Issue 4, 2015

Nanostructured La0.7Sr0.3MnO3 compounds for effective electromagnetic interference shielding in the X-band frequency range

Abstract

We report a detailed study on the electromagnetic interference (EMI) shielding effectiveness (SE) properties in La0.7Sr0.3MnO3 (LSMO) nanomaterials. The samples were prepared by a solution chemistry (sol–gel) route at different sintering temperatures. The single-phase samples with grain sizes of 22 and 34 nm showed DC electrical conductivity variation from 0.65 to 13 S cm−1 at room temperature. The application of a high magnetic field resulted in higher conductivity values. The electrical conductivity variation with temperature could be fitted with a variable range hopping mechanism in a limited temperature range. The variation of frequency dependent electromagnetic parameters measured at room temperature within the X-band region is consistent with the electrical conductivity behavior. The complex permittivity and permeability parameters were determined in line with the Nicolson–Ross–Weir algorithm. The LSMO nanomaterial samples showed EMI shielding effectiveness values of up to 19 dB (96.3% attenuation) over the X-band frequency range, making them suitable for microwave radiation shielding in commercial and defense appliances.

Graphical abstract: Nanostructured La0.7Sr0.3MnO3 compounds for effective electromagnetic interference shielding in the X-band frequency range

Article information

Article type
Paper
Submitted
11 Sep 2014
Accepted
19 Nov 2014
First published
20 Nov 2014

J. Mater. Chem. C, 2015,3, 820-827

Author version available

Nanostructured La0.7Sr0.3MnO3 compounds for effective electromagnetic interference shielding in the X-band frequency range

H. A. Reshi, A. P. Singh, S. Pillai, R. S. Yadav, S. K. Dhawan and V. Shelke, J. Mater. Chem. C, 2015, 3, 820 DOI: 10.1039/C4TC02040E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements