Issue 27, 2018

Characterization of visible-light photo-Fenton reactions using Fe-doped ZnS (Fex-ZnS) mesoporous microspheres

Abstract

A series of Fe-doped ZnS (Fex-ZnS) photocatalysts were synthesized using a one-pot hydrothermal method. The physicochemical properties of the as-prepared Fex-ZnS microspheres were characterized by different microscopic and spectroscopic techniques. Fe doping did not obviously change the morphology and crystallinity of ZnS, but effectively broadened the light response range into the visible-light region. Degradation of p-nitrophenol (PNP) was used to evaluate the photocatalytic performance of the Fex-ZnS catalysts under visible light irradiation with the addition of H2O2 to facilitate photo-Fenton-like reactions. The highest PNP removal rate of 83.8% after 180 min of irradiation was achieved under the optimal conditions, including a doping ratio of 6%, a H2O2 concentration of 3 mmol L−1 and a catalyst dosage of 0.8 g L−1. The effects of aqueous/solid mass transfer and intraparticle mass transfer limitations on the PNP degradation reactions were analyzed, indicating that the variations of catalyst size caused by different Fe doping ratios did not affect the photocatalytic reactions in this study. The PNP removal mechanism of the Fex-ZnS photocatalyst with H2O2 addition under visible light irradiation was proposed.

Graphical abstract: Characterization of visible-light photo-Fenton reactions using Fe-doped ZnS (Fex-ZnS) mesoporous microspheres

Supplementary files

Article information

Article type
Paper
Submitted
24 Apr 2018
Accepted
20 Jun 2018
First published
20 Jun 2018

Phys. Chem. Chem. Phys., 2018,20, 18601-18609

Characterization of visible-light photo-Fenton reactions using Fe-doped ZnS (Fex-ZnS) mesoporous microspheres

Q. Wang, P. Xu, G. Zhang, W. Zhang, L. Hu and P. Wang, Phys. Chem. Chem. Phys., 2018, 20, 18601 DOI: 10.1039/C8CP02609B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements