal decomposition of metal chloride in ethylene glycol (EG) in the presence of ethylenediamine (EDA). The size of the nanoassemblies is controlled in the range of 25–60 nm by manipulation of Fe-precursor mole content to ethylene glycol (EG) content and from 60 to 135 nm by using a bi-solvent mixture of ethylene glycol and polyethylene glycol (PEG-400). In this study, we demonstrate optimization of magnetic fluid heat activation by tailoring the size of MFe2O4 (M = Mn, Fe, Co and Ni) MNNAs. The densely packed nanocrystals within the MNNAs induce strong exchange as well as dipolar interactions between the nanocrystals, which increases the total magnetic moment for MNNAs. Additionally the magnetization (MS, magnetization in a field of 20 kOe) of MNNAs decreases in the order Mn > Fe > Co > Ni due to the cationic distribution of ions with varying magnetic moments in these spinel oxides. A sharp increase of heating efficiency for 25–60 nm assembled particles could be attributed to the collective Néel relaxation of nanocrystals within the assemblies and also due to high particle magnetic moment, which increases with the MNNAs size. Furthermore, among all the MFe2O4 nanoassemblies of various sizes, Fe3O4 MNNAs with an average diameter of 80 nm show an excellent SAR value of 646 W g−1 of Fe3O4 at 247 kHz with an applied AC magnetic field of 310 Oe, which is 4 times higher than that of the single domain assembled nanoparticles. The moderate anisotropy constant and high MS values of Fe3O4 MNNAs make it a most suitable candidate to produce the highest heating power. These magnetic MNNAs are efficient in killing the cancer cells by the application of an AC magnetic field even for a short treatment time of 30 min.

Graphical abstract: Enhancement of magnetic heating efficiency in size controlled MFe2O4 (M = Mn, Fe, Co and Ni) nanoassemblies

Supplementary files

Article information

Article type
Paper
Submitted
24 Oct 2014
Accepted
21 Jan 2015
First published
21 Jan 2015

RSC Adv., 2015,5, 14311-14321

Author version available

Enhancement of magnetic heating efficiency in size controlled MFe2O4 (M = Mn, Fe, Co and Ni) nanoassemblies

J. Mohapatra, S. Nigam, J. Gupta, A. Mitra, M. Aslam and D. Bahadur, RSC Adv., 2015, 5, 14311 DOI: 10.1039/C4RA13079K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements