Issue 64, 2016, Issue in Progress

Honeycomb-like CuO/ZnO hybrid nanocatalysts prepared from solid waste generated in the organosilane industry

Abstract

We report the preparation of honeycomb-like CuO/ZnO (CZx/y) nanocatalysts with CuO nanospheres (NSs) adhered with ZnO nanoparticles (NPs) for the Rochow reaction. The synthesis was carried out via adsorption of Cu2+/Zn2+ ions on carbon black (CB) which acted as both the agglomeration inhibitor and the hard template, and followed by calcination in air. The low cost Cu2+/Zn2+ ions were recovered from the solid waste generated in the organosilane industry via a simple ammonia leaching treatment. The samples were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and temperature-programmed reduction. The as-obtained CZx/y nanohybrids had a honeycomb-like structure with large voids and openings among the CuO NSs. When re-used as a Cu-based catalyst for the Rochow reaction, the CZx/y NPs sample with an optimized ratio showed significantly improved dimethyldichlorosilane (M2) selectivity and silicon (Si) conversion as compared with the CuO/ZnO NPs prepared in the absence of CB, discrete CuO or ZnO NPs and the CuO/ZnO NPs with different compositions, mainly due to the unique honeycomb-like structure, smaller crystal size and synergistic electronic effect at the interface between Cu and ZnO in CZx/y NPs.

Graphical abstract: Honeycomb-like CuO/ZnO hybrid nanocatalysts prepared from solid waste generated in the organosilane industry

Supplementary files

Article information

Article type
Paper
Submitted
29 Apr 2016
Accepted
15 Jun 2016
First published
15 Jun 2016

RSC Adv., 2016,6, 59737-59748

Honeycomb-like CuO/ZnO hybrid nanocatalysts prepared from solid waste generated in the organosilane industry

J. Li, H. Liu, Y. Ji, Y. Zhang, G. Wang, Y. Zhu, Z. Zhong, X. Hu and F. Su, RSC Adv., 2016, 6, 59737 DOI: 10.1039/C6RA11132G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements