Issue 34, 2016

A waste biomass derived hard carbon as a high-performance anode material for sodium-ion batteries

Abstract

The utilization of renewable energies has become increasingly urgent for the sustainable development of our society. Energy storage systems are essential in order to efficiently use these energies. Sodium-ion batteries (SIBs) show bright prospect in the application for energy storage markets due to the potential low cost originating from unlimited sources and wide distribution of Na. However, the anode remains a great challenge in the industrialization of SIBs. Hard carbon holds the most promising future among all reported anodes; however, there are still two main shortcomings such as high cost and low initial coulombic efficiency, which limit its application. Here, we report a hard carbon material derived from an abundant and abandoned biomass of corn cobs (HCC) using a simple carbonization method. The HCC shows excellent sodium storage performance with a reversible capacity of ca. 300 mA h gāˆ’1, a high initial coulombic efficiency of 86% and good cycling stability. A prototype sodium-ion battery was prepared to prove the application prospect using HCC1300 as the anode and Na0.9[Cu0.22Fe0.30Mn0.48]O2 as the cathode, exhibiting a high energy density of 207 W h kgāˆ’1 and a long cycle life. These excellent properties demonstrate that HCC is a potential candidate as an anode material for sodium-ion battery application.

Graphical abstract: A waste biomass derived hard carbon as a high-performance anode material for sodium-ion batteries

Supplementary files

Article information

Article type
Communication
Submitted
10 Jun 2016
Accepted
25 Jul 2016
First published
25 Jul 2016

J. Mater. Chem. A, 2016,4, 13046-13052

A waste biomass derived hard carbon as a high-performance anode material for sodium-ion batteries

P. Liu, Y. Li, Y. Hu, H. Li, L. Chen and X. Huang, J. Mater. Chem. A, 2016, 4, 13046 DOI: 10.1039/C6TA04877C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements