Issue 38, 2015

Application of electrodeposited cobalt hexacyanoferrate film to extract energy from water salinity gradients

Abstract

Emission of greenhouse gases and limited amount of fossil fuels lead to the emerging need for renewable and sustainable energy sources. The Gibbs free energy released when river water flows into the sea can be utilized as a source of energy. The Mixing Entropy Battery (MEB) is a novel electrochemical cell which efficiently extracts energy from this natural salinity. It consists of cationic and anionic electrodes. Each of these electrodes interacts selectively with one type of ions. In this work the “MEB” principle is applied. The battery is constructed with two inexpensive and easily prepared electrodes including carbon paste electrode modified by cobalt hexacyanoferrate film (CPE-CoHCF) as cathode, and silver/silver chloride as anode. The feasibility of electrochemical oxidation, reduction and cycling of CoHCF were demonstrated. The AgCl/CPE-CoHCF cell showed the standard cell potential of 0.497 V. A power density of about 24 000 μW g−1 with 65% efficiency was achieved with this system, which is a considerable improvement over previous reported results.

Graphical abstract: Application of electrodeposited cobalt hexacyanoferrate film to extract energy from water salinity gradients

Article information

Article type
Paper
Submitted
05 Mar 2015
Accepted
23 Mar 2015
First published
23 Mar 2015

RSC Adv., 2015,5, 30032-30037

Author version available

Application of electrodeposited cobalt hexacyanoferrate film to extract energy from water salinity gradients

S. Haj Mohammad Hosein Tehrani, S. A. Seyedsadjadi and A. Ghaffarinejad, RSC Adv., 2015, 5, 30032 DOI: 10.1039/C5RA03909F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements