Issue 35, 2018

BiVO4 based high k microwave dielectric materials: a review

Abstract

The BiVO4 material has attracted much attention in recent years due to its active photocatalytic properties under visible light, bright yellow color as a nontoxic pigment, and its high relative permittivity (εr) and Qf (quality factor, Q × resonant frequency, f) as a potential microwave dielectric ceramic. In this review, we introduce the origin, synthesis, crystal structure and phase transitions of the four polymorphic phases of BiVO4: orthorhombic (pucherite), zircon (dreyerite), scheelite monoclinic (clinobisvanite) and scheelite tetragonal. We then precis recent studies on doped BiVO4 ceramics in terms of A site, B site and A/B site complex substitutions. Low sintering temperature (<800 °C) and high εr values could be obtained in some solid solution ceramics and near zero temperature coefficient of resonant frequency (TCF/τf) values could be achieved in layered or granulated particle composite ceramics. Besides, a series of temperature stable high εr microwave dielectric ceramics can also be obtained for many co-fired composite ceramics, such as BiVO4–TiO2, and BiVO4–TiO2–Bi2Ti4O11. The high εr, high Qf value, low sintering temperature and chemical compatibility with some base metals suggest that BiVO4-based materials are strong candidates for both LTCC and other microwave device applications in current 4G and future 5G technologies.

Graphical abstract: BiVO4 based high k microwave dielectric materials: a review

Article information

Article type
Review Article
Submitted
14 May 2018
Accepted
09 Aug 2018
First published
09 Aug 2018

J. Mater. Chem. C, 2018,6, 9290-9313

BiVO4 based high k microwave dielectric materials: a review

D. Zhou, L. Pang, D. Wang and I. M. Reaney, J. Mater. Chem. C, 2018, 6, 9290 DOI: 10.1039/C8TC02260G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements